2. Home
  3. Domestic appliances
  4. Climate control
  5. Household fans
  6. Sunbeam
  7. FA7400

Sunbeam FA7400, Fan FA7400 User manual

  • Hello! I am an AI chatbot trained to assist you with the Sunbeam FA7400 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What safety precautions should be taken when using the fan?
    How do I assemble the fan?
    How do I use the fan?
    What is the Nature mode on the fan?
    What is the Sleep mode on the fan?
    How do I clean the fan?
    What is the warranty period for the fan?
MARKETING
|
CREATIVE
|
PRINTING
|
DIGITAL& POS
19-21 Phillips Road Kogarah NSW 2217
T 02 9588 3655 F 02 9587 6741
P PO Box 447 Ramsgate NSW 2217
W visionmediagroup.com.au
E [email protected]
is a registered trademark.
Need help with your appliance?
Contact our customer service team or visit
our website for information and tips on
getting the most from your appliance.
In Australia
Visit www.sunbeam.com.au
Or call 1300 881 861
In New Zealand
Visit www.sunbeam.co.nz
Or call 0800 786 232
Made in China.
Due to minor changes in design or otherwise,
the product may differ from the one shown in this leaflet.
© Copyright.
Sunbeam Corporation Limited 2010.
ABN 45 000 006 771
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
Unit 3, Building D
26 Vestey Drive
Mt Wellington Auckland
New Zealand
Sunbeam Corporation is a division of GUD Holdings Ltd.
6/11
Sunbeam Remote Controlled
Summit Tower Fan
Instruction Booklet
FA7400 115cm Remote Controlled Tower Fan
Please read these instructions carefully
and retain for future reference.
In the unlikely event that this appliance develops any malfunction
within 2 years of purchase (3 months commercial use) due to
faulty materials or manufacture, we will replace it for you
free of charge.
2 Year Replacement Guarantee
Shouldyouexperienceanydifficulties
with your appliance, please phone our
customerservicelineforadviceon1300
881861inAustralia,or0800786232
inNewZealand.Alternatively,youcan
send a written claim to Sunbeam at the
address listed below. On receipt of your
claim, Sunbeam will seek to resolve your
difficulties or, if the appliance is defective,
advise you on how to obtain a replacement
or refund.
YourSunbeam2YearReplacement
Guarantee naturally does not cover misuse
or negligent handling and normal wear and
tear.
Similarlyyour2YearReplacement
Guarantee does not cover freight or any
other costs incurred in making a claim.
Please retain your receipt as proof of
purchase.
InAustralia,thebenefitsgiventoyouby
this guarantee are in addition to your other
rights and remedies under any laws which
relate to the appliance.
Our goods come with guarantees that
cannotbeexcludedundertheAustralian
Consumer Law. You are entitled to a
replacementorrefundforamajorfailure
and for compensation for any other
reasonably foreseeable loss or damage.
You are also entitled to have the goods
repaired or replaced if the goods fail to be
of acceptable quality and the failure does
notamounttoamajorfailure.
Should your appliance require repair or
service after the guarantee period, contact
your nearest Sunbeam service centre.
ForacompletelistofSunbeam’s
authorised service centres visit our website
or call:
Australia
www.sunbeam.com.au
1300881861
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
New Zealand
www.sunbeam.co.nz
0800786232
26 Vestey Drive, Mt Wellington
Auckland, New Zealand
Important instructions – retain for
future use.
Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 1 - Jul 20, 2011 2:01:54 PM
MARKETING
|
CREATIVE
|
PRINTING
|
DIGITAL& POS
19-21 Phillips Road Kogarah NSW 2217
T 02 9588 3655 F 02 9587 6741
P PO Box 447 Ramsgate NSW 2217
W visionmediagroup.com.au
E [email protected]
11
Care and cleaning
Ensure that your fan is switched off and
disconnected from the power outlet before
cleaning.
•Carefullywipeyourfanusingacleancloth.
Donotuseabrasivecleanersorbrushesto
clean the appliance as these may scratch the
surface.
•Takecarethatexcessivedustdoesnotbuild
up in the air-intake and air-outlet grill, and
clean it occasionally using a dry brush or
vacuum cleaner.
•Storethefaninacooldryplacewhennotin
use, in its original carton if possible.
Troubleshooting guide
If your tower fan fails to operate check the
following:
• Makesuretheelectricaloutletorcircuit
breaker is working.
• Checkforobstructionsaroundtheairintake
grill.
If your remote control fails to operate check the
following:
• Ensurethatyoupointtheremotetowardsthe
front of the fan.
• Checkthatthebatteriesarenotworn.
Replaceifnecessary.
Sunbeams Safety Precautions 1
Safety Precautions For Your Tower Fan 2
Locating Your Tower Fan 3
Features of Your Tower Fan 4
Illuminated Display Screen 5
Remote Control 5
Assembling Your Tower Fan 6
Using Your Tower Fan 8
Troubleshooting Guide 11
Care And Cleaning 11
Contents
10
Using your Tower fan (continued)
Nature mode
Naturemodeprovidesanextralevelof
comfort by simulating the natural rise and
fall of the wind over time. You can use this
mode on any fan speed setting.
TouseNaturemode:
1. Choose a fan speed.
2. Press the
mode
button on either the
towerortheremote.The
will illuminate
on the display screen.
Thefanwillnowvaryitsspeedeveryfew
seconds between the chosen fan speed, each
lowerfanspeed,andoff.Forexample,ifyou
set the fan speed to medium, the actual fan
speed will alternate between medium, low
andoff.TocancelNaturemode,Pressthe
mode
button on either the tower control
panel or the remote until the light is no
longer illuminated on the display screen.
Sleep mode
SleepmodeisidenticaltoNaturemodewith
the added advantage that the highest fan
speedgraduallydecreasesovertime.This
allows you to turn the fan on a high speed
setting last thing at night, knowing that by
the time you are asleep, the fan has switched
itself down to a slower speed.
TouseSleepmode:
1. Choose a fan speed.
2. Press the
mode
button on either the
tower control panel or the remote until the
illuminates on the display screen.
Thefanwillnowoperateinthesamemanner
aswithNaturemode,exceptthatafter30
minutes,themaximumspeedwilldecrease.
Eventually in this mode, the fan switches
down to low speed and alternates between
low and off.
TocancelSleepmode,Pressthe
mode
button on either the tower control panel or
the remote until the
light is no longer
illuminated.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:
• Readcarefullyandsavealltheinstructions
provided with an appliance.
• Alwaysturnthepoweroffatthepoweroutlet
beforeyouinsertorremoveaplug.Remove
by grasping the plug - do not pull on the cord.
• Turnthepoweroffandremovetheplug
when the appliance is not in use and
before cleaning.
• Donotuseyourappliancewithanextension
cord unless this cord has been checked
and tested by a qualified technician or
service person.
• Alwaysuseyourappliancefromapower
outletofthevoltage(A.C.only)marked
on the appliance.
• Thisapplianceisnotintendedforuseby
persons(includingchildren)withreduced
physical, sensory or mental capabilities, or
lackofexperienceandknowledge,unlessthey
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Childrenshouldbesupervisedtoensurethat
they do not play with the appliance.
• Thetemperatureofaccessiblesurfacesmaybe
high when the appliance is operating.
• Neverleaveanapplianceunattendedwhile
in use.
• Donotuseanapplianceforanypurpose
other than its intended use.
• Donotplaceanapplianceonornearahotgas
flame, electric element or on a heated oven.
• Donotplaceontopofanyotherappliance.
• Donotletthepowercordofanappliancehang
over the edge of a table or bench top or touch
any hot surface.
• Donotoperateanyelectricalappliancewith
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
SunbeamAppointedServiceCentre
forexamination,repairoradjustment.
• Foradditionalprotection,Sunbeam
recommend the use of a residual current
device(RCD)withatrippingcurrentnot
exceeding30mAintheelectricalcircuit
supplying power to your appliances.
• Donotimmersetheapplianceinwater
or any other liquid unless recommended.
•Appliancesarenotintendedtobeoperated
bymeansofanexternaltimerorseparate
remote control system.
•Thisapplianceisintendedtobeusedin
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.
Sunbeam’s Safety Precautions
1
Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 2 - Jul 20, 2011 2:01:54 PM
MARKETING
|
CREATIVE
|
PRINTING
|
DIGITAL& POS
19-21 Phillips Road Kogarah NSW 2217
T 02 9588 3655 F 02 9587 6741
P PO Box 447 Ramsgate NSW 2217
W visionmediagroup.com.au
E [email protected]
9
Using your Tower fan (continued)
Using the remote control
1.Removetheremotecontrolfromits
compartment at the top of the tower by
applying downward pressure to the bottom
of the remote as shown.
2. Point the remote towards the control panel
on the front of the tower to operate.
TIMER
MODE
ON/OFF
OSC
ION
MODE
TIMER
SPEED
SPEED
SWING
ION
Changing the batteries
1. Open the rear cover off the remote control
unit.
2.Replacethespentbatterieswith2fresh
AAAbatteriesasshown.
3.Replacetherearcover.
Using the oscillation function
The70degreeoscillationfunctioncanbe
used on any setting.
1.Turntheunitonandselectanyfanspeed.
2. Press the
button on the tower control
panelortheremote.The'osc'iconwill
illuminate and the fan will begin to
oscillate from side to side.
Tostopthefanfromoscillating,simplypress
the button
once again.
Using the auto off timer
Theautoofftimerautomaticallyswitchesthe
fanoffafterapresetnumberofhours.To
activate this feature, simply press the auto
off timer button
on the tower control
panel or on the remote control unit.
1. Press the auto off timer button once to
switch the fan off after 1 hour.
2. Each subsequent press of the auto off
timer button will increase the number
of hours the fan will run before turning
off automatically by 1 hour increments.
Thedisplayscreenwillshowthenumber
of hours left before the fan turns off
automatically.
Tocancelthesetting,keeppressingthe
auto off button until it cycles past 12 hours,
to zero. It will then automatically return to
its normal setting displaying the ambient
roomtemperature.Theautoofftimerwillbe
deactivated and the fan will remain on until
it is switched off manually.
•Donotuseoutdoors.
•Donotrunthecordofthefanundercarpeting.
Donotcoverthecordwiththrowrugs,runners
orotherfloorcoverings.Arrangethecordaway
from traffic areas so that it will not be tripped
over.
•Donotusethisfanintheimmediatesurrounds
of a bath, shower, laundry area or swimming
pool.
•Besurethefanisplacedonadry,even
surface.Donotuseonsoftsurfaces,suchas
beds, where opening may become blocked.
•Keepyourfanawayfromheatsources,
corrosive gases and avoid direct sunlight.
•Thisfanisonlytobeusedwiththebasefitted
and in good condition.
•Disconnectthepowerplugbeforedismantling,
assembling or before cleaning.
•Alwaysunplugthefanwhennotinuseforany
long length of time.
•Thefanmustnotbeusediftheguardsare
damaged in any way.
•Donotinsertorallowforeignobjectstoenter
anyventilationorexhaustopeningsasthismay
cause electric shock or fi re, or damage to the
fan.
•Neverinsertfingers,pencilsoranyother
objectsthroughtheguardswheneverthepower
plug is connected, especially while running.
•Avoidtouchingmobilepartsofthefan.
•Donotattempttomoveyourfanwhilstitis
operating. If your fan needs to be moved,
please ensure that it is turned off and you use
the carry handle on top of the tower.
•Whenscrappingthefanattheendofitsuseful
life, follow local regulations.
Safety Precautions For
Your Tower Fan
2
8
Using Your Tower Fan
Switching the fan on
1. Place the fan on a flat level surface.
2.Inserttheplugintoa230/240Vpower
outlet and turn the power on.
3.Pressthepowerbutton
.
4. Press the fan speed button
to select
low, medium or high depending on your
preference.
Switching the fan off
• Toswitchthefanoff,simplypressthe
power button
.
•Ifyouwillnotbeusingthefanforalength
of time, it is advisable to turn the power
off at the wall socket and unplug the power
cord.
Selecting a fan speed setting
YourSunbeamtowerfanhas3speedsettings
as follows:
• lowspeed Displayscreenshows
2 vertical bars
•mediumspeed Displayscreenshows
4 vertical bars
•highspeed Displayscreenshows
6 vertical bars
Toselectafanspeed,simplypressthe
fan speed button
on the tower or the
remote. Each press of the button will
increase the fan speed and then return
back to the lowest speed again.
Locating Your Tower Fan
1.Alwayslocateyourfanonaflatlevel
surface.
2. Your tower fan should be located in a dry,
cool,wellventilatedlocation.Keepyour
fan away from heat sources, corrosive gases
and avoid direct sunlight.
3.Donotattempttomoveyourtowerfan
whilst it is operating. If your fan needs to
be moved, please ensure that it is turned
off and you use the carry handle at the rear
of the fan.
3
Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 3 - Jul 20, 2011 2:01:54 PM
MARKETING
|
CREATIVE
|
PRINTING
|
DIGITAL& POS
19-21 Phillips Road Kogarah NSW 2217
T 02 9588 3655 F 02 9587 6741
P PO Box 447 Ramsgate NSW 2217
W visionmediagroup.com.au
E [email protected]
7
Assembling your Tower fan (continued)
Join the tower to the base
1. Ensure power cord is unplugged.
2.Turnthetowerupsidedown.
3.Alignthebaseandthebottomofthetower
so that the two bosses on the base line up
with the large holes in the bottom of the
tower as shown. Ensure the power cord is
sitting in the cord track in the base.
4. Push the base down into the bottom of the
tower until is firmly held into position.
Screw the tower to the base
1. Use the 4 screws to secure the tower to
the base.
2. Stand the fan upright. It is now ready
for use.
Figure2
Figure3
Figure4
Features Of Your Sunbeam
Tower Fan
Remote control storage
Whennotinuse,storeyourremotecontrolin
the handy storage compartment on the top of
the fan body.
Illuminated Display Screen
Theilluminateddisplayscreenshowscurrent
settings and the ambient room temperature.
Carry handle
Convenient carry handle allows you to easily
carry your fan from room to room.
Tower Control panel
Thetowercontrolpanelallowsyoutoadjust
fan settings at the touch of a button.
4
air-outlet grill
air-intake grill
6
Join the two halves of the base together
Clip the two halves of the base together.
Assembling Your Tower Fan
Figure1
5
Remote Control
Adjust the fan settings from anywhere in the room using the full function remote control.
Nature and Sleep mode
Whenusedinnature
mode, the fan speed is
randomlyadjusted,giving
the feeling of a natural
breeze.
Sleep mode is designed
to be used when retiring
to bed; the fan speed is
gradually decreased until
the unit is operating on low
speed, and when used in
conjunctionwiththeauto
off timer, will ultimately
switch the unit off.
Fan speed button
Choosefrom3speed
settings, low, medium or
high.
Auto Off Timer button
Theautoofftimerallowsyou
to set your tower fan to turn
off after 1-12 hours.
Ionising Function Button
Whenturnedon,theion
generator releases negative
ions into the air.
Oscillation
Your tower fan oscillates
70°,distributingcoolair
throughout the room.
Power on/off button
Illuminated Display Screen
029
MODE
SPEED
osc
º
C
ON
Ionizer
Oscillation Fan Speed
Nature
Wind Mode
Ambient Room
Temperature
and Timer
Sleep
Wind Mode
Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 4 - Jul 20, 2011 2:01:54 PM
/