Rev. 7/08
CRITICAL DIMENSIONS
(DO NOT SCALE)
Vestige™
Two Handle Widespread
Lavatory Faucet
Models: T6305 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1" MIN. DIA.
3-1/2”
(88mm)
2“ (50mm)
Escutcheon
Dia.
2-7/8”
(72mm)
8
“
(203mm)
2“ (50mm)
Escutcheon
Dia.
5-1/4”
(134mm)
5-5/8”
(142mm)
7-3/8”
(187mm)
Lift
Rod
1-11/32"
(34mm)
QUICK CONNECT
HOSE ASSEMBLY
1-1/4” (32mm) MAX.
DECK THICKNESS
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes hot and cold indicators
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
ICC A117.1and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI