Honeywell CO48PM Owner's manual

Brand: Honeywell

Model: CO48PM

Category: Air filters

Type: Owner's manual

Honeywell CO48PM is a versatile evaporative air cooler designed for personal and indoor use. It provides natural and energy-efficient cooling without the need for a compressor or refrigerant gas. The honeycomb cooling media effectively cools and humidifies the air, reducing the temperature and increasing comfort levels. With three fan speeds, adjustable horizontal louvers, and an automatic swing function, the CO48PM allows for customized airflow and cooling direction.

Portable Evaporative Air Cooler

for Outdoor, Indoor & Commercial Use

OWNER’S MANUAL

Read and save these instructions before use

Model: CO48PM

Power rating: 140 Watts

Voltage rating: 120 Volt AC, 60Hz

For product inquiries or support, visit www.honeywellaircoolers.com

Made in P.R.C.Customer Support : 1-800-474-2147

OFF

COOL

OFF

SPEED

SWING

MAX

MIN

QUICK START GUIDE

Fill with water and plug into a standard

power outlet.

Place near an open door or window.

Note : Evaporative air cooler requires cross ventilation.

Turn ON and enjoy the cooling breeze.

Note: Start with LOW speed and gradually increase

to higher speed for optimum cooling performance.

Note: Please make sure the household power voltage

matches the product specifications.

SECTION

PAGE

1. THANK YOU .........................................................................................................

2. USER TIPS ...........................................................................................................

3. SAFETY ................................................................................................................

4. PARTS DESCRIPTION .........................................................................................

5. USE & OPERATION .............................................................................................

Control Panel ....................................................................................................

Control Knobs ...................................................................................................

6. CLEANING & MAINTENANCE .............................................................................

7. TROUBLESHOOTING GUIDE .............................................................................

8. TECHNICAL SPECIFICATIONS ...........................................................................

9. ELECTRICAL WIRING DIAGRAM ........................................................................

Fill Water ..........................................................................................................

10. SERVICE AND WARRANTY .................................................................................

INDEX

Read all instructions carefully before setting up and operating the cooler, and

please keep this instruction manual for future reference. This manual is designed to

provide you with important information needed to setup, operate, maintain, and

troubleshoot your cooler. Failure to follow these instructions may damage and/or

impair its operation and void the warranty.

THANK YOU

Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler.

For optimum cooling from your cooler, fill the water tank to maximum level and load

ice inside the ice compartment before you turn on your air cooler.

Cooler Location (Important - Please Read!)

Place the cooler in front of an open door or window. Ensure that there is adequate

cross - ventilation in the room by leaving a door or window open opposite the cooler.

Following these guideline will ensure your cooler will work as effectively as possible.

Not an Air Conditioner (Important - Please Read!)

The evaporative air cooler is not an air conditioner as it does not use a compressor

or refrigerant gas. It should not be expected to cool as efficiently as a refrigerated air

conditioner.

USER TIPS

Energy Efficient, No Compressor

Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep

costs low. Warm air is drawn into the cooler and enters the Honeycomb Cooling Media.

Water pumped from the tank pours over the honeycomb media. As the warm air passes

through the media, the water absorbs the heat, naturally cooling and humidifying the air.

A fan propels the cooled air out into the room. This no-compressor system cools natu-

rally, efficiently and inexpensively.

Pump

Water

Honeycomb Cooling Media

Evaporative Air Cooling Mechanism

Warm and

dry air

Cool and

humid air

USER TIPS

Indoor Use

The recommended maximum relative humidity level is 60% or

less, which allows a noticeable temperature decrease. The

temperature decrease will be greater in drier climates

because higher evaporation occurs when the humidity is low.

The evaporative air cooler should not be used in enclosed

spaces. It must be kept level and there must be water in the

water tank. The room should have doors and windows

opened to allow free air flow. The evaporative air cooler works

best when placed near an open window, so that outside air is

drawn into the evaporative air cooler, the air circulates in the

room, then exits via the door. The maximum cooling effect is

felt when a person is in the flow of air coming out of the

evaporative air cooler.

The evaporative air cooler can also be used to humidify dry

air during cool weather. To be used for humidification the

windows and doors should be closed to allow the humidified

air to accumulate.

When the product is used for the first time the Honeycomb Cooling Media will have an

odor which will dissipate in a few hours or so of initial use.

Room with open windows & door

(RECOMMENDED)

Room with closed windows & door

(NOT-RECOMMENDED)

NOTE (Important - Please Read!)

SAFETY

Read And Save These Instructions:

When using electrical appliances, basic safety precautions should always be followed:

OFF

OOL

OFF

SPEED

WING

MAX

MIN

120V - 60 Hz

Shock Hazard

Water Level Indicator

Your cooler runs on 120 Volt AC, 60 Hz current. Check the

household voltage to ensure it matches the appliance's rate

specification.

Before operating the product remove it from its packaging

and check that it is in good condition.

DO NOT operate any product with a damaged cord or plug.

DO NOT run power cord under carpeting, or cover it with

rugs or runners. Keep the cord away from areas where it

may be tripped over.

Always unplug the product before refilling the water tank.

Always unplug the appliance from the power source before

cleaning, servicing or relocating the unit.

Remove the power cord from the electrical receptacle by

grasping and pulling on the power cord plug-end only, never

pull the cord.

DO NOT use the product in areas where gasoline, paint or

other flammable goods and objects are stored.

When using the ''COOL'' setting, check the water tank to

ensure that it is full. Operation of this cooler on the ''COOL''

setting with an empty tank may result in damage to the

water pump.

•

SAFETY

DO NOT attempt to repair or adjust any electrical or

mechanical functions of the cooler, as this may void the

warranty.

DO NOT cover the air inlet or outlet on the appliance as this

may cause motor damage.

DO NOT insert or allow objects to enter any ventilation or

exhaust opening as this may damage the product and could

cause an electrical shock or fire.

DO NOT operate with the Honeycomb media removed as

this will overload and damage the motor.

DO NOT leave the operating appliance unattended for any

extended period of time.

DO NOT let children play with this appliance, packaging or

plastic bags.

If the unit is damaged or if it malfunctions, do not continue to

use it. Refer to the Troubleshooting Guide (page 15) and

contact the service center.

Place the unit on a level floor.

This product is not intended for use in wet or damp

locations.

DO NOT use in bathrooms. Never locate the product where

it may fall into a bathtub or other water container.

Store in a dry area when not in use.

This appliance is not intended for use by persons (including

children or elderly) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

Always grip the side handles to move the cooler.

•

Water / Ice Compartment

Floor Level

SAFETY

Don't use indoor extension cords outside. Look for extension cords specifically marked for

outdoor use. Look for extension cords that have a GFCI (Ground Fault Circuit Interrupter) built

in.

Make sure the amperage rating for the extension cord is higher than the amperage rating for

the appliance. Check labels and owner's manuals on the appliance and the extension cord for

amperage ratings.

Power cords have to be contained. If they must run along the ground, make sure every inch of

them is secured so they will not be tripped over.

The wiring and connections must be waterproof. Be sure the connections (to the air cooler)

never get wet. Your unit is waterproof, but everything attached to it must be waterproof, too.

Set up your unit so it cannot be tripped over or wobble loose. It must rest on a solid support.

•

PARTS DESCRIPTION

OFF

COOL

SPEED

SWING

MAX

MIN

1 Water Inlet and Ice

Loading Compartment

2 Handle

3 Left Honeycomb Panel

4 Lever for Horizontal Louvers

5 Water Tank

6 Casters

7 Horizontal Louvers

8 Water Level Indicator

9 Control Panel

10 Right Honeycomb Panel

11 Continuous Water Supply Connection

12 Drain Plug

13 Backside Honeycomb Panel

14 Power Cord & Plug

15 Rear Grill Removal Screws

16 Water Fill Door

USE & OPERATION

Control Panel

COOL

SPEED

SWING

OFF ON

NOTE:

Speed control may be marked as High / Med / Low in certain units.

Speed / On - Off

Connect to the power supply and turn the Speed knob. The

fan will start. Change the speed from 1 for Low to 2 for

Medium to 3 High. To switch OFF the unit turn the Speed

know to "0".

Cool

To begin cooling the desired area turn the "COOL" switch ON.

The water pump will operate. You can feel the cooler air after

the Honeycomb cooling media is completely wet.

Swing

Turn the "SWING" switch ON. The louvers will begin to move

from right to left automatically. Manually adjust the horizontal

louvers to change vertical airflow.

Horizontal Louvers

Manually adjust the horizontal louvers to change vertical

airflow.

USE & OPERATION

Control Knobs

COOL

OFF ON

SWING

OFF ON

SPEED

To refill the water tank, pull out the Water Fill Door located

on the top of the unit (#16 on Page 8) and fill water to the

Max, as indicated on the Water Level Indicator (#8 on Page 8).

Do not fill water above the Max water level mark.

For maximum cooling performance, put ice cubes inside the

Ice Loading Compartment located on the top of the Air Cooler

(#1 on Page 8).

•

Water can be filled into the air cooler by:

Water Inlet (Manually)

Water / Ice can be put into the tank through the top opening.

There is a hole for water to flow into the tank.

Continuous water supply (Auto Refill)

Connect a garden hose to the continuous water supply inlet.

USE & OPERATION

Filling With Water

Water Inlet (Manually)

Unplug from power when refilling.

CAUTION

Water Inlet

Water Fill Door

Ice Loading

Compartment

•

Securely connect the continuous water supply connector (located on the

lower left side panel #11 on Page 8) to the water supply.

Turn on the water.

The water tank will refill automatically.

The water float valve will detect the water level and will automatically start

or stop the water flow.

Plug the unit into the power supply and turn the unit on.

USE & OPERATION

CAUTION

Unplug from power source before filling

This automated process eliminates the need to manually refill the water tank.

•

Connect the garden hose to the water supply connector (# 11 on Page 8)

Verify that connections are secure and turn on the water.

Installing Hose Adapter And Float Valve

Filling With Water (Continuous Water Supply Connection)

Hose Connectora

•

The cooler is supplied with Honeycomb Cooling Media.

The cleaning frequency for the Honeycomb media depends on local air and water

conditions. In areas where the mineral content of water is high, mineral deposits may build up

on the Honeycomb Cooling Media and restrict air flow. Draining the water reservoir and

refilling with fresh water at least once a week will help reduce mineral deposits. If mineral

deposits remain on the Honeycomb media, the media should be removed and washed under

fresh water. The media should be cleaned every two months or sooner, depending on your

needs.

Do not run the unit in COOL mode with stale water in the tank. Empty the tank and refill it with

fresh water if the water has been standing in the tank for an extended period of time.

For best results, allow the Honeycomb Cooling Media to dry after each use by turning off the

cool function 15 minutes before turning the unit off.

•

Before cleaning, turn the unit off and disconnect from the power source.

Use a damp cloth to remove dirt and dust from the outside of the unit.

Never use abrasive cleaners.

When the unit is not in use, store it in a dry place, out of direct sunlight.

CLEANING & MAINTENANCE

Important - Please Read!

WARNING

•

Turn the power “off” and disconnect the air cooler from the power supply.

Move the unit to a location where it can be drained.

Remove the drain plug and allow the tank to empty(#12 on Page 8).

Refill the water tank up to the maximum level with clean water and drain

it completely.

Fill water tank and rinse at least 2-3 times before use.

After cleaning ensure that the drain plug is back in place.

Plug into the power supply and turn on unit.

CLEANING & MAINTENANCE

Draning and Cleaning The Water Tank

•

Turn off the unit, and unplug the power cord from wall

outlet.

Rotate the unit facing the back panel, and locate the Rear

Grill Removal Screws (#15 on Page 8). Remove the 4

screws with a screw driver.

Pull the rear grill panel, until it is completely removed.

This cooler has Honeycomb cooling media on the right and

left panels. The cleaning and removal procedure is the same

as rear panel.

The Honeycomb cooling media can now be seen. Clean

honeycomb with clean cloth to remove all the dust &

dirt particles.

Once cleaning is finished, reassemble the unit.

Plug into the power supply and turn on unit.

Cleaning The Honeycomb Cooling Media

Water Drain

Plug

Open Screws

The air cooler is now ready to be used. This cleaning process should be repeated monthly to

maintain the integrity of the unit and to remove particles filtered from the air.

TROUBLESHOOTING GUIDE

Customer Support: 1-800-474-2147

No discharge of air Cord is not plugged in.

Power is not on.

Not Cooling / Unit is

making noise

Pump is not turned ON.

Refill water tank.

Odors When the Cooler is new.

If the Cooler has been used.

Contact service center.

PROBLEM POSSIBLE CAUSE SOLUTION

Make sure power cord is

plugged in and the supply

switch is on.

Turn the unit ON by pressing

button on the control panel.

On Control Panel, turn COOL

FUNCTION to “ON”.

When the unit is used for the

first time, the Honeycomb

Cooling Media will have an

odor, which will dissipate

within a few hours of initial use.

There may be an algae issue.

Replace the Honeycomb

Cooling Media.

Low or no water in tank, when

COOL is selected.

Damaged Pump or Calcium

deposits on blower.

TECHNICAL SPECIFICATIONS

MODEL NO. CO48PM

120 V

60 Hz

140 Watts

12.6 Gallon

Honeycomb

24.40(L) X 14.76(W) X 34.17(H)

29.3 lbs

Voltage

Frequency

Wattage

Water Tank Capacity

1.83A

Ampere

Cooling Media

Product Dimension (inches)

Net Weight

ELECTRICAL WIRING DIAGRAM

1-YEAR LIMITED WARRANTY

Read all the instructions before attempting to use this product.

This 1 year limited warranty applies to repair or replacement product found to be defective in

material or workmanship

This warranty does not apply to any damage resulting from commercial, abusive, unreasonable

use or supplemental damage. Defects that are the result of normal wear and tear will not be

considered manufacturing defects under this warranty.

JMA NORTH AMERICA LLC IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES OF ANY NATURE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION

TO THE DURATION OF THIS WARRANTY.

Some jurisdictions do not allow the exclusion or limitation of incidental or consequential

damages or limitations on how long an applied warranty lasts, so the above limitations or

exclusions may not apply to you. This warranty gives you specific legal rights, and you

also may have other rights which vary from jurisdiction to jurisdiction. This warranty

applies only to the original purchaser of this product from the original date of purchase.

At its option, JMA NORTH AMERICA LLC will repair or replace this product if it is found to be

detective in material or workmanship.

This warranty does not cover damage resulting from any unauthorized attempts to repair or

from any use not in accordance with the instruction manual.

SERVICE AND WARRANTY

Page is loading ...

Honeywell CO48PM Owner's manual

Brand: Honeywell

Model: CO48PM

Category: Air filters

Type: Owner's manual

Download PDF

report

Honeywell CO48PM Owner's manual

Honeywell CO48PM Owner's manual

Related papers

Other documents