Dish Network DISH Pro Plus Quick Reference Manual

Dish Network
Brand
Dish Network
Model
DISH Pro Plus
Type
Quick Reference Manual

This manual is also suitable for

DISH Pro & DISH Pro Plus Installation Quick Reference Guide
DISH Pro (DP) Products
DP Single LNBF
DP Dual LNBF
DP Twin LNBF
DP Quad LNBF
DP21 Switch
DP34 Switch
DP Adapter for Legacy
receivers
DISH Pro Plus (DP Plus) Products
DP Plus Twin LNBF
DP Plus 44 Switch
DP Plus Separator
139208
TWO ORBITAL LOCATIONS
DISH 500
Two Orbital Locations, 2 Tuners Two Orbital Locations, 4 Tuners
(1) DP Twin on a DISH 500
DP SINGLE TUNER DP SINGLE TUNER
Or one DP Plus Dual Tuner Receiver
DISH 500
(1) DP Quad on a DISH 500
Or any combination of DP Single and DP Plus Dual-Tuner Receivers
with a maximum of 4 Tuner Inputs
DP SINGLE TUNER DP SINGLE TUNER
DP PLUS DUAL TUNER
DISH 500
Two Orbital Locations
using a DP Plus Twin
(1) DP Plus Twin on a DISH 500
(1) DP Plus Separator
DP PLUS DUAL TUNER
DP SINGLE TUNER
Single Legacy receiver installations are not supported.
Or Legacy Receiver
DP SINGLE TUNER
DP SINGLE TUNER
DISH 500
Two Orbital Locations, 6 Tuners
(1) DP Quad on a DISH 500
(1) DP34 Switches
To Receiver Tuner Inputs
DP SINGLE TUNER
LEGACY TUNER
DISH 500
Two Orbital Locations with a
Legacy Receiver
(1) DP Twin on a DISH 500
(1) DP Adapter for each Legacy Receiver
Grounding according to the National Electric Code (NEC) and all local electrical codes is required.
THREE ORBITAL LOCATIONS
DISH 500
DISH 500
Three Orbital Locations, up to 4 Tuners
(1) DP Twin on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
(1) DP34 Switch
To Receiver
Tuner Inputs
DP SINGLE TUNER
DP PLUS DUAL TUNER
LEGACY TUNER
DISH
500
Three Orbital Locations with a Legacy Receiver
(1) DP Twin on a DISH 500
(1) DP Dual on a DISH 500 with I-Bracket
(1) DP34 Switch
(1) DP Adapter for each Legacy Receiver
DISH 500
DISH 500
Three Orbital Locations, up to 12 Tuners
(1) DP Twin on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (3) DP34 Switches
To Receiver Tuner Inputs
DISH 500
DISH 500
Three Orbital Locations, with DP Plus Twin
(1) DP Plus Twin on a DISH 500
(1) DP Dual on a DISH 500
with I-Bracket
(1) DP Plus Separator
DP PLUS DUAL TUNER
DP SINGLE TUNER
Or Legacy Receiver
DISH 500
DISH 500
Three Orbital Locations, up to 24 Tuners
(1) DP Quad on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (6) DP34 Switches
To Receiver Tuner Inputs
To Receiver Tuner Inputs
DP SINGLE TUNER
DP SINGLE TUNER
Or Legacy Receiver
with an adapter
DISH 500
DISH 500
Three Orbital Locations, up to 2 Tuners
(1) DP Twin on a DISH 500
(1) DP Dual on a DISH 500
with I-Bracket
(2) DP21 Switches
Grounding according to the National Electric Code (NEC) and all local electrical codes is required.
Single Legacy installations are not supported. Installations with
two Legacy receivers cannot view the third orbital location.
Each switch must have a connected receiver to supply power
Each switch must have a connected receiver to supply power
FOUR ORBITAL LOCATIONS
Four Orbital Locations, up to 48 Tuners
To Receiver Tuner Inputs
To Receiver
Tuner Inputs
DP Plus 44 DP Plus 44 DP Plus 44
(1) SuperDISH (110°, 119°, 105° or 110°, 119°, 121°)
(1) DP Dual on DISH 500 with I-Bracket (61.5° or 148°)
(2) DP-approved Splitters for any single port SuperDISH LNBs
Up to (6) DP Plus 44 Switches
SuperDISH
DISH 500
DP Plus 44 Switch Connectivity
Power Inserter
DP PLUS DUAL TUNER
DP SINGLE TUNER
DP SINGLE TUNER
Or Legacy Receiver
Or Legacy Receiver
105° or 121° FSS to Port 4
105° or 121° FSS to Port 4
110° or 119°
105° or 121° FSS to Port 4
DP PLUS DUAL TUNER
DP Plus 44
(1) SuperDISH (110°, 119°, 105° or 110°, 119°, 121°)
(1) DP Dual on DISH 500 with I-Bracket (61.5° or 148°)
(1) DP Plus 44 Switch with Power Inserter
DP Plus Separator(s) as needed for single cable/dual tuner
installations
SuperDISH
DISH 500
61.5° or 148°
Four Orbital Locations, up to 24 Tuners
To Receiver Tuner Inputs
DP Plus 44 DP Plus 44 DP Plus 44
SuperDISH
(1) SuperDISH (110°, 119°, 105° or 110°, 119°, 121°)
(1) DP Dual on DISH 500 with I-Bracket (61.5° or 148°)
Up to (3) DP Plus 44 Switches
DISH 500
Each DP Plus 44 Switch requires a Power Inserter on port 1
Each DP Plus 44 Switch requires a Power Inserter on port 1
Each DP Plus 44 Switch requires a Power Inserter on port 1
See DP Plus 44 User's Guide for dish to switch connecting requirements
when used with Legacy receivers
105° or 121° FSS
to Port 4
Grounding according to the National Electric Code (NEC) and all local electrical codes is required.
DISH Pro & DISH Pro Plus Installation Considerations
Rev. 03/28/05
LNBFs AND SWITCHES
• DISH Pro LNBFs work with DISH Pro Plus switches. The DISH Pro Plus Twin functions the same as a
DISH Pro Twin LNBF when connected to any DISH Pro Plus switch.
• Legacy LNBFs and switches can not be used with DISH Pro or DISH Pro Plus LNBFs and switches.
• The maximum recommended cable length is 200 feet from the LNBFs to the furthest DISH Pro or
DISH Pro Plus receiver (150 feet for Legacy receivers).
• When mounting switches, position according to instructions on the label.
• Use drip loops to direct water away from F-connectors.
LEGACY RECEIVER INSTALLATIONS
• The DISH Pro Adapter must be used to connect any Legacy satellite receivers to a DISH Pro LNBF or
Switch.
o Legacy Receivers include:
Models 1000, 2000, 3000, 4000, 5000
Models 2700/2800/3700, 3800/3900, 4700/4900, 6000 (SuperDISH compatible)
DISHPlayer Models 7100, 7200
All OEM-equivalent models (e.g. RCA, JVC, Phillips)
• The DISH Pro Adapter is NOT needed when a Legacy receiver is directly connected to a
DISH Pro Plus LNBF or Switch.
DISH PRO PLUS (DP PLUS) RECEIVERS
DP Plus receivers can be connected with a single cable to DP Plus switches or LNBFs when used with a
DP Plus Separator. See the “Receiver LNBF/Switch Compatibility Chart” for details.
SINGLE-CABLE, DUAL-TUNER INSTALLATIONS
• Three DISH Pro Plus components must be connected together for this type of installation:
o DISH Pro Plus LNBF or Switch
o DISH Pro Plus Separator
o DISH Pro Plus (dual-tuner) receiver
• Two single-tuner receivers cannot be connected to a DP Plus Separator – they are not DISH Pro Plus
receivers.
INSTALLATION MATERIALS
Materials used in a DISH Pro or DISH Pro Plus installation must be rated to 2150 MHz and pass
DiSEqC 22 KHz tone. These materials include:
• RG-6 cable • Line amps
• Ground blocks • Barrel connectors
• Diplexers • Wall plates
• Splitters • Surge protectors
DISH Network Retailers, please refer to the latest “DISH Pro Approved Accessories List” located on the
Retailer Care Site.
FOR MORE INFORMATION (available on the Retailer Care Site):
• “Quick Facts” and “Installation Considerations” documents for:
o DISH Pro Plus Technology
o DISH Pro Plus 44 Switch
o DISH Pro Plus Twin
o DISH Pro Plus Separator
o Single-Cable, Dual-Tuner Installations
• Installation Guides
• Distribution Diagrams
Copyright © 2005 EchoStar Technologies Corporation, Englewood, Colorado 80112. All rights reserved.
Receiver & LNBF/Switch Compatibility Chart
Legacy LNBFs &
Switches
DISH Pro LNBFs DISH Pro Switches DISH Pro Plus LNBFs
DISH Pro Plus
Switches
Single, Dual, Twin, Quad
SW21, SW42, SW44,
SW64, SWAJ
DP Single, DP Dual
DP Twin, DP Quad
DP21
DP34
DP Plus Twin DP Plus 44
Legacy Receiver
Yes Yes, with DP Adapter Yes, with DP Adapter Yes
DISH Pro Receiver
Yes Yes Yes Yes Yes
DISH Pro Plus
Receiver
Yes Yes Yes Yes Yes
DISH Pro Plus
Receiver with
DP Plus Separator
No No No Yes Yes
LNBF & Switch Connectivity Chart
DISH Pro LNBFs DISH Pro Switches DISH Pro Plus LNBF DISH Pro Plus Switches
DP Single, DP Dual,
DP Twin, DP Quad
DP21
DP34
DP Plus Twin DP Plus 44
Legacy LNBFs or
Switches
No No
No
No
No
No
DISH Pro LNBFs
--- Yes
Yes – DP Single or DP Dual
using DP Plus Twin’s input port
Yes
DISH Pro Switches
Yes Yes
DP34-Yes, but DP34(s) will not have DP
Plus capabilities or 4
th
orbital location
DISH Pro Plus Twin
Yes – DP Single or DP
Dual using DP Plus Twin’s
input port
---
Yes – LNBF’s input port will be disabled.
DP Plus capabilities will occur within the
DP Plus switch
DISH Pro Plus 44
Switch
Yes
DP34-Yes, but DP34(s) will not have DP
Plus capabilities or 4
th
orbital location
Yes – LNBF’s input port will be
disabled. DP Plus capabilities
will occur with`in the DP Plus
switch
Yes
One, with additional receiver.
Two, but only viewing 110° and 119°
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Dish Network DISH Pro Plus Quick Reference Manual

Dish Network
Brand
Dish Network
Model
DISH Pro Plus
Type
Quick Reference Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents