Educational Insights Design & Drill® Race Car Product Instructions

Type
Product Instructions

This manual is also suitable for

Start your engines with build ‘n’ play fun from Design
& Drill! First, build the race car by snapping the pieces
together. Then, use the motorized mini-drill to secure with
bolts. Finally, add artistic flair with the colorful, decorative
stickers. Once the race car is ready to hit the track,
use kid-power to go full-throttle!
Coche de carreras Taladrar y Crear
Voiture de course Perçage et création
Rennwagen zum Schrauben und Stecken
•Race car body
7 Snap-on parts
15 Clear bolts
Decorative stickers
Motorized mini-drill
Socket bit
ContEntS
E I - 4 1 3 1
Ages/Años/
Ans/Jahre
3+
4131 RaceCar_Guide.indd 3 10/7/15 4:14 PM
1
Snap together
the parts
Encaja las piezas.
Encliquetez les pièces
ensemble.
Stecken Sie alle Teile
zusammen.
Getting Started
1. Insert 3 AAA batteries into battery compartment of the mini drill (see
Battery Installation and Instructions in this guide).
2. Help your child snap the bit into the mini-drill.
3. Point out the two positions of the power switch — forward and reverse.
Let your child experiment with the different positions.
Building the Design & Drill
®
Power Play Vehicle
Race Car
Coche de carreras Taladrar y Crear
Voiture de course Perçage et création
Rennwagen zum Schrauben und Stecken
4131 RaceCar_Guide.indd 4 10/7/15 4:14 PM
2
Usa la mini taladradora con motor para atornillar los pernos transparentes en los agujeros
del coche de carreras. Asegúrate de que las siete piezas de encaje se hayan fijado con
pernos para evitar que se pierdan durante el juego.
Utilisez la mini perceuse motorisée pour visser les boulons transparents dans les trous de la
voiture de course. Veillez à fixer les sept pièces encliquetables avec des boulons pour éviter
de les perdre lors du jeu.
Mit dem batteriebetriebenen Minibohrer werden die transparenten Schrauben in die Löcher
am Hubschrauber geschraubt. Die sieben Aufsteckteile müssen mit den Schrauben gesichert
werden, da sie sonst während des Spielens verloren gehen können.
Use the motorized
mini drill to screw
the clear bolts into
the holes of the race
car. Make sure the
seven snap-on parts
are secured with
bolts to prevent
parts from being lost
during play.
Customize your
vehicle with the
ultra cool stickers!
3
¡Personaliza el vehículo con los adhesivos proporcionados!
Personnalisez votre voiture avec les autocollants fournis!
Anschließend kann der Hubschrauber mit den mitgelieferten Aufklebern verziert werden!
4131 RaceCar_Guide.indd 5 10/7/15 4:14 PM
Battery Installation and Instructions
Drill requires three AAA batteries, not included.
Batteries must be inserted with the correct polarity.
Do not mix old and new batteries.
Do not recharge non-rechargeable batteries.
Do not use rechargeable batteries.
Do not mix different types of batteries: alkaline, standard (carbon
zinc), or rechargeable batteries.
Only use batteries of the same or equivalent type.
Remove exhausted batteries from the unit.
Do not short-circuit the supply terminals.
To prevent corrosion and possible damage to the product, it is
recommended to remove the batteries from the unit if it will not be
used for more than two weeks.
Cleaning instructions: Clean product with a damp or dry cloth —do
not immerse or spray any liquid or water on product.
+
+
-
+
-
-
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
4131 RaceCar_Guide.indd 6 10/7/15 4:14 PM
Make sure to check out the other Power Play
Vehicles for more building, revving fun!
EI-4130 Helicopter
EI-4132 Monster Truck
4131 RaceCar_Guide.indd 2 10/7/15 4:14 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Educational Insights Design & Drill® Race Car Product Instructions

Type
Product Instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI