STEP 3: How to place the smartphone in
the VR Headset
- Remove the cover from your smartphone
(recommended).
- Take out the smartphone holder by pulling
the edge out from the headset as shown in
Figure 2.
- Place your smartphone in the smartphone holder,
and make sure thesplit line is perfectly aligned with
the center mark on your phone holder as shown in
Figure 3. Close the smartphone holder gently
without moving the smartphone alignment,
as shown in Figure 4.
Note: If your smartphone has side buttons
that are pressed against the plastic use the
foam pads to create space for the buttons, as
explained in page 5.
STEP 4: Wear the VR Headset
- Adjust the straps to fit your head.
- Adjust the lenses to get a clear image:
use the top adjustment buttons to
adjust the lenses left, right, back and
forward as shown in Figure 5.
- You can adjust each eye separately if
necessary.
STEP 5: Controlling the game
Most of the VR apps will require you to
“click” on virtual buttons to start the
game, these virtual buttons can usually
be “clicked” by gazing at them. If that is
the case with your VR app simply gaze
steadily at the button.
Note: Some VR apps require an outer control,
such as a remote control. These apps won’t
work fully without a remote.
3
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5