2. George Kovacs
  3. GKST1004-084

George Kovacs GKST1004-084, GKST1004-467 User manual

  • Hello! I am an AI chatbot trained to assist you with the George Kovacs GKST1004-084 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installing or adjusting Standoff GKST1004/GKST1006/GKST1012/GKST1024
1.Mark location of standoffs on 2.Remove circular mounting piece 3.Place screw through mounting piece.
ceiling.Then drill hole for toggle from standoff.
bolt,if location is on ceiling joist
drill pilot hole for wood screw.
4.Feed toggle into drilled hole 5. Secure the standoff assembly to the 6.Use the Allen wrench provided to loosen the
and tighten.
threaded washer.
set screw(dont remove completely),and
you can adjust the hight that you
want.Then tighten the set screw.
LA-1236E
The standoff uses the quick adapter to attach to the rail and adjust the standoff for you want
Follow the step-by-step instructions below.
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED
ELECTRICIAN TO ENSURE PROPER WIRING AND
/