Etac Supporter Adjustable toilet arm supports Assembly Instruction

Etac
Brand
Etac
Model
Supporter Adjustable toilet arm supports
Type
Assembly Instruction

This manual is also suitable for

78153D
13-01-02
Etac AB, Box 203, SE-334 24 Anderstorp
Tel. +46/371-58 73 00, Fax. +46/371-58 73 90
www.etac.com
Anpassningsats Hi-Loo/Supporter (t.o.m. ser nr 79767/80741)
Adjustment kit Hi-Loo/Supporter (up to ser no 79767/80741)
Ampassungsatz Hi-Loo/Supporter (bis Ser Nr 79767/80741)
8030 1050
1
2
3
x2
x1
x1
Monteringsanvisning / Assembly instructions / Montageanweisung
FÖRHANDSKOPIA EJ FÖR PRODUKTION/
ADVANCE COPY NOT FOR PRODUCTION
E
Revision
A3
1:5
Appr
Intro
Date
Nr
Modification
1 2 4
3
5
6
B
A
D
C
Informationen på detta dokument är konfidentiell och tillhör Etac AB.
Tillgång får endast den som undertecknat eller omfattas av Sekretessavtal.
The information in this document is confidential and belong to Etac AB.
Access is only granted to those who have signed or are covered by a Non-Disclosure Agreement.
MATERIAL: XXXX
TOLERANS DÄR EJ ANNAT ANGES /
TOLERANCE UNLESS OTHERWISE STATED: SS-ISO 2768 -mK
SS-ISO 1101
ÖVRIGA MÅTT ENLIGT 3D-MODELL
OTHER MEASUREMENTS ACCORDING TO THE 3D-MODEL:
RITNINGSNR_X.IGS/DRAWINGNO_X.IGS
("X" = REVISION ENL RITNING/ACC. TO DRAWING)
FÄRG / COLOUR :
GNISTYTA /
SURFACE TEXTURE : XX VDI
SKARPA KANTER BRYTES/
NO SHARP EDGES
YTBEHANDLING / SURFACE TREATMENT :
PULVERLACK /POWDER PAINT XXX-XXX µm
MÄRKES MED MATERIAL, TILLVERKNINGSÅR & -MÅNAD /
MARKED WITH MATERIAL, MANUFACT. YEAR & -MONTH :
HÖJD / HEIGHT : XX
MAX FILMNING I DELNINGSPLAN /
MAXIMUM FLASH : X.XX TJOCK/THICK & X.XX HÖG/HIGH
SLÄPPNINGSVINKEL DÄR EJ ANNAT ANGES /
ANGLE OF CLEARANCE UNLESS OTHERWISE STATED: X °
VÄGGTJOCKLEK DÄR EJ ANNAT ANGES /
WALL THICKNESS UNLESS OTHERWISE STATED: X
GENERELLA RADIER /
ALL UNSPECIFIED RADIUS : RX
RÖRDIMENSION /
DIMENSION OF PIPE : XX x X
RÖRTOLERANS /
TOLERANCE OF PIPE: DIN XXXX
HYVLAD SÖM/ PLANED SEAM
HÅLKLIPP UTAN KÄRNA DÄR EJ ANNAT ANGES /
HOLE CUT WITHOUT CORE UNLESS OTHERWISE STATED
HÄRDAS /
HARDENED : XX-XX HRC
DRAGHÅLLFASTHET /
TENSILE STRENGTH : XX N
E
A3
1:5
Date
Replaced by
Drawing Nr.
Replaces
Scale
Appr.
Stand.
Contr.
Drawn
Constr.
Appr
Intro
Date
Nr
Modification
1 2 4
3
5
6
B
A
D
C
Informationen på detta dokument är konfidentiell och tillhör Etac AB.
Tillgång får endast den som undertecknat eller omfattas av Sekretessavtal.
The information in this document is confidential and belong to Etac AB.
Access is only granted to those who have signed or are covered by a Non-Disclosure Agreement.
V= mm³
4
5
  • Page 1 1

Etac Supporter Adjustable toilet arm supports Assembly Instruction

Etac
Brand
Etac
Model
Supporter Adjustable toilet arm supports
Type
Assembly Instruction
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents