2. Highwood
  3. AD-PORL1-ACE
AD-PORL1-ACE

Highwood AD-PORL1-ACE Operating instructions

  • Hello! I'm a chat assistant and I've read the Lehigh Collection Lehigh Porch Swing Assembly Guide. I understand that this document provides step-by-step instructions on how to assemble the swing, detailing the parts, tools, and proper bolt usage for each step, as well as chain attachment. Feel free to ask me any questions relating to the assembly guide.
  • What tools are included with the porch swing?
    What customer-supplied tools are needed?
    What size bolts are used to attach the back to the seat?
For information on Care and Cleaning or to Register your
highwood product, please visit www.highwood-usa.com. PAGE 1 OF 2
TOOLS INCLUDED
CUSTOMER SUPPLIED TOOLS
1/2" or 13mm Wrench/Socket
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
Lehigh Collection
Lehigh Porch Swing
Assembly Guide
HARDWARE INCLUDED
AD-PORL1|AD-PORL2
02.26.21
AQty: 6
1/4-20 x 1.5"
STEP 1 BACK
Attach Back to Seat using
(2) A Bolts on each side.
Chain Attachment Kit
5/16-18 x 2" Eyebolt - Qty: 4
5/16-18 Nylon Lock Nut - Qty: 4
5/16 Flat Washer - Qty: 4
HDK-CHAINLONG - Qty: 2
HDK-CHAINSHORT - Qty: 2
Chain Link Connector - Qty: 2
B
1/4-20 x 2"
Qty: 8
C
1/4-20 x 3"
Qty: 2
**
A
BACK
SEAT
For information on Care and Cleaning or to Register your
highwood product, please visit www.highwood-usa.com. PAGE 2 OF 2
AD-PORL1|AD-PORL2
02.26.21
STEPS 2-3 BACK BRACES
Attach Back Brace to Seat
using (2) B bolts on each Back Brace.
Attach Back Brace to Back
using (1) C bolt on each Back Brace.
STEPS 4-5-6 ARMS
Attach Arm to Back
using (1) A Bolt.
Attach Arm to Seat
using (2) B Bolts.
Repeat on other Side.
STEP 7-8-9 CHAIN BOLT
Attach Eyebolt to Back.
Insert bolt through Back, attach
washer and nut on inside of back.
Align Eyebolt as shown and tighten.
Attach Eyebolt to Seat.
Insert bolt through Seat, attach
washer and nut on inside of Seat.
Align Eyebolt as shown and tighten.
Repeat on other side.
STEP 10-11-12-13 CHAIN ATTACHMENT
Attach HDK-CHAINSHORT to back Eyebolt, attach Chain
Link Connector to other end of chain.
Attach HDK-CHAINLONG to seat Eyebolt, guide chain
through hole in Arm and attach to other end of Chain
Link Connector so that arm is level as shown.
Repeat on other side.
Attach ends of HDK-CHAINLONG to structure.
SEAT C
B
BACK
BACK BRACE
ARM
BACK
SEAT
A
B
EYEBOLT
BACK
SEAT
EYEBOLT
HDK-CHAINLONG HDK-CHAINSHORT
CONNECTOR
ATTACH TO
STRUCTURE
/