urban ambiance ULB2030 Installation guide

Type
Installation guide

This manual is also suitable for

Urban ambiance ULB2030 is a lighting fixture that requires assembly before use. It comes with three light bulbs, three glass shades, three socket rings, two mounting screws, two backplate screws, two hex nuts, two ball nuts, a mounting plate with a green ground screw, and three wire connectors.

The ULB2030 can be installed on a wall or ceiling and is compatible with three 60-watt Type A light bulbs. It is important to ensure that the correct branch circuit conductor is used and that the installation is carried out by a licensed electrician to ensure safety.

Urban ambiance ULB2030 is a lighting fixture that requires assembly before use. It comes with three light bulbs, three glass shades, three socket rings, two mounting screws, two backplate screws, two hex nuts, two ball nuts, a mounting plate with a green ground screw, and three wire connectors.

The ULB2030 can be installed on a wall or ceiling and is compatible with three 60-watt Type A light bulbs. It is important to ensure that the correct branch circuit conductor is used and that the installation is carried out by a licensed electrician to ensure safety.


FB
ACG
H
I
DE
J
important safety instructions:
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.

Werecommendinstallationbyalicensedelectrician.
2.Toavoidtheriskoffire,donotexceedtherecommendedwattageofthree
60ͲwattTypeAlightbulbforthisfixture.
assembly instructions:
1. Carefullyunpackandidentifyallpartsreferringtotheillustrationfor
partsidentification.
2. Turnoffpowerattheoutletboxwherethefixturewillbeinstalled.
3. InserttheBackplateScrews(A)intotheMountingPlate(E)and
tightenwiththeHexNuts(C)providedontheBackplateScrews(A).
4. AttachtheMountingPlate(E)tooutletboxusingtheMounting
Screws(D),tightenwithascrewdriver.Ensurethesideofthe
MountingPlate(E)marked“GND”isfacingout.
5. Whileholdingthefixture,connecttheblackwirefromfixturetothe
hotwire(usuallyblackorsmooth)fromtheoutletboxusingaWire
Connector(G).Connectthewhitewirefromfixturetotheneutral
wire(usuallywhiteorribbed)fromtheoutletboxusingaWire
Connector(G).DONOTREVERSETHEHOTANDNEUTRALWIRE
CONNECTIONS;OTHERWISE,SAFETYWILLBECOMPROMISED.
6. Iftheoutletboxhasgroundwire(greenorbarecopper),connect
thegreengroundwirefromthefixturetoitusingaWireConnector
(G).Iftheoutletboxdoesnothaveagroundwire,connectthe
greengroundwireoutletboxfromthefixturetothegreenground
screwprovidedontheMountingPlate(E).
7. Tuckthesewireconnectionsneatlyintotheoutletbox,placethe
Backplate(B)overtheMountingPlate(E)andalignthetwoholeson
theBackplate(B)withtheBackplateScrews(A),securethe
Backplate(B)withtheBallNuts(F)untilthefixtureissecuredtothe
wall.
8. PlacetheGlassShades(H)overthesocketsandsecuretheGlass
Shades(H)inplaceusingtheSocketRings(I).
9.
,QVWDOO WKH SURSHU OLJKW EXOEV - QRW LQFOXGHG LQ DFFRUGDQFH ZLWK WKH
IL[WXUHV VSHFLILFDWLRQV '2 127 (;&((' 7+( 63(&,),(':$77$*(
5$7,1*
10. Installationiscomplete.Turnonpowerattheoutletboxandtest
thelightingofthefixture.
parts enclosed:
AssemblyInstructions
care instructions:
Wipeallsurfaceswithasoft,drycloth.Donotuseanyharshcleaners
(includingammoniaͲbasedproducts)orabrasivesonthefixtureas
theywilldamagethesurface.
(A) BackplateScrew(2)
(B) Backplate(1)
(C) HexNut(2)
(D) MountingScrew(2)
(E) MountingPlate&greengroundscrew(1)
(F) BallNut(2)
(G) WireConnector(3)
(H) GlassShade(3)
(I) SocketRing(3)
(J) LightBulb(3)(NotIncluded)
SKU: ULB2032
  • Page 1 1

urban ambiance ULB2030 Installation guide

Type
Installation guide
This manual is also suitable for

Urban ambiance ULB2030 is a lighting fixture that requires assembly before use. It comes with three light bulbs, three glass shades, three socket rings, two mounting screws, two backplate screws, two hex nuts, two ball nuts, a mounting plate with a green ground screw, and three wire connectors.

The ULB2030 can be installed on a wall or ceiling and is compatible with three 60-watt Type A light bulbs. It is important to ensure that the correct branch circuit conductor is used and that the installation is carried out by a licensed electrician to ensure safety.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI