Page 3 of 4
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may
have come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below.
Read all instructions before assembling and keep these instructions for future reference.
ASSEMBLY INSTRUCTIONS
DO NOT USE SUBTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.COM
WITH SERVICE OR PARTS REPLACEMENT REQUEST
This product is manufactured by RCKF for
K
I
D
S
M
S T
G
R
TM
B
A
1
STEP 2
EB
1
EEB
STEP 3
Attach End Rail (C) to Front Rail (A) and Back Rail (B) using Screw with Screw driver (4)
Attach Partition Panel (E) to Front Rail (A) and Back Rail (B)
A
B
Attach Stabilizer Bar (1) to Front Rail (A) and Back Rail (B)
E
STEP 1 Note : Male & female butterfly
connector + bolts already
pre assembly at factory
- Do the same for other corner
( total 4 corners )
A
C
B
C
CB
4
4