Westin 42-6005 Installation guide

Westin
Brand
Westin
Model
42-6005
Type
Installation guide

This manual is also suitable for

Westin 42-6005 is a triple tube rock rail designed to protect your Jeep Wrangler from rocks, logs, and other obstacles on the trail. It is made from 2" diameter steel tubing and features a welded construction for strength and durability. The Westin 42-6005 rock rail is also coated with a black powder coat finish for corrosion resistance.

In addition to protecting your Jeep, the Westin 42-6005 rock rail can also be used as a step to help you get in and out of your vehicle. It is also a great place to mount accessories such as lights, flags, or antennas.

Westin 42-6005 is a triple tube rock rail designed to protect your Jeep Wrangler from rocks, logs, and other obstacles on the trail. It is made from 2" diameter steel tubing and features a welded construction for strength and durability. The Westin 42-6005 rock rail is also coated with a black powder coat finish for corrosion resistance.

In addition to protecting your Jeep, the Westin 42-6005 rock rail can also be used as a step to help you get in and out of your vehicle. It is also a great place to mount accessories such as lights, flags, or antennas.

1
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-1669-RevA ECO #: W15-0142 DATE: 9/1/16
INSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS,
SNYPER TRIPLE TUBE ROCK RAIL
APPLICATION:
2007-2016 Jeep Wrangler 2 Door
2007-2016 Jeep Wrangler Unlimited 4 Door
PART NUMBER:
42-6005, 42-6015
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
2. Locate mounting location on the vehicle frame. See Figure 1. Note: The 2 door Jeep model will have 2 mounting loca-
tions each side and the 4 door model will have 3 mounting locations each side.
3. Remove (2) factory M10 nuts on each mounting location. Align the Sidearm Rock Slider (Item 1/2) with the mounting lo-
cations and loosely secure using the provided M10 flat washers (Item 3) and the factory M10 nuts. See Figure 2.
Note: There will be extra M10 flat washers for the 2 door J eep model that will not be used.
4. Align and adjust the Rock Rail as necessary and then tighten M10 hardware to 30-35 ft-lbs.
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
1 1 DRIVER ROCK RAIL 15MM SOCKET
2 1 PASSENGER ROCK RAIL 15MM WRENCH
3 12 M10 FLAT WASHERS (YELLOW ZINC) RATCHET
TORQUE WRENCH
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
ITEM 1 ITEM 1
Driver/Passenger Side
Items Opposites
2 DOOR 4 DOOR
Figure 1 Mounting Location
Align Snyper Rock Rail onto factory bolts
after removing the factory M10 nuts.
2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-1669-RevA ECO #: W15-0142 DATE: 9/1/16
CARE INSTRUCTIONS
REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER.
Figure 2
Factory M10 nuts
2 Door Jeep Model Shown
4 Door Jeep Model Similar
INSTALLATION COMPLETE
3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-1669-RevA ECO #: W15-0142 DATE: 9/1/16
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION
AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is defined as required, use
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO
AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY:
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product. Us-
er should never exceed the vehicle manufacturers maximum tow and weight rating regardless of
the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS
VEHICLE DAMAGE.
WARNING
AUTOMOTIVE PRODUCTS, INC.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Westin 42-6005 Installation guide

Westin
Brand
Westin
Model
42-6005
Type
Installation guide
This manual is also suitable for

Westin 42-6005 is a triple tube rock rail designed to protect your Jeep Wrangler from rocks, logs, and other obstacles on the trail. It is made from 2" diameter steel tubing and features a welded construction for strength and durability. The Westin 42-6005 rock rail is also coated with a black powder coat finish for corrosion resistance.

In addition to protecting your Jeep, the Westin 42-6005 rock rail can also be used as a step to help you get in and out of your vehicle. It is also a great place to mount accessories such as lights, flags, or antennas.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents