Tyan Triumph i7520 User manual

http://www.tyan.com

1

Triumph i7520

///

S6623

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Taro and Triumph i7520 are trademarks of TYAN Computer Corporation.

Intel, Xeon, and combinations thereof are trademarks of Intel Corporation.

ATI is a trademark of ATI Technologies Inc.

Phoenix, Phoenix-Award BIOS are trademarks of Phoenix Technologies.

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE,is a trademark of SuSE AG.

Linux is a trademark of Linus Torvalds

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

Table of Contents

Chapter 1: Introduction

1.1 Congratulations Page 5

1.2 Hardware Specifications Page 5

Chapter 2: Board Installation

2.1 Board Image Page 8

2.2 Block Diagram Page 10

2.3 Board Parts, Jumpers and Connectors Page 12

2.4 Mounting the Motherboard Page 25

2.5 Installing the Memory Page 26

2.6 Installing the Processor and Cooling Fan Page 29

2.7 Attaching Drive Cables Page 31

2.8 Installing Add-In Cards Page 33

2.9 Installing Optional SO-DIMM Modules Page 34

2.10 Connecting External Devices Page 35

2.11 Installing the Power Supply Page 36

2.12 Finishing Up Page 37

Chapter 3: BIOS

3.1 Main Menu Page 40

3.2 Advanced Menu Page 43

3.3 Security Menu Page 58

3.4 PC Health Menu Page 59

3.5 Clk/Misc. Menu Page 61

3.6 Exit Menu Page 62

Chapter 4: Diagnostics

4.1 Beep Codes Page 63

4.2 Flash Utility Page 63

4.3 AWARD BIOS Post Code Page 64

Appendix I: How to Make a Driver Diskette

Page 69

Glossary

Page 71

Technical Support

Page 77

http://www.tyan.com

3

Check the box contents!

The retail motherboard package should contain the following:

1 x Triumph i7520 S6623 motherboard

1 x VGA cable

1 x COM Port Cable

1 x PS/2 Cable

1 x TYAN driver CD

1 x Serial ATA cable

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

http://www.tyan.com

4

NOTE

http://www.tyan.com

5

Chapter 1: Introduction

1.1 - Congratulations

Congratulations on your purchase of the powerful Dual Intel processor solution,

the Triumph i7520 S6623. Based on Intel E7520 chipset, the S6623 offers

exceptional performance. Compatible with EPS12V power supplies, the EEB

3.51 form factor S6623 features an onboard ATI ES1000 PCI graphics

controller with 16 MB memory, four Intel 82571EB dual port Gigabit controllers

and 2 SATA ports from ICH5R, which provides a versatile solution for your

server needs.

Remember to visit TYAN’s Website at http://www.tyan.com. There you can find

information on all of TYAN’s products with FAQ’s, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

Processors

• Two 604-pin sockets support Intel

CPUs of the same type below:

? Xeon Dual Core (Paxville CPU) with

2x2MB L2

? Xeon (Nadona, 1M L2), up to

3.6GHz

? Xeon (Irwindale, 2M L2), up to

3.6GHz

? Xeon LV (Low Voltage) CPU, up to

2.8GHz

• Separated 4-phase VRD for each

CPU

Memory

• Four 240-pin DDR2 sockets support

up to 8GB

• Dual channel memory bus (must be

populated in pairs)

• Registered DDR2 400 compliant ECC

DIMM

• Supports 256MB, 512MB, 1GB and

2GB DIMM

Chipset

• Intel E7520 Memory Controller Hub

LAN Bypass

• Supports Bypass feature over one

pair of LAN ports (LAN 1 & 2)

Front Panel I/O Ports

• One serial port with D-Sub

connector

• Two USB ports with Dual-Stack

USB connector

• 8 RJ45 Connectors (S6623P8B)

• Four of eight LAN ports could be

configured to Optical SFP

connectors (refer to Available

Models)

System Management

• Total 5 fan headers with control

and tachometer monitoring

• Monitors voltage for CPU,

Memory & Power Supply

• Monitors temperature for CPU &

environment

• Onboard LED: LAN bypass, Fault

FED Pin Header: Power LED &

HDD LED

• One pin header for Chassis

http://www.tyan.com

6

• Intel 82801ER I/O Controller Hub

(ICH5R)

• Intel 6700PXH PCI/PCI-X Controller

Hub

Integrated LAN Controllers

• Four Intel 82571EB dual port Gagabit

Controllers

• Configurable with total 8 Gigabit LAN

ports, Max. 4 of 8 ports could be over

Fiber connectors (refer to Available

Models)

Integrated 2D/3D Graphics

• Onboard ATI ES1000 PCI graphics

controller with 16MB memory

Expansion Slots

• One 64-bit 133MHz PCI-X slot

(3.3V) (M2052-RS)

• One Taro slot supports Tyan M6120

CN-1120 card

Integrated SATA Controller

• 2 SATA ports from ICH5R

• RAID 0, 1 supported

Form Factor

• EEB 3.51 form factor (12” x 13”, 305

x 330mm)

Power Supply

• EPS 12V Power Supply (24-pin, 8-pin

power connectors)

Intrusion detection

• Supports Serial Console Redirect

• Optional SRAM to restore

customized private keys

• Supports Watch Dog Timer

BIOS

• AWARD BIOS® on 4Mbit Flash

ROM

• Supports ACPI 2.0

• Supports boot from USB device

• Power-on mode control for AC

power loss recovery

M6120 Networking Security add-

on card (optional)

• Cavium CN-1120-X Security

Macro Processor add-on card

supports IPsec/SSL

Integrated I/O

• One 40-pin IDE connector

• One 50-pin Compact Flash Type

II connector

• Two SATA connectors

• One pin header for USB ports

(supports two USB 2.0 devices)

• One shrouded header for serial

port

• One shrouded header for parallel

port

• One pin header for PS/2 mouse

and keyboard

• One pin header for VGA port

• One pin header for SMBUS

connection

Available Models

Model GbE over Fiber

GbE over Copper

LAN Bypass

Remarks

S6623T4P4

4 ports 4 ports N/A Standard

S6623P8B N/A 8 ports Yes standard

S6623T2P6

2 ports 6 ports N/A

S6623T4P2

4 ports 2 ports N/A

http://www.tyan.com

7

Chapter 2: Board Installation

Precautions: The Triumph i7520 supports SSI, EPS12V type power supplies

(24pin + 8pin) and will not operate with any other types. For proper power

supply installation procedures see page 37.

DO NOT USE ATX 2.x or ATXGES power supplies as they will damage the

board and void your warranty.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE

DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

http://www.tyan.com

8

2.1- Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

Triumph i7520 (S6623P8B)

http://www.tyan.com

9

Triumph i7520 (S6623T4P4)

http://www.tyan.com

10

2.2 - Block Diagram

Triumph i7520 (S6623P8B) block diagram

http://www.tyan.com

11

Triumph i7520 (S6623T4P4) block diagram

http://www.tyan.com

12

2.3 - Board Parts, Jumpers and Connectors

Triumph i7520 (S6623P8B)

http://www.tyan.com

13

Triumph i7520 (S6623T4P4)

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

©©

OPEN - Jumper OFF, without jumper cover

©©

CLOSED – Jumper ON, with jumper cover

http://www.tyan.com

14

Jumper/Connector

Function

FAN1/2/3/4/5 Fan Connector

VGA1 Pin Header for VGA Port

COM2 Box Header for COM Port

LPT1 Box Header for LPT Port

LPC1 Pin Header for LPC Ports

CF1 Compact Flash Connector

J8 200-pin SO-DIMM Socket

KM1 Pin Header for Keyboard & Mouse

SW1 System RESET Switch

SW2 System Power-ON Switch

FP-USB1 Pin Header for Internal USB Ports

FPIO1 Front Panel Connector

IDE1 IDE Connector

Red LED: shows fan/voltage/temperature fault

status

LED14

Green LED: shows LAN1/LAN2 LAN Bypass status

(for S6623P8B only)

SATA1/SATA2 Serial ATA Connector

JP2 Pin Header for Disk on Module Power Pin

CCMOS1 Clear CMOS Jumper

http://www.tyan.com

15

COM2

LPT1

FP

-

USB1

http://www.tyan.com

16

FP-USB1: Pin Header for Internal USB Ports

10 2

9 1

Signal Pin

Signal

VCC 1 2 VCC

-Data 0

3 4 - Data 1

+ Data 0

5 6 + Data 1

GND 7 8 GND

KEY 9 10

NC

COM2: Box Header for COM Port

10

2

9

1

Use these pin definitions to connect a port to COM2.

Signal

DCD 1 2 DSR

RXD 3 4 RTS

TXD 5 6 CTS

DTR 7 8 RI

GND 9 10

KEY

LPT1: Box Header for LPT Port

1

25

26

2

Signal

STB#

1 2 AFD#

PD0 3 4 ERR#

PD1 5 6 INIT#

PD2 7 8 SLIN#

PD3 9 10

GND

PD4 11

12

GND

PD5 13

14

GND

PD6 15

16

GND

PD7 17

18

GND

ACK#

19

20

GND

BUSY

21

22

GND

PE 23

24

GND

SLCT

25

http://www.tyan.com

17

SW2

FPIO1

FAN1

FAN2

FAN5

FAN4

FAN3

http://www.tyan.com

18

FAN1/FAN2/FAN3/FAN4/FAN5: Fan Connector with Speed Control

+12V

GND

TACH

1

+12V

NC

GND

TACH

1

Use these headers to connect the cooling fans to

the motherboard to monitor their fan speeds to

keep the system stable and reliable.

FPIO1: Front Panel Header

The motherboard provides one front panel header for electrical connection to

the front panel switches and LED’s.

Power_LED+

Power_LED-

PWR_ON+

GND

Warning LED+

Warning LED-

_

GND

INTRU-

2

4

6

8

10

12

14

16

18

1

3

5

7

9

11

13

15

17

HDD_LED+

HDD_LED-

GND

RST_SW+

VCC

Ext. Interrupt

5VSB

SMBUS Data

SMBUS Clock

SW2: System POWER-ON Switch

Pin 1 Pin 2 Pin 3 Pin 4

PWRSW-

GND GND

http://www.tyan.com

19

J8

SW1

VGA1

KM1

http://www.tyan.com

20

VGA1: Pin Header for VGA Port

15

1

16

2

Signal Pin

Signal

Red 1 2 Green

Blue 3 4 NC

GND 5 6 GND

GND 7 8 GND

VCC 9 10

GND

NC 11

12

DDC Data

H. SYNC 13

14

v. SYNC

DDC Clock

15

16

KEY

KM1: Pin Header for Keyboard and Mouse

10 2

9 1

Signal Pin

Signal

VCC 1 2 VCC

KEY 3 4 KEY

KB Data

5 6 Mouse Data

GND 7 8 GND

KB CLK

9 10

Mouse CLK

J8: SO-DIMM Socket

Supports TYAN M6120 CN-1120 card.

SW1: System RESET Switch

Pin 1 Pin 2 Pin 3 Pin 4

RSTSW- RSTSW- GND GND

Page is loading ...

Tyan Triumph i7520 User manual

This manual is also suitable for

Tyan Triumph i7520 User manual

Related papers

Other documents