Liebherr WKes 653 GrandCru Operating instructions

Brand: Liebherr

Model: WKes 653 GrandCru

Category: Wine coolers

Type: Operating instructions

Liebherr WKes 653 GrandCru is a wine storage cabinet that provides optimal conditions for storing your wine collection. With its precise temperature control, adjustable humidity levels, and vibration-free environment, this cabinet ensures that your wines age gracefully and develop their full potential. The activated charcoal filter purifies the air inside the cabinet, removing any impurities that could affect the taste or aroma of your wines. The wooden shelves are designed to cradle your bottles securely, preventing them from moving or vibrating.

7083 141- 00

Operating instructions

Wine storage cabinet

Page 18

Description of the appliance

Adjustable-height feet

Operating and

control elements

Bottle grids

Accessories drawer

(for corkscrews etc.)

Interior light

(LED light strip)

Type plate

Disposal notes

The appliance contains reusable materials and should be disposed of properly - not

simply with unsorted household refuse. Appliances which are no longer needed

must be disposed of in a professional and appropriate way, in accordance with the

current local regulations and laws.

When disposing of the appliance, ensure that the refrigerant circuit is not damaged to

prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil.

• Disable the appliance.

• Pull out the mains plug.

• Cut through the connection cable.

WARNING

Danger of suocation due to packing material and plastic lm!

Do not allow children to play with packaging material. Take the packaging material to an ocial

collection point.

EPREL database

As from 1 March 2021, information about energy labelling and ecodesign requirements will be

available in the European product database (EPREL). You can access the product database

using the following link: https://eprel.ec.europa.eu/. You will be asked to enter the model identi-

er. You will nd the model identier on the type plate.

Climate rating

The climate rating indicates the room temperature at which the appli-

ance may be operated in order to achieve full refrigeration performance.

The climate rating is indicated on the type plate.

The position of the type plate is shown in the section entitled Descrip-

tion of the appliance.

Climate rating Room temperature

SN +10°C to +32°C

N +16°C to +32°C

ST +16°C to +38°C

T +16°C to +43°C

SN-ST +10°C to +38°C

SN-T +10°C to +43°C

Do not operate the appliance outside the specied room temperature range.

Range of appliance use

The appliance is suitable solely for storing wine in a domestic environment or similar. This

includes, for example, use

- in staff kitchenettes, bed and breakfast establishments,

- by guests in cottages, hotels, motels and other forms of accommodation,

- in catering and similar services in the wholesale trade.

Use the appliance solely as is customary within a domestic environment. All other types of

use are inadmissible. The appliance is not suitable for storing and cooling medicines, blood

plasma, laboratory preparations or similar substances and products covered by the 2007/47/

EC Medical Devices Directive. Any misuse of the appliance may result in damage to or spoil-

age of stored goods. Furthermore, the appliance is not suitable for operation in potentially

explosive atmospheres.

Setting up

• Avoid positioning the appliance in direct sunlight or near cookers, radiators and similar sources

of heat.

• The floor on which the appliance stands should be horizontal and level. Compensate for uneven

floors with the adjustable feet.

• Always ensure that there is good ventilation and that the

outward flowing air is able to escape.

• Standard EN 378 specifies that the room in which you

install your appliance must have a volume of 1 m

per 8 g

of R 600a refrigerant used in the appliance, so as to avoid

the formation of inflammable gas/air mixtures in the room

where the appliance is located in the event of a leak in the

refrigerant circuit. The quantity of refrigerant used in your

appliance is indicated on the type plate on the inside of

the appliance.

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type plate. The position of the type

plate is shown in the section entitled Description of the appliance.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appliance and must be easily accessible.

Do not connect the appliance using an extension cable or extension socket.

Do not use stand-alone inverters (conversion of direct current to alternat-

ing/three-phase current) or energy-saving plugs. Risk of damage to the

electronic control system!

Dimensions

 On/O button (switching the appliance on and off)

 Temperature setting buttons

 Interior light On/O button

 Audible warning On/O button

 Fan switch

 Temperature display

Symbols in the display

Alarm (symbol flashes if the temperature inside

the appliance is too high or too low)

The interior fan runs constantly

Child lock is activated

The interior light is switched on constantly

Operating and control elements

The electronic control panel has the new "touch capacitance technology". Any function can

be activated by a ngertip touching the corresponding icon.

Switching the appliance on and o

Switching the appliance on

Press the

button until the temperature display lights up.

Switching the appliance o

Keep the

button pressed for approx. 3 seconds so

that the temperature display goes out.

Fan switch

Thereby a climate which corresponds to that of a wine cel-

lar is achieved inside the appliance. Corks are prevented

from drying out due to an increased level of humidity.

Switching on

Press the

button. The symbol will light up.

Switching o

Press the

button again. The symbol will go out.

Setting the temperature

To reduce the temperature

Press the

button.

To increase the temperature

Press the

button.

- While you are entering the temperature, the set tem-

perature will flash on the display.

- You can change the settings in increments of 1°C briefly

pressing the button again.

- The electronic controls will switch over automatically

about 5 seconds after the last time you pressed the

button, and the actual temperature will be displayed.

The temperature can be set at between +5°C and +20°C.

Audible warning signal

The audible warning signal helps to protect your wines

against excessive temperatures.

It sounds when the door has been left open for longer

than 60 seconds.

It sounds when the interior gets too warm or too cold.

The temperature display will also ash. The

symbol

lights up.

The audible warning device is switched o by pressing

the

button.

The temperature display will continue to ash until the

cause of the alarm has been rectied.

Interior light

The interior light is tted on the inside at the top.

The interior light can be switched on and o using the

Light button.

The

symbol lights up when the light is switched on.

Caution - class 1M laser radiation. When cover is

removed, do not look directly at light through opti-

cal instruments.

The lighting may only be replaced by the customer

service technician or by competent skilled person-

nel!

Furthermore, the brightness of the lighting can be ad-

justed.

Press and hold the

button and at the same time press

the temperature setting buttons to increase or decrease

the brightness.

= darker , = brighter

Setup mode

The following functions can be activated in setup mode:

= child lock, = display brightness

= Child lock

The child lock is designed to protect the appliance from being switched off accidentally.

Activating the child lock

• Activate setup mode by pressing the

button for 5 seconds.

- The display reads

• Press the

button.

- The display reads

• Press the

button again.

- The

symbol will light up to indicate that the child lock is activated.

• Exit setup mode by pressing the

button.

Deactivating the child lock

• Activate setup mode by pressing the

button for 5 seconds.

- The display reads

• Press the

button.

- The display reads

• Press the

button again.

- The

symbol will go out, indicating that the child lock is deactivated.

• Exit setup mode by pressing the

button.

= Display brightness

Adjusting the display brightness

• Activate setup mode by pressing the

button for 5 seconds.

• Press the

button until appears in the display.

Press the

button.

- The display reads

• Press the

buttons and set the brightness between

0 = minimum and

5 = maximum.

• When you reach the desired level, press the

button.

• Exit setup mode by pressing the

button.

• Close the door. The new setting will be activated after about 1 minute.

Equipment

Wooden shelves

The shelves are designed for the horizontal storage of wine

bottles. This prevents the corks from drying out.

Accessories drawer

Accessories such as corkscrews etc. can be kept in the

bottom drawer.

The shelves and drawer can be removed by simply pull-

ing them towards you. To do this, the door must be open

at least 90°.

Air exchange with activated charcoal lter

The way in which wines continue to mature depends on the ambient conditions. The quality of

the air is therefore decisive for preserving the wine.

To guarantee optimum air throughput, the appliance is tted

with an activated charcoal lter at the top of the rear wall.

We recommend that you replace the illustrated lter once a

year. Filters can be obtained from your dealer.

Changing the lter:

The lter can be removed by depressing the recesses on the

left and right with a small screwdriver.

Storing wine

Four bottles can be stored side by side on a

wooden shelf.

Tall wine bottles can also be stored crossways on the

wooden shelves.

To ensure stable storage of the bottles, click the retaining

plates provided onto the middle slat of the wooden shelf.

Defrosting

The appliance defrosts automatically.

Cleaning

Before cleaning, always switch o the appliance. Disconnect from the mains or re-

move/unscrew the fuse.

• Clean the side panels and door surfaces with a clean and soft cloth. If necessary, use a moist

cloth (water + detergent). Alternatively, use a micro-fibre cloth.

• Clean the inside of the appliance, except the wooden grid shelves, with lukewarm water and

a little detergent. Do not use abrasive or acid cleaners or chemical solvents.

Do not use steam cleaners because of the

risk of injury and damage.

• Ensure that no cleaning water penetrates into the elec trical components or ventilation grille.

• Do not damage or remove the type plate on the inside of the appliance. It is very important for

servicing purposes.

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch it o and disconnect the

plug or switch o or unscrew the fuse. Clean the appliance and leave the door open in order

to prevent unpleasant smells.

The appliance complies with the relevant safety regulations and EU Directives 2014/30/EU

and 2014/35/EU.

Malfunctions

• F1 appears in the display.

– The appliance has suffered a fault. Contact the customer service department.

You may be able to rectify the following faults by checking the possible causes yourself.

• Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

• Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects to vibrate? Please note that

noises caused by the refrigerant circuit cannot be avoided.

• The temperature is not low enough:

– Is the temperature setting correct (see "Setting the temperature")?

– Does the separately installed thermometer show the correct reading?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes apply and you cannot rectify the

fault yourself, contact the nearest customer service depart-

ment stating the type designation

, service number

and

appliance number

as indicated on the type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Safety instructions and warnings

• To prevent injury or damage to the unit, the appliance should be unpacked and set up by two

people.

• In the event that the appliance is damaged on delivery, contact the supplier immediately before

connecting to the mains.

• To guarantee safe operation, ensure that the appliance is set up and connected as described

in these operating instructions.

• Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or

remove the fuse.

• When disconnecting the appliance, pull on the plug, not on the cable.

• Any repairs and work on the appliance should only be carried out by the customer service

department, as unauthorised work could prove highly dangerous for the user. The same ap-

plies to changing the mains power cable.

• Do not allow naked flames or ignition sources to enter the appliance. When transporting and

cleaning the appliance, ensure that the refrigerant circuit is not damaged. In the event of dam-

age, make sure that there are no ignition sources nearby and keep the room well ventilated.

• Do not stand on the plinth, drawers or doors or use them to support anything else.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities or lack of experience and knowledge unless they have been given

initial supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

• Avoid prolonged skin contact with cold surfaces or chilled/frozen food. This could cause pain,

numbness and frostbite. In the case of prolonged skin contact, protective measures should

be taken, e.g. gloves should be worn.

• Do not consume food which has been stored for too long, as it could cause food poisoning.

• Do not store explosives or sprays using combustible propellants such as butane, propane,

pentane etc. in the appliance. Electrical components might cause leaking gas to ignite. You

may identify such sprays by the printed contents or a flame symbol.

• Do not use electrical appliances inside the appliance.

• If you have a lockable appliance, do not keep the key near the appliance or within reach of

children.

• The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors

or in areas where it is exposed to splash water or damp conditions.

• The LED light strip illuminates the interior of the appliance. It is not suitable for lighting a room.

• When transporting or operating the appliance at an altitude of more than 1500 m above sea

level, the glass pane in the door can break due to the reduction in air pressure. Broken frag-

ments are sharp-edged and can cause serious injury.

Wall mounting

The appliance can be wall-mounted. There are two

mounting holes

1 at the back of the appliance

Make sure the wall and fastenings can withstand the

weight of the appliance when fully loaded. The empty

appliance weighs 31 kg.

Important!

To ensure sucient ventilation through the ventilation

slots, the four wall spacers

2 must always be inserted,

regardless of whether the appliance is wall-mounted

or standing on the oor against a wall.

Simply insert the spacers in the openings provided.

340 mm

Liebherr Hausgeräte Lienz GmbH * Dr.-Hans-Liebherr-Strasse 1 * A-9900 Lienz ** www.liebherr.com

Liebherr WKes 653 GrandCru Operating instructions

Brand: Liebherr

Model: WKes 653 GrandCru

Category: Wine coolers

Type: Operating instructions

Download PDF

report

Liebherr WKes 653 GrandCru Operating instructions

Liebherr WKes 653 GrandCru Operating instructions

Related papers

Other documents