Quick Installation Guide
AWAP411
150M Wireless 11N Access Point
7109504165
REV:1.0.0
1
1) First, connect the power adapter of the AP to a wall outlet or power strip. The
POWER LED will light to indicate proper operation.
2) Secondly, connect the LAN port of the AP to a switch/router/modem by an
Ethernet cable. The LAN LED will light to indicate a proper Ethernet connection.
Tips: The LAN Port on the AP is Auto MDI/MDIX, so you can use a straight-
through or crossover cable to the LAN Port.
3) Now with default settings, your wireless adapter will connect to the AP
automatically.
Receptor for
Powe
r
Adapte
r
LAN Port
2
Default Settings: http://192.168.1.254
For more information about the settings, please refer to User Guide in the resource
CD. Alfa recommends that you finish the configuration on a PC connected to the AP
by a cable.
User Name: admin
Password: admin
SSID: AWAP411
Channel: 6
O
p
erational Mode: Access Point
3
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a
registered trademark of Alfa Network, Inc. Other brands and product names are
trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from Alfa Network, Inc. Copyright © 2011 Alfa Network, Inc. All
rights reserved.
http://www.alfa.com.tw
/
