Philips 170S4FS User manual

Philips 170S4FG/170S4FB/170S4FS Electronic User's Manual

file:///D|/L/german/170s4fgbs/index.htm [4/28/2003 2:47:02 PM]

Page is loading ...

Kippen

ZURÜCK ZUM SEITENANFANG

170S4FG/170S4FB/170S4FS Produktinformationen

file:///D|/L/german/170s4fgbs/product/product.htm (6 of 6) [4/28/2003 2:47:09 PM]

Page is loading ...

HAUPTSTEUERUNGEN SCHLIESSEN

Bildschirmanzeige (OSD)

file:///D|/L/german/170s4fgbs/osd/osddesc.htm (2 of 2) [4/28/2003 2:47:14 PM]

Page is loading ...

Herunterladen und Ausdrucken

file:///D|/L/german/download/download.htm (3 of 3) [4/28/2003 2:47:19 PM]

Page is loading ...

Regulatory Information
TCO'95/99 Information • TCO'95/99 Environmental Requirements • TCO'03 Information •
Recycling Information for Customers • CE Declaration of Conformity • Energy Star
Declaration • Federal Communications Commission (FCC) Notice (U.S. Only) • Commission
Federale de la Communication (FCC Declaration) • EN 55022 Compliance (Czech Republic
Only) • VCCI Class 2 Notice (Japan Only) • MIC Notice (South Korea Only) • Polish Center
for Testing and Certification Notice • North Europe (Nordic Countries) Information • BSMI
Notice (Taiwan Only) • Ergonomie Hinweis (nur Deutschland) • Philips End-of-Life Disposal •
Information for UK only
Safety and Troubleshooting • Troubleshooting • Other Related Information • Frequently
Asked Questions (FAQs)
TCO'95/99 Information
Congratulations!
You have just purchased a TCO'95 or TCO'99 approved and labelled product! Your choice has provided you
with a product developed for professional use. Your purchase has also contributed to reducing the burden
on the environment and also, to the further development of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labeling has become an established method for encouraging the
adaptation of goods and services to the environment. The main problem, as far as computers and other
Regulatory Information
file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (1 of 14) [4/28/2003 2:47:29 PM]

electronics equipment are concerned, is that environmentally harmful substances are used both in the

products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of

electronics equipment, most of these potentially damaging substances sooner or later enter nature.

There are also other characteristics of a computer, such as energy consumption levels, that are important

from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of

electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing

emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running

continuously and thereby consumes a lot of energy.

What does labelling involve?

This product meets the requirements for the TCO'95/TCO'99 scheme which provides for international and

environmental labeling of personal computers. The labeling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The

Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy

Administration).

Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of

electric and magnetic fields, energy consumption and electrical and fire safety.

The environmental demands impose restrictions on the presence and use of heavy metals, brominated and

chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must

be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be

adhered to in each country where the company implements its operational policy.

The energy requirements include a demand that the computer and/or display, after a certain period of

inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to

reactivate the computer shall be reasonable for the user.

Labeled products must meet strict environmental demands, for example, in respect of the reduction of

electric and magnetic fields, physical and visual ergonomics and good usability.

Below you will find a brief summary of the environmental requirements met by this product. The complete

environmental criteria document may be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): [email protected]

Current information regarding TCO'95/TCO'99 approved and labeled products may also be obtained via

the Internet, using the address: http://www.tco-info.com/

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (2 of 14) [4/28/2003 2:47:29 PM]

RETURN TO TOP OF THE PAGE

Environmental Requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is

to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of

flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants

are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing

bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including

reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame

retardants have been found in human blood and researchers fear that disturbances in fetus development

may occur.

The relevant TCO'95/TCO'99 demand requires that plastic components weighing more than 25 grams must

not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the

printed circuit boards since no substitutes are available.

Cadmium**

Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer

displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO' 95/TCO'99

requirement states that batteries, the color-generating layers of display screens and the electrical or

electronics components must not contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in

high doses. The relevant TCO'95/TCO'99 requirement states that batteries may not contain any mercury. It

also demands that mercury is not present in any of the electrical or electronics components associated with

the labeled unit.

CFCs (freons)

The relevant TCO'95/TCO'99 requirement states that neither CFCs nor HCFCs may be used during the

manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit

boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing

increased reception on earth of ultraviolet light with increased risks e.g. skin cancer (malignant melanoma)

as a consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous

system and in higher doses, causes lead poisoning. The relevant TCO'95/TCO'99 requirement permits the

inclusion of lead since no replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within living organisms.

** Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (3 of 14) [4/28/2003 2:47:29 PM]

RETURN TO TOP OF THE PAGE

TCO'03 Information

(Option, only available for TCO'03 version)

Congratulations!

The display you have just purchased carries the TCO'03 Displays label. This

means that your display is designed, manufactured and tested according to

some of the strictest quality and environmental requirements in the world. This

makes for a high performance product, designed with the user in focus that also

minimizes the impact on our natural environment.

Some of the features of the TCO'03 Display requirements.

Ergonomics

Good visual ergonomics and image quality in order to improve the working environment for the user

and to reduce sight and strain problems. Important parameters are luminance, contrast, resoluction,

reflectance, colour rendition and image stability.

●

Energy

Energy-saving mode after a certain time-beneficial both for the user and the environment

●

Electrical safety●

Emissions

Electromagnetic fields

●

Noise emissions●

Ecology

The product must be prepared for recycling and the manufacturer must have a certified environmental

management system such as EMAS or ISO 14 000

●

Restrictions on

chlorinated and brominated flame retardants and polymers❍

heavy metals such as cadmium, mercury and lead.❍

●

The requirements included in this label have been developed by TCO Development in co-operation with

scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (4 of 14) [4/28/2003 2:47:29 PM]

been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling

system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

RETURN TO TOP OF THE PAGE

Recycling Information for Customers

Philips establishes technically and economically viable objectives to optimize the environmental performance

of the organization's product, service and activities.

From the planning, design and production stages, Philips emphasizes the important of making products that

can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back

initiatives and recycling programs whenever possible, preferably in cooperation with competitors.

There is currently a system of recycling up and running in the European countries, such as The Netherlands,

Belgium, Norway, Sweden and Denmark.

In U.S.A., Philips Consumer Electronics North America has contributed funds for the Electronic Industries

Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products

from household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state non-profit

organization focused on promoting recycling market development - plans to implement a recycling program.

In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to

follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw

For help and service, please contact Consumers Information Center or F1rst Choice Contact Information

Center in each country or the following team of Environmental specialist can help.

Mr. Job Chiu - Environment manager

Philips Electronics Industries (Taiwan) Ltd, Monitor Business Unit

E-mail: [email protected]

Tel: +886 (0) 3 454 9839

Mr. Maarten ten Houten - Senior Environmental Consultant

Philips Consumer Electronics

E-mail: [email protected]

Tel: +31 (0) 40 27 33402

Ms. Patricia A. Franco

Philips Electronics North America

E-mail: [email protected]

Tel: +1 202 962 8550

RETURN TO TOP OF THE PAGE

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (5 of 14) [4/28/2003 2:47:29 PM]

CE Declaration of Conformity

Philips Consumer Electronics declare under our responsibility that the product is in conformity with the

following standards

- EN60950:1992+A1+A2+A3+A4+A11 (Safety requirement of Information Technology Equipment)

- EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)

- EN55024:1998 (Immunity requirement of Information Technology Equipment)

- EN61000-3-2:1995 (Limits for Harmonic Current Emission)

- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker)

following provisions of directives applicable

- 73/23/EEC (Low Voltage Directive)

- 89/336/EEC (EMC Directive)

- 93/68/EEC (Amendment of EMC and Low Voltage Directive)

and is produced by a manufacturing organization on ISO9000 level.

The product also comply with the following standards

- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for Visual Display)

- ISO13406-2 (Ergonomic requirement for Flat panels)

- GS EK1-2000 (GS specification)

- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)

- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)

- TCO'95, TCO'99, TCO'03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and

Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions

RETURN TO TOP OF THE PAGE

Energy Star Declaration

PHILIPS

170S4FG/170S4FB/170S4FS

This monitor is equipped with a function for saving energy which supports the VESA Display Power

Management Signaling (DPMS) standard. This means that the monitor must be connected to a

computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94.

Time settings are adjusted from the system unit by software.

NUTEK VESA State LED Indicator Power Consumption

Normal operation ON Green < 40 W (typ.)

Power Saving

Alternative 2

One step

OFF Amber < 1 W

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (6 of 14) [4/28/2003 2:47:29 PM]

As an ENERGY STAR

®

Partner, PHILIPS has determined that this product meets

the

ENERGY STAR

®

guidelines for energy efficiency.

We recommend you switch off the monitor when it is not in use for quite a long time.

RETURN TO TOP OF THE PAGE

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.●

Increase the separation between the equipment and receiver.●

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●

Consult the dealer or an experienced radio/TV technician for help.●

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer

device.

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or

excessive moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN

INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

RETURN TO TOP OF THE PAGE

Commission Federale de la Communication (FCC Declaration)

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (7 of 14) [4/28/2003 2:47:29 PM]

Page is loading ...

Information technology equipment. If this equipment is used near a radio or television receiver in a domestic

environment, it may cause radio Interference. Install and use the equipment according to the instruction

manual.

Class B ITE

RETURN TO TOP OF THE PAGE

MIC Notice (South Korea Only)

Class B Device

Please note that this device has been approved for non-business purposes and may be used in any

environment, including residential areas.

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (9 of 14) [4/28/2003 2:47:29 PM]

RETURN TO TOP OF THE PAGE

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket).

All equipment that works together (computer, monitor, printer, and so on) should have the same power

supply source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection

device in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply

socket, which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of

standards PN-93/T-42107 and PN-89/E-06251.

RETURN TO TOP OF THE PAGE

North Europe (Nordic Countries) Information

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (10 of 14) [4/28/2003 2:47:29 PM]

Placering/Ventilation

VARNING:

FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR

DU STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL:

SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER

NEMT TILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS:

SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI

IRROTTAA PISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL:

NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR

STØMTILFØRSEL ER LETTE Å NÅ.

RETURN TO TOP OF THE PAGE

BSMI Notice (Taiwan Only)

RETURN TO TOP OF THE PAGE

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (11 of 14) [4/28/2003 2:47:29 PM]

Ergonomie Hinweis (nur Deutschland)

Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß

Reparaturen nur durch Fachpersonal durchgeführt werden.1.

nur original-Ersatzteile verwendet werden.2.

bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird.3.

Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem

Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem

Zeichenkontrast wären die Folge).

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger.

ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß

NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.

RETURN TO TOP OF THE PAGE

End-of-Life Disposal

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle

your product to increase the amount of reusable materials and to minimize the amount to be disposed of.

Please find out about the local regulations on how to dispose of your old monitor from your local Philips

dealer.

RETURN TO TOP OF THE PAGE

Information for UK only

WARNING - THIS APPLIANCE MUST BE

EARTHED.

Important:

This apparatus is supplied with an approved

moulded 13A plug. To change a fuse in this type

of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362

5A,A.S.T.A. or BSI approved type.

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (12 of 14) [4/28/2003 2:47:29 PM]

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket

outlets, it should be cut off and an appropriate

3-pin plug fitted in its place.

If the mains plug contains a fuse, this should

have a value of 5A. If a plug without a fuse is

used, the fuse at the distribution board should

not be greater than 5A.

Note: The severed plug must be destroyed to

avoid a possible shock hazard should it be

inserted into a 13A socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in

accordance with the following code:

BLUE - "NEUTRAL" ("N")

BROWN - "LIVE" ("L")

GREEN & YELLOW - "EARTH" ("E")

1. The GREEN AND YELLOW wire must be

connected to the terminal in the plug which is

marked with the letter "E" or by the Earth symbol

or coloured GREEN or GREEN AND

YELLOW.

2. The BLUE wire must be connected to the

terminal which is marked with the letter "N" or

coloured BLACK.

3. The BROWN wire must be connected to the

terminal which marked with the letter "L" or

coloured RED.

Before replacing the plug cover, make certain

that the cord grip is clamped over the sheath of

the lead - not simply over the three wires.

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (13 of 14) [4/28/2003 2:47:29 PM]

RETURN TO TOP OF THE PAGE

Regulatory Information

file:///D|/L/german/170s4fgbs/SAFETY/regs/regulat.htm (14 of 14) [4/28/2003 2:47:29 PM]

Page is loading ...

ZURÜCK AN DEN SEITENANFANG

Anschluß an ihren PC

file:///D|/L/german/170s4fgbs/install/connect.htm (4 of 4) [4/28/2003 2:47:44 PM]

Page is loading ...

Anmerkung: Dieser Monitor ist für

eine 100mmx100mm

VESA-kompatible Befestigung

geeignet.

ZURÜCK ZUM SEITENANFANG

Entfernen des Standfußes

file:///D|/L/german/170s4fgbs/install/base.htm (4 of 4) [4/28/2003 2:47:45 PM]

Page is loading ...

Sonntags zwischen 10 Uhr und 18 Uhr (CET) durch das Verwenden eine der gebührenfreien Nummern.

Klicken hier zum Zugreifen der Kontaktinformationen F1rst Choice.

Oder Sie können uns über erreichen: http://www.philips.com

United States Guarantee

file:///D|/L/german/WARRANTY/War_usa.htm (4 of 4) [4/28/2003 2:47:52 PM]

Page is loading ...

Philips 170S4FS User manual

This manual is also suitable for

Philips 170S4FS User manual

in other languages

Related papers

Other documents