Proscend M366 Installation guide

Brand
Proscend
Model
M366
Type
Installation guide

Proscend M366 is an advanced outdoor dual-SIM LTE cellular router that provides reliable and fast internet connectivity in various outdoor scenarios. With its rugged design, it can withstand harsh weather conditions, making it suitable for remote locations or areas with limited wired internet access.

The M366 features dual-SIM card slots, allowing you to switch between different cellular networks for optimal coverage and redundancy. It supports 4G LTE connectivity, delivering high-speed internet access for data-intensive applications like streaming, video conferencing, and file sharing.

The router comes with a built-in PoE (Power over Ethernet) injector, eliminating the need for a separate power supply. This feature simplifies installation and provides flexibility in positioning the router where it receives the strongest cellular signal.

Proscend M366 is an advanced outdoor dual-SIM LTE cellular router that provides reliable and fast internet connectivity in various outdoor scenarios. With its rugged design, it can withstand harsh weather conditions, making it suitable for remote locations or areas with limited wired internet access.

The M366 features dual-SIM card slots, allowing you to switch between different cellular networks for optimal coverage and redundancy. It supports 4G LTE connectivity, delivering high-speed internet access for data-intensive applications like streaming, video conferencing, and file sharing.

The router comes with a built-in PoE (Power over Ethernet) injector, eliminating the need for a separate power supply. This feature simplifies installation and provides flexibility in positioning the router where it receives the strongest cellular signal.

- 1 -
Proscend Communications Inc. All rights reserved.
www.proscend.com
Outdoor Dual SIM LTE Cellular Router
Quick Installation Guide Version: 1.10
Physical Appearance
STEP 3: Split the rubber plug components. Fix 1 and 2 with the bottom cover.
Dimension (W x H x D): 170 x 225 x 89 mm
Front View Side View Rear View Internal View
STEP 4: Put the Ethernet cable through the hole of the bottom cover and make
Hardware Interfaces a new RJ45 connector.
NOTE: Ethernet cable is not included in the package.
STEP 5: Insect the RJ45 connector into the Ethernet port.
Hardware Installation Procedures
STEP 1: Unscrew 2 screws and remove the bottom cover. STEP 6: Put the bottom cover back and screw them tightly. Lock the rubber
plug.
STEP 2: Insert a Micro SIM into SIM holder slot 1 and the second SIM into
Slot 2 . Beware of the micro SIM orientation.
STEP 7: Put the device on a pole in the right height and direction. Fix the
router with the pole mounting kit.
#
Item
Description
1
Micro SIM Card slot 1. It’s the default.
2
Micro SIM Card slot 2
3
ETHERNET
10/100/1000Mbps Ethernet Port with PoE
4
RESET
Reboot: Press less than 5 seconds
Restore to factory default: Press for at least 5 seconds
1
2
1
3
4
3
4
- 2 -
Proscend Communications Inc. All rights reserved.
www.proscend.com
NOTE
STEP 8: Connect the Ethernet cable into the PoE Injector. Web Access
After default reset, the IP address of the device is 192.168.1.1
Username: admin
Password: 2wsx#EDC
˙ Please scan below QR Code to download online resources.
Download Link: https://www.proscend.com/en/product/M366.html
STEP 9: Power on the PoE Injector.
STEP 10: Connect a PC to the PoE Injector for configuration.
LED Indicators
M366
LED
ON
OFF
Blinking
System:
GREEN
System Ready
X
System in Booting
LAN:
GREEN
X
X
Ethernet Data Transmitting
Internet:
GREEN
Internet is connected
Internet is not connected
X
SIM:
GREEN
SIM is detected
No SIM
Slow: SIM Detecting
Fast: SIM Error
Signal:
RED,
ORANGE,
GREEN
Signal Strength:
Low(RED) / Medium (ORANGE) / Good (GREEN)
OFF:
LTE is not connected.
Ethernet Connector
The Ethernet connector follows EIA-568B wiring pattern.
Pinouts for 10/100Mbps and 1000Mbps data.
Pin
Color
10/100Mbps Data
1000Mbps Data
1
White/Orange
Tx +
Tx Rx A +
2
Orange
Tx -
Tx Rx A -
3
White/Green
Rx +
Tx Rx B +
4
Blue
X
Tx Rx B -
5
White/Blue
X
Tx Rx C +
6
Green
Rx -
Tx Rx C -
7
White/Brown
X
Tx Rx D +
8
Brown
X
Tx Rx D -
Pinouts for 10/100Mbps and 1000Mbps PoE.
Pin
Color
10/100Mbps Power
1000Mbps Power
1
White/Orange
V +
V +
2
Orange
V +
V +
3
White/Green
V -
V -
4
Blue
X
X
5
White/Blue
X
X
6
Green
V -
V -
7
White/Brown
X
X
8
Brown
X
X
P/N:604040000078
  • Page 1 1
  • Page 2 2

Proscend M366 Installation guide

Brand
Proscend
Model
M366
Type
Installation guide

Proscend M366 is an advanced outdoor dual-SIM LTE cellular router that provides reliable and fast internet connectivity in various outdoor scenarios. With its rugged design, it can withstand harsh weather conditions, making it suitable for remote locations or areas with limited wired internet access.

The M366 features dual-SIM card slots, allowing you to switch between different cellular networks for optimal coverage and redundancy. It supports 4G LTE connectivity, delivering high-speed internet access for data-intensive applications like streaming, video conferencing, and file sharing.

The router comes with a built-in PoE (Power over Ethernet) injector, eliminating the need for a separate power supply. This feature simplifies installation and provides flexibility in positioning the router where it receives the strongest cellular signal.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents