HEB LIGHTING E1-D User manual

Brand
HEB LIGHTING
Model
E1-D
Type
User manual
User Manual Ver 1.0.2
Model No.: E1-D
Door sensor/DC12-24V/4A output/Aluminum profile installation
Features
Door Sensor Switch
● Door sensor switch, connected directly to the low voltage LED strip.
● When the door open, or no obstacle ahead, the strip turn on gradually.
When the door close, or obstacle ahead, the strip turn off gradually.
● Max 4A output current, max output power 96W@24V.
● Generally installed in the aluminum lamp strip housing.
● 3M paste in the bottom of the PCBA make easy installation and security.
● Low cost and high stability.
● Widely used in wardrobe lights.
LVD
Technical Parameters
Input and Output Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Certification CE,EMC,LVD
EN60950
Safety standard(LVD)
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
Output power Max. 48W@12V
Max. 96W@24V
Output voltage 12-24VDC
Input voltage 12-24VDC Wiring Diagram
+
-
Power Supply
12-24VDC
Constant Voltage
AC100-240V
Single color LED strip
Dimension
Installation attention
● side of aluminum profileCut a hole in size L7 x H5mm on the .
● Put mini sensor switch into profiles when power is off,
put the detetor head to the hole,
detector head should face to the objects.
● Pay attention to power input and LED output polarity.
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Sensor data
15-30
⩽10cm
Detective distance
Detevtive angle
50.0 mm
11.0 mm
7.5 mm
E1-D Door Sensor Switch
(A)6.4±0.3
(B)4.9±0.2
DC input DC output
Aluminum profile
Sensor switch
LED strip
PC cover
L7 x H5mm hole
  • Page 1 1

HEB LIGHTING E1-D User manual

Brand
HEB LIGHTING
Model
E1-D
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents