Luxpro LP369 User manual

Luxpro
Brand
Luxpro
Model
LP369
Type
User manual
750 Lumen LED Lantern Rugged rubber design
BROADBEAM surface LED technology
Rubberized metal handle
Protective rubberized armor, rugged rubber ends
Variable on/off brightness dial
O-ring sealed, weather-resistant
LP369
Operation Instructions
Usage and Maintenance
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
On/Off: Turn variable dial clockwise. Audible click when
turned on, or off.
Adjusting brightness: Rotate variable dial clockwise to
increase brightness, and counter-clockwise to decrease
brightness.
Battery indicator Lights: Located below the variable
power dial. Green LED’s indicate battery level: 4 = full
power, 3 = 75%, 2 = 50%, 1 = 25%. Replace batteries
at this point to avoid complete loss of useability.
Low
High
ANSI/PLATO FL1 STANDARD
lm
750 lm
LUMENSMODES
h
4h
RUN TIME
m
21 m
BEAM
DISTANCE
Battery Replacement: In a dry environment, unscrew the
base by turning counter-clockwise. Remove batteries.
Insert the new batteries into the slots following the +/-
symbols. Carefully reinstall the base by pressing lightly
while turning clockwise.
3C
Batteries
Product Warranty
Limited 90-Day Warranty against manufacturer’s defects
from time of purchase. For warranty claims contact
LuxPro by calling 801-553-8886 or sending an email to
[email protected].
30 90 5
  • Page 1 1

Luxpro LP369 User manual

Luxpro
Brand
Luxpro
Model
LP369
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents