750 Lumen LED Lantern Rugged rubber design
BROADBEAM surface LED technology
Rubberized metal handle
Protective rubberized armor, rugged rubber ends
Variable on/off brightness dial
O-ring sealed, weather-resistant
LP369
Operation Instructions
Usage and Maintenance
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
On/Off: Turn variable dial clockwise. Audible click when
turned on, or off.
Adjusting brightness: Rotate variable dial clockwise to
increase brightness, and counter-clockwise to decrease
brightness.
Battery indicator Lights: Located below the variable
power dial. Green LED’s indicate battery level: 4 = full
power, 3 = 75%, 2 = 50%, 1 = 25%. Replace batteries
at this point to avoid complete loss of useability.
Low
High
ANSI/PLATO FL1 STANDARD
lm
750 lm
LUMENSMODES
h
4h
RUN TIME
m
21 m
BEAM
DISTANCE
Battery Replacement: In a dry environment, unscrew the
base by turning counter-clockwise. Remove batteries.
Insert the new batteries into the slots following the +/-
symbols. Carefully reinstall the base by pressing lightly
while turning clockwise.
3C
Batteries
Product Warranty
Limited 90-Day Warranty against manufacturer’s defects
from time of purchase. For warranty claims contact
LuxPro by calling 801-553-8886 or sending an email to
30 90 5
/
