Jabra Engage 75 User manual

Jabra Engage 75 Convertible

How do I pair my Jabra Engage 75 with my mobile device?

You can pair and connect with two mobile devices.

Pair using Bluetooth

1. Plug the base into a power supply using the AC adapter supplied.

2. Tap to open the Settings menu, and tap to navigate down to

Mobile device.

3. Tap to select New.

4. Follow the onscreen pairing instructions to pair your mobile device

with the headset.

Pair using NFC

10/10/2022 15:14

https://www.jabra.com.au/supportpages/jabra-engage-75/9555-583-117/faq/ec5e4379-

7bfc-4ff5-9414-3742060f5f2c

Page 1 of 2

1. Plug the base into a power supply using the AC adapter supplied.

2. Ensure NFC is enabled on your mobile device. Hold the mobile device

against the NFC logo on the base and follow the instructions on your

mobile device to complete the pairing.

Note that the location of the NFC zone on the mobile device may vary.

Refer to the user manual for the mobile device for more information.

Note: After pairing, the headset will automatically try to connect to your

mobile device when it is turned on and within range of the base, and

Bluetooth is enabled.

Pairing with a third mobile device will replace the pairing of one of the

previously paired mobile devices, if it is not currently connected to the

base.

10/10/2022 15:14

https://www.jabra.com.au/supportpages/jabra-engage-75/9555-583-117/faq/ec5e4379-

7bfc-4ff5-9414-3742060f5f2c

Page 2 of 2