2. Hoover
  3. FH50704

Hoover FH50704 User guide

  • Hello! I've reviewed the user guide for the Hoover POWERDASH PET carpet washer. This document provides clear instructions on how to set up, use, and maintain your new carpet washer, including how to fill the water tank, add solution, and operate the cleaning and drying functions. I'm ready to help answer any questions you have about the device based on the information provided in this guide.
  • How do I fill the Clean Water Tank?
    How do I add the cleaning solution?
    How do I turn on the unit?
    How do I apply solution?
    How do I dry the carpet?
QUICK START GUIDE
5
HOW TO USE
Slide the Clean Water Tank
back into the unit.
Add Hoover® cleaning solution
to the Solution Fill Line then
replace and tighten the cap.
Remove Clean Water Tank, twist
off water cap on bottom and add
warm water to the fill line.
3
21
Water
Fill lines
Solution
Step on the ON/OFF Pedal to turn ON.
On /Off
Plug power cord into electrical outlet. Step on the
Handle Release Pedal to recline the unit into the
cleaning position.
Recline
4
HOW TO USE (CONT’D)
FOR BEST EXPERIENCE:
Vacuum carpet thoroughly with a Hoover vacuum before use. Don’t use the carpet cleaner
as a traditional vacuum cleaner.
PRO TIP
SQUEEZE TRIGGER
TO WASH RELEASE TRIGGER
TO DRY
6
Slowly push forward then backwards while
squeezing the trigger to apply water and
cleaning solution.
7
Release trigger then slowly push forward then
backwards to remove water and dry the carpet.
3
21
Flip the brushroll window
forward to remove any debris
from the brushroll.
Remove the Nozzle Cover and
rinse.
Remove the tank lid to empty
and rinse tank.
EASY CLEANUP AND MAINTENANCE: AFTER EACH USE
ALLOW PARTS TO AIR DRY BEFORE STORING.
961003525-R0
/