2. Computers & electronics
  3. Audio & home theatre
  4. Headphones
  5. Shure
  6. Aonic 50
Aonic 50

Shure Aonic 50 User guide

  • Hello! I've reviewed the user guide for the Shure AONIC 50, GEN 2 headphones. This document covers how to power the headphones, pair them with your devices, control volume and music, manage calls, and use noise cancelling features. It also has information about using cables. I'm ready to help you with any questions you have about these headphones.
  • How do I power on the headphones?
    How do I enter pairing mode?
    How do I control the volume?
    How do I activate Active Noise Cancellation?
AONIC 50, GEN 2
WIRELESS NOISE
CANCELLING
HEADPHONES
QUICK
S T A R T
GUIDE
2
Printed in China
©2023 Shure Incorporated
Regulatory Model: MH36458
27A53896 (Rev. 1)
3
1POWER ON
Hold 2s
Flashing blue/red – PAIRING MODE
2
Select Shure AONIC 50
on your device
POWER ON &
PAIR
Headphones automatically enter pairing
mode the first time you power them on or if
not previously paired with a device
i
4
BATTERY STATUS
Press two times (audible notification)
PAIRING MODE
Hold 5s from a powered-off state
POWER ON/OFF
Hold for 2s
HOLD 5s
HOLD 2s
2X
CLEAR PAIRED DEVICE LIST
Hold 7s from a powered-off state and
plugged into a charger
HOLD 7s
?
X
USING THE
POWER BUTTON
5
CONTROLLING THE
VOLUME
VOLUME DOWN
VOLUME UP
-
+
6
CONTROLLING THE
MUSIC + PHONE
CENTER BUTTON
ANSWER
Press one time
1X
DECLINE
Press and hold 2s
HOLD 2s
END
Press one time
1X
VOICE ASSISTANT
Press and hold 2s
HOLD 2s
PLAY/PAUSE
Press one time
1X
NEXT TRACK
Press two times
2X
PREVIOUS TRACK
Press three times
3X
RESTART TRACK
Press three times after
at least 6s of music
3X
6S
+
HOLD /
ANSWER 2ND CALL
Press three times
3X
MUTE/UNMUTE MIC
Press two times
2X
7
NOISE
CONTROL
NOISE CONTROL BUTTON
ENVIRONMENT MODE (EM)
Push up
ACTIVE NOISE CANCELLATION (ANC)
Push down
NO EM OR ANC
Center
You can customize the button controls in the
ShurePlus™ PLAY app available for IOS and Android
8
3.5 MM AUDIO CABLE
Use to connect to analog audio port
USBC CABLE
Use to charge the battery &
connect to digital audio
USING THE
CABLES
9
PAIRING UNSUCCESSFUL
Flashing blue
PAIRING SUCCESSFUL
Blue for 2s
PAIRING MODE
Flashing blue/red
CHARGING
Red
LOW BATTERY
Flashing red
FULLY CHARGED
Off
ON A CALL
Red
LED BEHAVIORS
LED
2s
10
STORING THE
HEADPHONES
123
11
SPECIFICATIONS
Transducer Type
Dynamic, Neodymium magnet
Driver Size
50mm
Frequency Response
20 to 22,000Hz
Sensitivity
@ 1 kHz
97.5dB/mW
Impedance
@ 1 kHz
39Ω
Maximum Input Power
100mW
Battery Life
up to 45 hours
Weight
334g (11.8oz.)
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 30°C (14°F to 86°F)
Antenna Type
Internal Monopole
Gain
+2.60 dBi
Operating Frequency
2402MHz-2480MHz
Modulation Type
FHSS
RF Output Power
+13.92dBm ( EIRP)
Supported Codecs
✦ aptXTM
✦ aptX HD
✦ aptX Adaptive
✦ LDACTM
✦ SBC
✦ AAC
HEADPHONES BLUETOOTH
CABLES LENGTH
USB-C to USB-A 1m
2.5mm to 3.5mm 1.5m
SHUREPLUS
P LAY
™
DOWNLOAD OUR MOBILE LISTENING APP
iOS ANDROID
Visit shure.com to view
the online user guide
HAVE QUESTIONS?
WE’VE GOT YOU.
14
15
/