The Kogan KAMN27F7SB is a 27-inch Full HD monitor with a 75Hz refresh rate and FreeSync technology, making it ideal for gaming and other fast-paced applications. It features a VA panel with a 4000:1 contrast ratio and 178-degree viewing angles, delivering stunning visuals and immersive gaming experiences. The monitor also has multiple connectivity options, including HDMI and VGA ports, allowing you to connect various devices such as gaming consoles, PCs, and laptops. Additionally, it has a built-in 3.5mm headphone jack for private audio listening.
The Kogan KAMN27F7SB is a 27-inch Full HD monitor with a 75Hz refresh rate and FreeSync technology, making it ideal for gaming and other fast-paced applications. It features a VA panel with a 4000:1 contrast ratio and 178-degree viewing angles, delivering stunning visuals and immersive gaming experiences. The monitor also has multiple connectivity options, including HDMI and VGA ports, allowing you to connect various devices such as gaming consoles, PCs, and laptops. Additionally, it has a built-in 3.5mm headphone jack for private audio listening.
27" FULL HD 75HZ FREESYNC
FRAMELESS MONITOR
(1920 X 1080)
KAMN27F7SB
• Read all instructions before using the appliance and retain for reference.
• Only use the power adapter provided with this product.
• Do not use the power adapter with any other products
• Unplug the monitor before cleaning it.
• Use a clean, slightly dampened cloth to wipe the monitor casing.
• To clean the screen, turn the monitor off, unplug it and wait for it to cool
completely. Then, wipe it with a dry micro-fibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• Do not cover or block the ventilation holes in the monitor casing.
• Do not insert any object or spray any liquid into the vents.
• Do not place the monitor near heaters, stoves, fireplaces or other sources of heat,
as well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current
even when not plugged in.
The Adopted Trademarks HDMI, HDMI High-Definition
Multimedia Interface and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
in the United States and other countries.
SAFETY & WARNINGS
Monitor
Stand arm
Stand base
Power adapter
M4x10mm Screw
VESA Screws
M4x10mm (x4)
HDMI cable
User guide
COMPONENTS
Button
Description
1
Menu
• Opens the OSD menu.
• Enters sub menus.
2
Down
Navigates down in the menu
3
Up
Navigates up in the menu
4
Exit
Exits the menu
5
Power
Turns the monitor On/Off.
OVERVIEW
Monitor Ports
6
HDMI port
7
VGA port
8
3.5mm headphone jack
9
Power input port
1. Carefully remove the monitor, stand
connector and stand base from the
box.
2. Attach the stand base to the stand
arm using the supplied M4x10mm
screw.
3. Insert the stand assembly into the rear
of the monitor and push down until
firmly connected.
4. Lift the monitor up straight and remove
the bottom foam. Stand the monitor
up on the installed base.
ASSEMBLY
WARNING: The panel of the monitor is fragile. Keep the foam
underneath the screen while assembling the stand.
VESA mounting pattern 75x75mm, screw size M4.
Note: VESA mount or mounting accessories are NOT included.
1. Open the box, remove the monitor with the protection form attached and gently place
it on a desktop or table.
2. Remove any extra parts or foam covering the rear of the monitor.
3. Press the release button to remove the stand plate. If the monitor was already
attached to the stand, remove the stand.
4. Assembly the mount according to instructions provided with the mount.
Stand base
VESA MOUNT
Stand arm
Monitor
Stand plate
Mount not
included
Before connecting the monitor to your computer, please shut down the computer and
ensure the monitor is switched off.
Power Cable
Connect the included power adapter to the monitor power port, then connect the other end
to a power outlet.
HDMI
Connect the supplied HDMI cable from the computer’s HDMI port to the monitor’s HDMI
port.
HDMI Cable (included)
CONNECTIVITY
VGA
Connect a VGA cable (not included) from the computer to the monitor’s VGA port.
Earphones
Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor.
Note: If audio devices are plugged into the monitor and computer, there will be no sound.
VGA Cable (Not included)
Earphones (Not included)
1. Connect the monitor to the input device via HDMI/ VGA.
2. Connect the power adapter to the monitor and then connect the other end directly to a
power outlet.
3. Use the power button to turn the monitor on.
FreeSync
• Ensure your computer has FreeSync capability and the graphics drivers are fully up to
date.
• After connecting, you will receive a prompt to enable FreeSync on your computer. If you
do not receive the prompt, you may need to enable FreeSync in your graphics card
menu.
• See your graphics card manufacturer's documentation for instructions on how to
enable FreeSync.
On-Screen display (OSD) menu
The OSD menu allows adjustments to
various settings for the monitor. To access
the OSD press the menu button on the
monitor. Note: When using the monitor for
the first time, the monitor will configure the
optimal settings automatically.
1. Press the menu “ ”button to enter the OSD menu.
2. Use the up and down buttons to browse the settings. With the desired setting
highlighted, press the menu “ ” button to enter the sub-menu.
3. Use the up and down buttons to highlight the desired sub-menu item and press the
menu “ ” button to adjust the parameters.
4. Adjust the parameters using the up and down buttons and press the menu “ ”
button to confirm the settings and exit the current menu.
5. Press the exit “ ” button to exit the OSD menu.
OPERATION
OSD Menu
Main Menu
Sub-Menu
Options
Description
BRIGHTNESS
Picture
0–100
Adjusts the display brightness
Contrast
0–100
Adjusts the display contrast
Backlight
0–100
Adjusts the display backlight
Low blue
On
Enable/Disable blue light
reduction
Off
ECO modes
Standard, Text,
Game, Movie,
FPS, RTS
Preset colour modes
DCR
On
Turns the DCR function
on/off
Off
IMAGE
H. position
0–100
Adjusts the horizontal position
of the display (VGA only)
V. position
0–100
Adjusts the vertical position of
the display (VGA only)
Clock
0–100
Adjusts the clock setting
Phase
0–100
Adjusts the phase setting
Aspect
Wide (16:9), 4:3
Sets the aspect ratio
Freesync
On/Off
Turns display Freesync on/off
COLOURS
Warm mode
Red/Green/Blue
Adjust RGB levels
Cool mode
Red/Green/Blue
Adjust RGB levels
User mode
Red/Green/Blue
Adjust RGB levels
HDR mode
On/Off
Enable/disables HDR mode
Main Menu
Sub-Menu
Options
Description
OSD Setting
Reset
Language
English,
Español,
Русский,
Français, 한국,
Português,
Deutsch,
Türkçe, 简体中
文,
Polski, Italiano,
Nederlands
Sets OSD language
OSD H-Position
0–100
Adjusts OSD horizontal
position
OSD V-Position
0–100
Adjusts OSD vertical position
OSD
Transparency
0–100
Set OSD overall transparency
OSD time out
5~60
Set how long the OSD
remains open after last input
RESET
Image
None
Restore VGA image defaults
Colour
None
Automatically configure VGA
colour settings
Reset
None
Restore factory defaults
Power down
On
Enable/disable power down
function
Off
Time count
10-90min
Adjust time count
MISC
Signal source
VGA/HDMI
Adjust input source
Colour Modes
There are various pre-set colour modes suited for various use cases available on this monitor.
These can be accessed by pressing the up button. The modes include the following:
• Standard (suitable for most activities)
• Game (best suited general gaming)
• RTS (best suited when playing real-time strategy games)
• FPS (best suited when playing first-person shooter games)
• Movie (best suited when watching movies)
• Te x t ( b e s t s u i t e d w h e n r e a d i n g t e x t )
GamePlus
The GamePlus menu allows you to change the appearance of crosshairs that appear when
gaming. Press the exit “ ” button to access the GamePlus options.
COLOUR MODES & GAMEPLUS
Screen Size
27”
Aspect Ratio
16:9
Brightness
250cd/m2 (typical)
Panel
VA
Resolution
1920 x 1080
Refresh rate
75Hz
Response time
8ms
Viewing Angle
³ 178° (H) / ³ 178° (V)
Contrast Ratio
4000:1
VESA Mounting
75 x 75
Colours
16.7M
Free Sync
Yes
Signal Input
HDMI 1.4 (x1), VGA (x1)
Power
12V = 3.0A
Audio
Speakers
N/A
Audio Out
Yes
Accessories
Adapter
Yes
HDMI Cable
Yes
Additional Functions
Low Blue Light
Yes
Flicker Free
Yes
Physical Dimensions
Dimensions (W/ Stand)
614x459x183mm
Dimensions (W/ o Stand)
614x363x53mm
Net weight
3.84kg
Gross weight
5.29kg
SPECIFICATIONS
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
The Kogan KAMN27F7SB is a 27-inch Full HD monitor with a 75Hz refresh rate and FreeSync technology, making it ideal for gaming and other fast-paced applications. It features a VA panel with a 4000:1 contrast ratio and 178-degree viewing angles, delivering stunning visuals and immersive gaming experiences. The monitor also has multiple connectivity options, including HDMI and VGA ports, allowing you to connect various devices such as gaming consoles, PCs, and laptops. Additionally, it has a built-in 3.5mm headphone jack for private audio listening.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI