Kogan KAMN27F7USA is a 27-inch Full HD monitor with a 75Hz refresh rate and USB-C connectivity. It features a VA panel with a 1920 x 1080 resolution, 300 cd/m2 brightness, and a 4000:1 contrast ratio. The monitor has built-in speakers, an audio output jack, and a headphone jack. It also supports AMD FreeSync technology for smooth gaming. With its sleek design and versatile features, the Kogan KAMN27F7USA is a great choice for both work and play.
Kogan KAMN27F7USA is a 27-inch Full HD monitor with a 75Hz refresh rate and USB-C connectivity. It features a VA panel with a 1920 x 1080 resolution, 300 cd/m2 brightness, and a 4000:1 contrast ratio. The monitor has built-in speakers, an audio output jack, and a headphone jack. It also supports AMD FreeSync technology for smooth gaming. With its sleek design and versatile features, the Kogan KAMN27F7USA is a great choice for both work and play.
27” FULL HD 75HZ USB-C
FREESYNC MONITOR
(1920 x 1080)
KAMN27F7USA
• Read all instructions before using the appliance and retain for reference.
• Unplug the monitor before cleaning it.
• Use a clean, slightly dampened cloth to wipe the main monitor body.
• To clean the screen, turn it off unplug it and wait for it to cool completely, then wipe it
with a dry micro-fibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover
or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as
well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged
and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current even
when not plugged in.
The terms HDMI and HDMI High-Definition Multimedia
Interface and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
SAFETY & WARNINGS
Monitor
Stand arm
Base
Stand screw
(M6x14mm) (x1)
VESA screws (x4)
HMDI cable
USB-C cable
Power cable
User guide
COMPONENTS
Button
Function
1
Power
a. Press and hold the “Power” button for 6 seconds to turn the monitor
on/off.
b. When the monitor is on, press the "Power " to wake up the main
menu for one second.
c. Select "direction key" to select the items to be adjusted up and
down in the main menu. After selecting the items, click " Power " to
adjust. Click " Power " again to save and return to the upper menu.
2
Directional
Use to navigate menus. Pressing left and right while on a progress bar
will reduce and increase the functions respectively.
Shortcut button
a. Press the “Power” button right: source selection menu. Select the
signal source using the directional buttons and then press "Power"
button to confirm.
b. Press the “Power” button left: display mode menu. Select the
display mode using the directional buttons and then press "Power"
button to confirm.
c. Press the “Power” button up: Gameplus timer shortcut. Select the
desired timing length and then press "Power" button to confirm. To
exit, repeat the "Power" button up.
d. Press the “Power” button down: Gameplus sight shortcut. Select
the desired sight and then press "Power" button to confirm. To exit,
repeat the "Power" button up.
OVERVIEW
Button
Function
3
HDMI input
4
USB-C input
5
Audio out
6
Power input
1. Carefully remove the monitor, stand
arm and stand base from the box.
2. Attach the stand base to the stand
arm using the supplied M6 screw.
3. Insert the connection block into the
back cabinet and push down until
firmly connected.
4. Lift monitor up straight and remove
the bottom foam. Stand the monitor
up on the installed base.
ASSEMBLY
WARNING: The panel of the monitor is fragile. Keep the foam
underneath the monitor screen while assembling the stand.
VESA mounting pattern 75 x 75mm, screw size M4.
Note: VESA mount or mounting accessories are not included.
1. Open the box, take out the monitor with protection form attached and gently place
it on a desktop or table. Remove the extra parts and the foam covering the back of
the monitor. Press the release button to remove the stand plate. If the monitor was
already attached to the stand, remove the stand.
2. Assemble the mount as per the instructions provided with the mount.
Note: To prevent the monitor on the mount from failing, please install it firmly and protect it
fully. Do not place or hang any object on the mount. Ensure the height of the mount is less
than 2 meters.
VESA MOUNT
Stand base
Monitor
Stand plate
Button
Mount (not included)
Foam
Stand connector
Power cable
Connect the included power cable to the monitor power port, then connect the other end to
a power outlet.
Earphones (Audio Out)
Connect an audio cable to the 3.5mm audio port on the monitor (Audio In) and the 3.5mm
audio port on your computer.
CONNECTIVITY
USB-C
In order for the monitor to receive USB-C signals from the computer, use the USB-C cable to
connect the monitor to the computer.
HDMI
In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to
connect the monitor to the computer.
1. Connect the monitor to the input device via HDMI / TYPE-C.
2. Connect the power cable to the monitor, then connect the other end directly to a
power socket.
3. Use the power button to turn the monitor on.
On-Screen Display
The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and
appears on the screen after turning on the monitor and pressing the “Power” button.
When using the monitor for the first time, it will configure optimal settings automatically.
1. Press “Power” to enter the OSD menu.
2. Press “Power” up/down to browse functions.
3. With the desired function highlighted, press “Power” right to enter the
4. sub-menu.
5. Press “Power” up/down to browse sub-menus, then press “Power” to highlight the
desired function.
6. Press “Power” up/down to highlight an option, then press “Power” to confirm the
settings and exit the current screen.
7. Press “Power ” left to exit the current screen.
OPERATION
Refer to the following pages for a detailed list of the OSD menu functions.
Menu
Sub-Menu
Options
Description
Brightness
~0-100
Adjust display brightness
Contrast
~0-100
Adjust display contrast
DCR
ON/OFF
ECO
STANDARD/MOVIE
/TEXT/GAME
/FPS/RTS
Preset colour modes
Colour
Temperature
Standard
Select colour temperature mode or
allow manual colour configuration
Warm
Cool
sRGB
User Define
Red
~0-100
Adjust red value
Green
~0-100
Adjust green value
Blue
~0-100
Adjust blue value
Language
English,中文,
한국어, Deutsch,
Español, Français,
Italiano
Set OSD language
OSD Horizontal
0~100
Adjust OSD horizontal position
OSD Vertical
0~100
Adjust OSD vertical position
OSD Transparency
0~100
Set OSD overall transparency
OSD Time Out
10-60
Set how long the OSD remains
open after last input
Input Source
Auto Select/
HDMI/TYPE-C
Select input source or allow manual
selection
Mute
ON / OFF
Enable or disable monitor speaker
output
Volume
0-100
Adjust monitor speaker volume
Reset
/
Restore factory defaults
Display Size
Full Screen
Select the display's aspect ratio
4:3
Auto
Low blue
Off
Blue light reduction adjustment
Weak
Strong
Over Driver
On/ Off
This option makes panel
response time shorterd.
FreeSync
On/ Off
Enable or disable AMD FreeSync
FreeSync
• In order to use this feature, ensure your hardware has FreeSync capability and the
graphics drivers are fully up to date.
• After connecting, you may receive a prompt to enable the feature on your computer. If
you do not receive the prompt, you may need to enable the function in your graphics
card menu.
• See your graphics card manufacturer’s documentation for instructions on how to turn
on and/or enable FreeSync.
Press “Power” left to switch ECO modes. These modes include; Standard, Text, Movie,
Game, FPS and RTS and can be used to optimise settings according to your activity.
Standard mode is suitable for most activities.
ECO MODES
Screen size
27”
Aspect ratio
16:9
Brightness
300cd/m2 (typical)
Panel
VA
Resolution
1920 x 1080
Refresh rate
75Hz
Response time
7ms with Overdrive enabled (14ms typical)
Viewing angle
≥178°(H) / 178°(V)
Contrast ratio
4000:1
VESA mounting
100 x 100mm
Colours
16.7M
Signal input
HDMI 1.4 x 1, USB-C x 1
Power
100-240V ~50/60Hz 2.5A
Audio
Speakers
YES
Audio out
YES
Accessories
Power cable
YES
HDMI Cable
YES
USB-C Cable
YES
SPECIFICATIONS
Additional functions
Low Blue Light
YES
Flicker Free
YES
Physical dimensions
Dimensions (w. Stand)
615.3x455.3x247.3 (mm)
Dimensions (w/o Stand)
615.3x360.83x72.2 (mm)
Net weight
4.7kg
Gross weight
6.7kg
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Kogan KAMN27F7USA is a 27-inch Full HD monitor with a 75Hz refresh rate and USB-C connectivity. It features a VA panel with a 1920 x 1080 resolution, 300 cd/m2 brightness, and a 4000:1 contrast ratio. The monitor has built-in speakers, an audio output jack, and a headphone jack. It also supports AMD FreeSync technology for smooth gaming. With its sleek design and versatile features, the Kogan KAMN27F7USA is a great choice for both work and play.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Asus ROG STRIX XG49VQ User manual
-
Asus ROG STRIX XG27WQ User manual
-
Asus TUF Gaming VG249Q User guide
-
Asus TUF Gaming VG279QL1A User guide
-
Asus ROG Strix XG43UQ Xbox Edition User guide
-
Asus ROG Strix XG27AQV User manual
-
Asus TUF Gaming VG28UQL1A User guide
-
Asus VA247HE User guide
-
Asus MG279 Series User manual
-
Asus VP278QG User guide