RAB EZPAN FA 1×4 LED Panel Installation guide

Brand: RAB

Model: EZPAN FA 1×4 LED Panel

Type: Installation guide

RAB EZPAN FA 1×4 LED Panel is suitable for indoor use only with recessed ceiling mounting. It has universal voltage driver that permits operation at 120V through 277V, 50 or 60 Hz.

The wattage and color temperature of the fixture can be field-adjusted. The factory settings are 4000K and 30W. The fixture can be adjusted to 25W/3500K, 30W/4000K, or 40W/5000K.

The fixture is suitable for damp locations, with a 90°C vapor barrier. It requires 9/16” or 15/16” flat tee grid in both insulated ceilings and non-insulated ceilings. Access above the ceiling is required for installation.

RAB EZPAN FA 1×4 LED Panel is suitable for indoor use only with recessed ceiling mounting. It has universal voltage driver that permits operation at 120V through 277V, 50 or 60 Hz.

The wattage and color temperature of the fixture can be field-adjusted. The factory settings are 4000K and 30W. The fixture can be adjusted to 25W/3500K, 30W/4000K, or 40W/5000K.

INSTRUCTIONS

EZPAN® FA 1x4, 2x2, 2x4 INSTALLATION





IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.







WARNING: Make certain power is OFF before installing or maintaining  xture.

WARNING: Risk of  re or electric shock. Suitable for damp locations.

WARNING: Suitable for 9/16” or 15/16”  at tee grid in both insulated ceilings and non-insulated ceilings. Access above

ceiling required.

WARNING: Do not handle energized  xture when hands are wet, when standing on wet or damp surfaces, or in water.

WARNING: Vapor barrier must be suitable for 90° C.

WARNING: Fixture to be independently supported to building structure.







To mount in an insulated or non-insulated ceiling - 9/16” or 15/16”



1. Grid Clips 

Fig. 1.

2. Rotate and slide the Fixture

Tee-Grid Bar 

Fixture to the Tee-Grid Bar.

3. 

FixtureSupport Wires (supplied by

others) through the Grid Clip Hole

4. Splice Box and Access

Plate

5. Loosen Access Plate Screw and remove the Access Plate.

Conduit Knockouts on the Access Plate to



(Fig. 4).

6. 

Splice Box



 WARNING: To prevent wiring damage or

abrasion, do not expose wiring to edges of sheet metal or

other sharp objects.

7. Access Plate and tighten Access Plate Screw.

EZPAN FA 1x4 EZPAN FA 2x2 EZPAN FA 2x4







 Access Plate Conduit Knockouts

Fixture

Grid Clip Tee-Grid Bar

Access Plate Screw

Splice Box

Fixture

Firmly bend Grid

Clips up and out

Grid Clip Hole

Grid Clip

Power Feed

Support Wire (supplied by others)

1.6”

INSTRUCTIONS

EZPAN® FA 1x4, 2x2, 2x4 INSTALLATION









.

1. LINE

2.  COMMON 

3. GROUND 

4. 

5.  (or gray)

NOTE: Do not connect DIM V+ (purple)/ DIM V- (pink/gray) to line

voltage or supply ground.





(1X4, 2X2), 40W (2X4)

1. Locate the Selector Switches 

2. 



3. 

insert the Silicone Cover

Fig. 5

Selector Switches

Silicone Covers



1. 

directions.

2. 



CAUTION: Be sure  xture temperature is cool enough to touch.

Do not clean or maintain while  xture is energized.

1. 

solution.

2. 

PINK (or GRAY)

LIGHT

FIXTURE

Vaux 12V

YELLOW

GROUND

( - ) DIM V

( + ) DIM V

COMMON

LINE BLACK

WHITE

PURPLE

INSTRUCTIONS

EZPAN® FA 1x4, 2x2, 2x4 INSTALLATION

EZPAN FA-IN-0522 RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty

 OPERATION





CAUTION: FOR BATTERY BACKUP FIXTURE. 

in BATTERY. 



BATTERY

 (Fig. 6)

NOTE: 







CAUTION: 









1. 



2. 



3. 



1. 

2. 



3. 

Note: These instructions do not cover all details or variations in

equipment nor do they provide for every possible situation during

installation, operation or maintenance.

1. UNSWITCHED HOT HOT AC

2. UNSWITCHED circuit, connect UNSWITCHED and

SWITCHED lines together.

3. SWITCHED circuit, connect SWITCHED HOT

lead to the external.

4. (or gray)

5. DIMDIM

GROUND

6. 

7. 

connect the BATTERY.

 



charging.

9. 







1. 

illuminated, indicating that the BATTERY

2. 

(internal battery)





3. 

automatically returns to charging mode.

LIGHT

FIXTURE

INSIDE FIXTURE

BATTERY

Pink (or Gray)/DIM–

Black/Switched Line

Green/Ground

White/Neutral

Black/Unswitched Line

Purple/DIM+

BACKUP

DRIVER

BATTERY

CONNECTOR:

CONNECT

ONLY AFTER

AC SUPPLY

POWER IS

CONNECTED

Easy Answers

rablighting.com

Visit our website for product info

Tech Help Line

Call our experts: 888 722-1000

e-mail

Answered promptly - [email protected]

Free Lighting Layouts

Answered online or by request



73665-RAB

EMERGENCY BATTERY

TTING

PRODUCT WATTAGE

SI O

DIP SWITCH

PO TI N (12W)

EZPANFA1X4 25-30-40

2 = On

EZPANFA2X2 25-30-40

EZPANFA2X4 30-40-50

Fig. 6

Fig. 7

RAB EZPAN FA 1×4 LED Panel Installation guide

Brand: RAB

Model: EZPAN FA 1×4 LED Panel

Type: Installation guide

RAB EZPAN FA 1×4 LED Panel is suitable for indoor use only with recessed ceiling mounting. It has universal voltage driver that permits operation at 120V through 277V, 50 or 60 Hz.

The wattage and color temperature of the fixture can be field-adjusted. The factory settings are 4000K and 30W. The fixture can be adjusted to 25W/3500K, 30W/4000K, or 40W/5000K.

Download PDF

report

RAB EZPAN FA 1×4 LED Panel Installation guide

RAB EZPAN FA 1×4 LED Panel Installation guide

Related papers

Other documents