2. Mti Baths
  3. MBISC6036

Mti Baths MBISC6036 Operating instructions

  • Hello! I'm your assistant, and I've reviewed the product details for the MTI BASICS tubs, including models MBISC6036A, MBAISC6036A and MBWISC6036A. This document provides specifications for alcove installation tubs, details about the different packages including Soaker, Air Bath and Whirlpool options, their features and available accessories such as pillows and different drain finishes. I'm ready to answer any questions you have about these tubs!
  • What is included in the Soaker package?
    What is included in the Air Bath package?
    What is included in the Whirlpool package?
    What drain configuration options are available?
MTI BASICS® Tubs
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Rev. 12 10 2021 ©2021 by MTI Baths, Inc. Modification Rights Reserved.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
Package Package Content
Soaker Soaking bath - No jets. Integral front skirt, 3-sided integral
tile flange and textured bottom.
Air Bath
12 air jets, heated air blower, pre-leveled foam base,
textured bottom, integral front skirt and 3-sided tile flange.
pre-leveled foam base increases overall tub height 2”-3”
Whirlpool 6 point-massage jets, 1-bhp pump, integral front skirt,
3-sided integral tile flange and textured bottom.
Options
Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump
For Soaker & Air Bath (MBHTI SOAK)
heater with recirculating pump
Accessories
.
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MBWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB)
˚ Before ordering or installing, consider access to equipment.
˚ Integral flat front skirt is not removable.
˚ Must specify left- or right-hand drain when ordering.
˚ Use proper bedding compound to fully level and support the tub.
˚ Tubs equipped with an air system or factory installed pre-leveled foam base are
designed to install directly onto a flat level subfloor.
˚ Location of all therapy components is predetermined and cannot be changed.
˚ Suction and control locations may vary.
˚ Options listed cannot be combined with Designer Collection options.
Important Ordering and Installation Information Hydrotherapy Package Components Included GFCI / 110V
Soaker with Optional
Inline Heater
½-bhp pump, inline
heater 1-15 amp
Whirlpool or Air Bath 1-bhp pump 1-15 amp
Whirlpool with Optional
Inline Heater
1-bhp pump, inline
heater 1-20 amp
Air Bath with Optional
Inline Heater
heated blower, ½-bhp
pump, inline heater 2-15 amp
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Part #
MBSISC6036A
MBAISC6036A
MBWISC6036A
Pump extrudes
4”-5“ beyond
tub deck
59½"
8¾"
36"
54"
2¾"
3½"
3½"
2¾"
46¼"
112°
19"
AFR
12" 14¼"
28¾"
23"
Tile Flange
height is 1½”
CSA # MTIS-ISC6036
Shown with Whirlpool Package
MBISC6036A
59.5” x 36” x 19”
Installation: Alcove
Material: Acrylic
Plumbed Weight: 135 lbs / 61 kg
Soaker Weight: 115 lbs / 52 kg
Average Fill: 41 gal to above jet level
Maximum Fill: 51 gal to overflow
Compliance
Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-
1995
CSA Certified C/US
/