MTI MBRR6630E Operating instructions

MBRR6630E
MTI
Brand
MTI
Model
MBRR6630E
Type
Operating instructions

Below you will find brief information for MBRR6630E, MBSRR6630E, MBARR6630E, MBWRR6630E. This document details the specifications and options for MTI Basics bathtubs, including soaker, air bath, and whirlpool models. It outlines dimensions, material, weight, and fill capacities. It also provides package content details like jets, pumps, and textured bottoms, as well as accessories such as drain & overflow, pillows, and tile flange installation options. This document contains important information for ordering and installation.

Below you will find brief information for MBRR6630E, MBSRR6630E, MBARR6630E, MBWRR6630E. This document details the specifications and options for MTI Basics bathtubs, including soaker, air bath, and whirlpool models. It outlines dimensions, material, weight, and fill capacities. It also provides package content details like jets, pumps, and textured bottoms, as well as accessories such as drain & overflow, pillows, and tile flange installation options. This document contains important information for ordering and installation.

MTI BASICS® Tubs
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Rev. 12 10 2021 ©2021 by MTI Baths, Inc. Modification Rights Reserved.
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
Package Package Content
Soaker Soaking bath - No jets. Includes textured bottom.
Air Bath
12 air jets, heated air blower, pre-leveled foam base and
textured bottom. Pre-leveled foam base increases overall
tub height 2”-3”
Whirlpool 6 point-massage jets, 1-bhp pump and textured bottom
Options
Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump
For Soaker & Air Bath (MBHTI SOAK)
heater with recirculating pump
Accessories
.
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MBWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB)
Installation Options
. Must be ordered at time of purchase.
Tile Flange
Factory-Installed rigid ABS
3 sides (MBTFK3), 2 sides (MBTFK2),
1 side (MBTFK1)
Must specify flange location(s) on order.
Pre-Leveled Foam Base
5’ Tubs (MBPLFOAM)
5.5’ & 6’ Tubs (MBPLFOAM2)
All airbaths include a pre-leveled foam base.
Pre-Leveled Frame and
Foam Base with Skirting
Raised Fixed Panel
5’ Tubs (MBFSKAO5), 5.5’ Tubs (MBFSKAO55),
6’ Tubs (MBFSKAO6)
Raised Removable Panels
5’ Tubs (MBFSKAR5), 5.5’ Tubs (MBFSKAR55),
6’ Tubs (MBFSKAR6)
˚ Before ordering or installing, consider access to equipment.
˚ Always measure tub on-site before building tub deck.
˚ Use proper bedding compound to fully level and support the tub.
˚ Tubs equipped with an air system or factory installed pre-leveled foam base are
designed to install directly onto a flat level subfloor.
˚ Tub height is increasd up to 3” when equipped with factory-installed foam base.
˚ Location of all therapy components is predetermined and cannot be changed.
˚ Options listed cannot be combined with Designer Collection options.
Important Ordering and Installation Information Hydrotherapy Package Components Included GFCI / 110V
Soaker with Optional
Inline Heater
½-bhp pump, inline
heater 1-15 amp
Whirlpool or Air Bath 1-bhp pump 1-15 amp
Whirlpool with Optional
Inline Heater
1-bhp pump, inline
heater 1-20 amp
Air Bath with Optional
Inline Heater
heated blower, ½-bhp
pump, inline heater 2-15 amp
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Part #
MBSRR6630E
MBARR6630E
MBWRR6630E
CSA # MTIS-RR6630E
59¼"
47¼"
129°
18¼"
15¾"
17¼"
15"
19"
65¾"
30"
25¼"
19½"
21"
8"
3"
4½"
Shown with Whirlpool Package
MBRR6630E
65.75” x 30” x 19”
Installation: Drop-In
Material: Acrylic
Plumbed Weight: 140 lbs / 64 kg
Soaker Weight: 115 lbs / 52 kg
Average Fill: 30 gal to above jet level
Maximum Fill: 80 gal to overflow
Compliance
Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-
1995
CSA Certified C/US
  • Page 1 1

MTI MBRR6630E Operating instructions

MBRR6630E
MTI
Brand
MTI
Model
MBRR6630E
Type
Operating instructions

Below you will find brief information for MBRR6630E, MBSRR6630E, MBARR6630E, MBWRR6630E. This document details the specifications and options for MTI Basics bathtubs, including soaker, air bath, and whirlpool models. It outlines dimensions, material, weight, and fill capacities. It also provides package content details like jets, pumps, and textured bottoms, as well as accessories such as drain & overflow, pillows, and tile flange installation options. This document contains important information for ordering and installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents