2. LOCKER DOWN
  3. LD2048

LOCKER DOWN LD2048 User manual

  • Hello! I've read the installation instructions for the LOCK'ER DOWN LD2048 and LD2048EX Security Products designed for 2010-2021 Toyota 4Runner. This document provides step-by-step guidance on how to install the safe, including necessary tools and components. I'm ready to assist with any questions you may have about its installation process.
  • What is recommended before installing the safe?
    What should be removed from the console before installation?
    What tools are needed for installation?
    How many 10mm bolts are included?
1. For any combination style lock, it is a good idea to set the combination before installing the
safe. We recommend that the combination be set with the DOOR OPEN in order to test the
lock combination effectively without locking yourself out.
2. Clear out the contents of the center console for now, including the factory mat at the bottom of
the console.
3. Remove the neoprene padding from the inside of the safe for now.
4. Remove the 2 Bolts at the bottom of the console compartment.
5. Set the safe into the center console.
a. The slots at the bottom of the safe should line up with the slots where the bolts were
removed from Step 4.
6. Secure the safe to the console compartment using the 2 10mm BOLTS provided by
LOCK’ER DOWN.
7. Tighten the bolt, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.
8. Re-insert the padding that was removed from the safe before installation.
9. Enjoy your purchase!
Tools Needed:
• IMPACT DRILL or SOCKET WRENCH
• 10mm Socket bit
Contents Included: 4 10mm Bolts.
Security Products
INSTALLATION INSTRUCTIONS
LD2048/LD2048EX
[2010-2021 Toyota 4Runner]
/