Savoy House 7-1610-6 User manual

ITEM NO.: 7-1610-6

Stem

Ball Nut (2)

Canopy (1)

Crystal

Socket

Bulb

(NOT Included)

Connector (3)

Center Tube (4)

Nipple (5)

Frame

ASSEMBLY INSTRUCTIONS

1. Carefully unpack and identify all parts referring to illustration for parts identification.

2. Turn the power to the installation point OFF.

3. Install the center tube (4) to the nipple (5).

4. Install the connector (3) to the center tube (4).

5. Determine the desired height at which the pendant will be installed and select the stems.

6. Thread the wire through the stems and thread the first stem onto the connector (3), longest stem first.

Repeat process until all required stems are thread together.

7. Refer to the additional installation instructions included with the product for wiring and installation.

8. Install the canopy (1) to the ceiling using the ball nut (2).

9. Install proper bulbs (not included) into each socket referring to the markings and/or labels on the

fixture for maximum wattage.

10.Restore power to the installation point and retain this sheet for future reference.

TOP VIEW