Home Styles 5086-95 Assembly Instructions

Brand: Home Styles

Model: 5086-95

Type: Assembly Instructions

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver

88 5086 95C

Kitchen Cart

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Small Hex Wrench

1 pc.

Hex Wrench

1 pc.

M6x35

Head Cap Bolt

14 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

32 pcs. (+1 extra)

M3.5x13

Wood Screw (short)

24 pcs. (+1 extra)

M4x16

Wood Screw

22 pcs. (+1 extra)

Wood Plug

10 pcs. (+2 extra)

Adjustable Pin

8 pcs. (+1 extra)

M4x25

Machine Screw

12 pcs.

Refer to later page(s) of these

instructions for drawer assembly.

Drawer

1 pc.

Drawer

3 pcs.

Pipe

3 pcs.

Base Rack

1 pc.

Door

1 pc.

Door

1 pc.

Gate Leg

1 pc.

Side Rack

1 pc.

Side Rack

1 pc.

Round Arm

1 pc.

Handle Arm

2 pcs.

Shelf

2 pcs.

Base

1 pc.

Back Piece

2 pcs.

Front Rail

3 pcs.

Back Stretcher

1 pc.

Front Stretcher

1 pc.

Back Panel

3 pcs.

Middle Panel

1 pc.

Middle Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Top

1 pc.

Cam Lock

4 pcs. (+2 extra)

Cam Lock Screw

4 pcs. (+1 extra)

Pull Handle

6 pcs.

Caster

2 Locking

2 Non-Locking

4 pcs.

Assembly Instructions 2/7

Figure 1

IMPORTANT

 Use a soft cloth between these parts and the ﬂoor.

 Do not use power tools above 8 volts to assemble.

 Do not tighten all the bolts until each part is properly assembled.

 Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.

Cam Lock Screw

STEP 1

Insert Cam Lock Screws into pre-drilled

holes of Top (A). (See Figure 1)

Figure 2

STEP 3

Attach Back Pieces (G) to

Middle Panels (D) and (E).

Attach Front Rails (J) to

Middle Panels (D) and (E).

Locking Caster

Non-Locking Caster

Wood Screw

STEP 2

Attach Casters underneath Base (K)

with Wood Screws into pre-drilled holes,

with Locking Casters at front.

(See Figure 2)

Note: ‘Arrow’ sticker indicates front of Base (K).

‘Arrow’ sticker at front

STEP 6

Attach Side Rack (R) to unit with Head Cap Bolt.

Slide Base Rack (T) and Pipes (U) into Side Rack (R).

Attach Side Rack (S) to unit with Head Cap Bolt.

STEP 5

Slide Back Panels (F) into place.

Attach Back Stretcher (H) and

Front Stretcher (I) to unit with

Head Cap Bolts.

Attach Side Panel (C) to unit

with Head Cap Bolts.

Head Cap Bolt

Assembly Instructions 3/7

STEP 4

Attach unit to Base (K).

Attach Side Panel (B) to unit with

Head Cap Bolts. (See Figure 3)

Figure 3

Head Cap Bolt

Assembly Instructions 4/7

STEP 7

Attach Handle Arms (M) to

Side Panel (C) with Head Cap Bolts.

Slide Round Arm (N) into place.

Attach Gate Leg (Q) to back of unit

with Wood Screws into pre-drilled

holes. (See Figure 4)

Head Cap Bolt

Figure 4

Wood Screw

STEP 8

Insert Adjustable Pins into

side panels and middle panels

at desired level.

Place Shelves (L) into position.

Attach Doors (O) and (P) by

sliding door lift hinges

into side panel lift hinges.

(See Figure 5)

Attach Pull Handles to Doors (O)

and (P) with Machine Screws.

(See Figure 6)

Figure 5

Figure 6

Adjustable Pin

Part List

Assembly Instructions 5/7

STEP 9

Attach Drawer Front (V1) and Drawer

Back (V2) to Drawer Side (V3) with

Wood Screws (long).

Attach Drawer Side (V4) to unit with

Wood Screws (long).

STEP 10

Slide Drawer Bottom (V5) into the grooves

of Drawer Sides (V3) and (V4) until it meets

Drawer Front (V1).

Attach Drawer Bottom (V5) to unit with

Wood Screws (short).

STEP 11

Attach Pull Handle with Machine Screws.

V1.

Drawer Front

3 pcs.

V2.

Drawer Back

3 pcs.

V3.

Drawer Side

3 pcs.

V4.

Drawer Side

3 pcs.

V5.

Drawer Bottom

3 pcs.

Drawer (V)

Bottom

Roller at back

Wood Screw (long)

Wood Screw (short)

Machine Screw

Pull Handle

Part List

Assembly Instructions 6/7

Drawer (W)

STEP 13

Slide Drawer Bottom (W5) into the grooves

of Drawer Sides (W3) and (W4) until it meets

Drawer Front (W1).

Attach Drawer Bottom (W5) to unit with

Wood Screws (short).

STEP 14

Attach Pull Handle with Machine Screws.

W1.

Drawer Front

1 pc.

W2.

Drawer Back

1 pc.

W3.

Drawer Side

1 pc.

W4.

Drawer Side

1 pc.

W5.

Drawer Bottom

1 pc.

Roller at back

STEP 12

Attach Drawer Front (W1) and Drawer

Back (W2) to Drawer Side (W3) with

Wood Screws (long).

Attach Drawer Side (W4) to unit with

Wood Screws (long).

Bottom

Wood Screw (long)

Wood Screw (short)

Machine Screw

Pull Handle

Assembly Instructions 7/7

Figure 7

STEP 15

Attach Top (A) to unit with

Cam Locks. (See Figure 7)

Slide Drawers (V) and (W) into position.

Cam Lock

STEP 16

Cover all holes with Wood Plugs.

(See Figure 8)

Figure 8

Wood Plug

NEVER

use glass cleaners on

finished furniture. Ammonia

chemically attacks the finish.

allow liquids to remain on furniture.

Absorption causes parts to warp

and split and finishes to delaminate.

NEVER

CARE INSTRUCTIONS

Do not use rubber

based placemats.

PREVENT

DISCOLORING

Do not use commercial

waxes and polishes.

PREVENT

YELLOWING

Do not place hot

objects on surface.

PREVENT

FINISH DAMAGE

Do not write

directly on surface.

PREVENT

MARKING

Do not use power tools

above 8 volts to assemble.

PREVENT

CRACKING

Do not place

in direct sunlight.

PREVENT

FADING

with a soft cloth moistened

in lukewarm soap and water.

Buff with a dry clean cloth.

CLEAN

Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of

purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized

retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled

items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:

www.homestyles-furniture.com/customer-service/replacement-parts

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

Home Styles 5086-95 Assembly Instructions

Home Styles 5086-95 Assembly Instructions

Home Styles 5086-95 Assembly Instructions

Other documents