Intermec 751G Operating instructions

Use the DB9 Extender (P/N 592128) to be able to attach a

button link reader to your CN2G or 751G serial adapter.

To install the DB9 extender

Remove the two screws from the female connector side of the

DB9 extender.

DB9

extender

Female

connector

2 Attach the female connector side of the DB9 extender to the

DB9 connector on the serial adapter and insert the two

screws.

DB9

connector

Male

connector

DB9

extender

DB9 extender: This example shows installing the DB9 extender on the CN2G

serial adapter.

DB9 Extender Instructions

6001 36th Avenue West

Everett, WA 98203

U.S.A.

www.intermec.com

DB9 Extender Instructions

*075194-001*

P/N 075194-001

This manual is also suitable for

Download PDF