Avantree BTCK-10BS is a wireless car kit designed to enhance your in-car calling experience. With its motion sensor, it automatically powers on when you enter your car and connects to your phone via Bluetooth. It supports multipoint connection, allowing you to pair two phones simultaneously and seamlessly switch between them. The device features a microphone mute button for privacy, and you can transfer calls between your phone and the car kit with ease. Additionally, it offers voice dialing and redialing functions, enhancing your convenience on the road.
Avantree BTCK-10BS is a wireless car kit designed to enhance your in-car calling experience. With its motion sensor, it automatically powers on when you enter your car and connects to your phone via Bluetooth. It supports multipoint connection, allowing you to pair two phones simultaneously and seamlessly switch between them. The device features a microphone mute button for privacy, and you can transfer calls between your phone and the car kit with ease. Additionally, it offers voice dialing and redialing functions, enhancing your convenience on the road.
User Manual
Wireless Car Kit
BTCK-10BS
Product Overview
What’s In the Box
Basic Operations
Set Up
“Auto Power On/O” function
Pairing a mobile phone
To add another phone (multipoint function)
Reconnection
Restore to default settings
How to charge
Troubleshooting
1
1
2
2
3
3
4
4
5
5
6
······················································································································································
·······················································································································································
··········································································································································································
····························································································································
·········································································································································
································································································
····························································································································································
···································································································································
··························································································································································
······················································································································································
····················································································································································
Auto Power On
Overview
What’s In the Box
1. Avantree 10BS
2. USB car charger
3. USB charging cable
4. Sun-visor clip
1
MFB
Micro USB
Press / once
Basic Operations
Set Up
Remove the Insulating sheet / Install the battery / Install sun-visor clip
2
Button Function Operation
Reject a call
Press onceEnd a call
Power on / o
Answer a call
Re-dialing
Press and hold for 2s
Press and hold for 4s
Press once
Voice dialing (phone feature) Press once
Double click
Volume up / down
Mute button Mute/Un-mute the microphone
Transfer calls between10BS and
mobile phone
Multipoint function o/on Press and hold / for 3 seconds
Press Mute button once (during a call)
Press and together (during a call)
&
Basic Operations
Set Up
Remove the Insulating sheet / Install the battery / Install sun-visor clip
3
4:30
4G
Settings Bluetooth
Bluetooth
Avantree 10BS
Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
Auto Power On
Hold for 4s
“Auto Power On/O” function
10BS comes with motion sensor. It will auto power on when it detects any motion (e.g. opening the car
door) and will auto power o after disconnect over 10 minutes.
How to enable/disable the function
Manually power on/o the car kit by pressing and holding the MFB for 4 seconds, will enable/disable
this function.
Note: If you want to use auto power on function, please do NOT power o the car kit manually.
Pairing a mobile phone
1. Set 10BS to PAIRING MODE - From o status, press and hold the MFB button for 7 seconds until LED
indicator ashes BLUE and RED alternately.
2. Activate Bluetooth on your phone; search and select, ”Avantree 10BS” to connect.
Auto Power On
ashes BLUE and RED
To add another phone (multipoint function)
1. Pair and connect the 10BS with the rst phone as above.
2. Power o the 10BS, set 10BS into PAIRING MODE as above to pair and connect the 2nd phone.
3. Power o and power on 10BS again. It will automatically connect with the two phones. If not, you
may need to manually tap “Avantree 10BS” on your phone to connect.
Reconnection
Normally, the 10BS will automatically reconnect the last 1 paired device once it’s power on. For other
devices, you may need to manually click " Avantree 10BS" on your phone to reconnect.
Note: To ensure the success of auto re-connection with 2 devices (including the last 1 paired device),
please activate Bluetooth on the 2 phones before opening the car door.
4
4:30
4G
Settings Bluetooth
Bluetooth
huawei
Avantree 10BS
Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30
4G
Settings Bluetooth
Bluetooth
huawei
Avantree 10BS
Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30
4G
Settings Bluetooth
Bluetooth
huawei
Avantree 10BS
Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
Auto Power On
Press Once
Restore to default settings
You may nd it necessary to reset the 10BS if it is not working as expected. After it is reset to factory
default settings, all the paired mobile phone information will be erased.
1. Set 10BS to PAIRING MODE - From o status, press and hold the MFB button for 7 seconds until LED
indicator ashes BLUE and RED alternately.
2. Double click the MFB button - you will see LED ashes BLUE and RED together very quickly about 2
times and then 10BS will turn o automatically.
Note: For successful connection, please also delete the paired information from your phone and re-pair
with 10BS.
How to charge
When the LED ashes RED every 6 seconds, you should fully recharge the device for about 3 hours. The
LED will remain RED while charging and then turn o when charging is complete.
You can plug the 10BS into a USB wall charger/car charger (DC 5V / 0.5-1A) or computer USB port that is
powered on.
5
Hold for 7S
ashes BLUE and RED
Double Click
Auto Power On
Auto Power On
DC 5V / 0.5-2A
OR
Troubleshooting
1. 10BS won’t auto power on when I enter the car?
Please make sure you DID NOT MANUALLY POWER OFF THE CAR KIT. Doing so will disable the “auto
power on” function. Details please refer to “Auto Power On/O” function chapter.
2. 10BS continuously beeps while driving?
The 10BS comes with motion sensor. It will auto power on when it detects any motion (e.g. opening
the car door). Once it powers on, it will BEEP and try to auto-reconnect with the last paired mobile
phone. If not successful, it will auto power o after 10 minutes and BEEP again. Please make sure
your phone’s Bluetooth is activated, or you may need to disable the Auto Power On function (refer
to “Auto Power On/O” function chapter).
3. 10BS can't pair and connect with 2 devices at the same time?
If 10BS fails to connect two phones, please conrm the multipoint function is on. While in standby
mode, press and hold the "V-" / "V+"buttons for 3s until you hear a beep to turn on/o the Multipoint
function.
6
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Avantree BTCK-10BS is a wireless car kit designed to enhance your in-car calling experience. With its motion sensor, it automatically powers on when you enter your car and connects to your phone via Bluetooth. It supports multipoint connection, allowing you to pair two phones simultaneously and seamlessly switch between them. The device features a microphone mute button for privacy, and you can transfer calls between your phone and the car kit with ease. Additionally, it offers voice dialing and redialing functions, enhancing your convenience on the road.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Mediatech MT6215 Datasheet
-
Lenovo 4865 Hardware Maintenance Manual
-
iogear GBHFK231W6 User manual
-
Definitive Technology BP10B User manual
-
NoiseHush N620 User manual
-
Oakton T-100 Owner's manual
-
-
ADJ Mystic LED User manual
-
Lenovo ThinkCentre M78 Safety, Warranty, And Setup Manual
-
CharGriller 2121 Owner's manual