Avantree 10BP User manual

Brand: Avantree

Model: 10BP

Category: Mobile headsets

Type: User manual

Avantree 10BP is a Bluetooth car kit that allows you to make and receive calls wirelessly through your car's audio system. It features Bluetooth 4.0 technology for a stable connection and supports HSP, HFP, and A2DP profiles, enabling you to stream music and receive GPS instructions through your car speakers. The 10BP has a built-in microphone for hands-free calling, and its multipoint function allows you to connect two phones simultaneously. With up to 12 hours of talk time and 980 hours of standby time, the 10BP ensures you stay connected on the road.



1. Productoverview



2. Accessories

1).USBcarcharger

2).USBchargingcable

3).Sun‐visorclip

4).Rechargeablelithiumbattery



Note:Allaccessoriesarealsoavailableonavantree.com.



3. Pairingandconnecting

Underpairingmode,theLEDwillflashblueandredalternately.

Step1 Ensurethecarkitisoff.

Step2 Press and hold MFB button for 7 seconds until LED indicator flashes blue and red alternately. Once

turnedonthespeakerphone,ifnotdetectedanyconncetion,itwillautomaticallygotopairing 

mode.

Step3 ActivateBluetoothonyourphoneandselect‘AvantreeBTCK‐10B’.

Step4 Thespeakerphoneisreadyforusenow.



Note:Oncepairedandconnected,thespeakerphonewillbeautomaticallyconnectedtothedevicewhenever

you turn the speakerphone on  again, provided the device is in range. When losing connection, the

speakerphonewillautomaticallyswitchitselfoffafter30minutes.



4. Howtouse



Button Function Operation

MFB

Poweron/off Pressandhold MFBfor4s.

Answeracall PressMFBonce

Rejectacall PressandholdMFBfor2s.

Endacall PressMFBonce

Voicedialing(phonefeature) PressMFBonce

Re‐dialing DoubleclickMFB

V+ Volumeup PressV+once

V‐ Volumedown PressV‐ once

Mute

button

Mutethemicrophone Press Mutebuttononce (duringacall)

Un‐mutethemicrophone PressMutebuttononce

V+ Multipointfunctionon Pressandhold V + for3seconds

V‐ Multipointfunctionoff Pressandhold V ‐for3seconds

V+&V‐

Transfercallsduring

speakerphonetomobile

phone



PressV‐andV+together(duringacall)

Note:somefunctionsaremobiledependentandmaynotworkwithsomephones.TheLEDwillshowred

duringmutemode.Contactusat[email protected]fordetails.



5. Howtopairwithtwomobilephonesimultaneously(multipointfunction)

Thedefaultsettingof10BP’smultipointfunctionison.

Step1 Pairandconnect10BPwiththefirstphoneasabove.

Step2 Turnoff the speakerphone. Press and hold MFB button for 7 seconds until LED flashes red and blue

alternately.Pairandconnectwiththesecondphoneasabove.

Step3 Poweroffandpoweron10BPagain.Thenitwillautomaticallyconnectwiththelast2pairedphones



6. Restoretodefaultsettings

Youmayneedtoreset10BPifitisnotworkingasexpected.Whenitisresettofactorydefaultsettings,allthe

pairedmobilephonesinformationwillbeerased.

Step1:PressandholdbothV+andV‐forabout10secondsuntiltheLEDflashesblueandred,thenreleasethe

buttons.

Step2:Poweroff10BP.Afterbeingpoweredonagain,itwillenterpairingmodeautomatically.



7. Howtocharge

Whenthe battery becomes low, theLED will flash red every 3 seconds,and you shouldrechargeyour 10BP.

Pleasechargebyusingthesuppliedcarcharger,USBchargerorPCUSBport.Itnormallytakesabout3hoursto

fullychargethebattery.TheLEDwillindicateredwhencharging

andoffwhenchargingiscomplete.



Charging requirements: You canplug our supplied USB cable to yourown USB chargers (wall charger/travel

charger/carcharger, etc.) with5V/500mA‐1Aor PC USBport. It isOK to usemost mobilephonechargerson

themarket.



8. Productspecification



z Bluetoothcompliance:BluetoothV4.0

z Operatingfrequencyband:2.4GHz~2.48GHzunlicensedISMband

z Operationrange:Class2,upto10metres

z Supportprofiles:HSPandHFPProfiles,A2DPProfile(GPSinstructionannouncementandmusic)

z Stand‐bytime:Upto980hours/40days

z Talktime:Upto10‐12hours

z BatterychargingTime:About3hours

z Chargervoltage:DC5.0V,500mA

z Battery:650mA,BL‐5B(Rechargeablelithium‐ionbattery)



Thetalkandstandbytimesmay vary whenusedwithdifferentmobilephonesorothercompatibleBluetooth

devices,usagesettings,usagestylesandenvironments.



FormoreinformationandFAQ,pleaserefertosupport.avantree.comorcontactusat[email protected].





FCCID:

WJ5‐BTCK‐10BP

Z‐PKMN‐CK10BP‐0000

Avantree 10BP User manual

Brand: Avantree

Model: 10BP

Category: Mobile headsets

Type: User manual

Download PDF

report

Avantree 10BP User manual

Avantree 10BP User manual

Related papers

Other documents