Aedrox Z-Cam E1 User manual

Brand
Aedrox
Model
Z-Cam E1
Type
User manual

Aedrox Z-Cam E1 analog video interface enables you to output analog video signal from your Z-Cam E1 camera. It's a plug-and-play device that doesn't require an external power source. Simply connect it to the I/O port of your camera, power on the camera, and activate the CVBS output in the camera's menu. You can then use the interface to connect your camera to an external monitor or other video device. The interface also features two solder pads for connecting wires or cables, allowing you to customize the output to your specific needs.

Aedrox Z-Cam E1 analog video interface enables you to output analog video signal from your Z-Cam E1 camera. It's a plug-and-play device that doesn't require an external power source. Simply connect it to the I/O port of your camera, power on the camera, and activate the CVBS output in the camera's menu. You can then use the interface to connect your camera to an external monitor or other video device. The interface also features two solder pads for connecting wires or cables, allowing you to customize the output to your specific needs.

V1.02017EN
!
www.aedrox.com
1
USER MANUAL
AV Interface
For Z-Cam
V1.02017EN
Thank you for choosing an Aedrox accessory for your Z-Cam E1!
The Z-Cam E1 AV interface is the perfect tool to get analog video signal from E1 camera
Product page : http://www.aedrox.com/z-cam-e1-analog-video-interface/
!
www.aedrox.com
2
CAUTION
Aedrox® - Quality first"
Every single product is tested and checked before being packed and shipped
V1.02017EN
HOW IT WORKS ?
Z-Cam E1 AV interface is a plug and play device. It use the power provided by the camera to
works. Do never connect an external power source on E1-AV interface!
The AV interface is automatically detected at camera startup.
HOW TO USE ?
*Notice : The AV-Interface must be connected before powering on the camera, E1 does not
support hot-plug.
-1). Gently plug AV-Interface in the I/O port of your Z-Cam E1. Take care to insert it straight. Avoid
making lateral movements to prevent camera or any Av-Interface connector damage.
www.aedrox.com
3
V1.02017EN
- 2). Power ON the Z-Cam E1 camera.
- 3). Press ‘Menu’ button and enter E1 camera menu. "
- Go to ‘Settings’ > press ‘Fn’ button to validate"
- Go to ‘Setup Menu’ > press ‘Fn’ button to validate"
- Go to ‘CVBS output’ > press ‘Fn’ button to enter"
- Activate the CVBS output
www.aedrox.com
4
V1.02017EN
Soldering
Depending on your use, you will have to solder wires/cable corresponding to the characteristics
of the device on which you want to display the camera stream.
The two solder pads (video & GND) are easily identifiable.
*CAUTION : Over-heating the interface can damage the PCB or components.
Tips & Tricks :
Description
How to solve
E1 back LCD screen is black
This is normal when the CVBS output is activated because the
video stream is sent to the AV interface. To get the image back on
the camera LCD, power off the E1, unplug the AV interface &
power On the E1 again
I no longer have the video stream
with AV Interface
Each time you use the E1 without the AV interface, the CVBS
output will automatically turn off. Just power cycle the camera with
the interface plugged in, and re-activate ‘CVBS out’ in the menu
The video stream is frozen on my
external monitor
This occurs when the E1 is not used and switches to standby
mode. To wake up the monitor, take a picture or start/stop a video."
To avoid this, you can disable the ‘Auto off panel’ (Settings > Setup
Menu > Auto off panel > Set to : Manual)
www.aedrox.com
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Aedrox Z-Cam E1 User manual

Brand
Aedrox
Model
Z-Cam E1
Type
User manual

Aedrox Z-Cam E1 analog video interface enables you to output analog video signal from your Z-Cam E1 camera. It's a plug-and-play device that doesn't require an external power source. Simply connect it to the I/O port of your camera, power on the camera, and activate the CVBS output in the camera's menu. You can then use the interface to connect your camera to an external monitor or other video device. The interface also features two solder pads for connecting wires or cables, allowing you to customize the output to your specific needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents