3M Cold Shrink QT-II Outdoor Termination Kit 7665-S-HSG-8, 5-35 kV, Insulation OD 1.05-1.80 in, 1/kit, Cold Shrink QT-II Outdoor Termination Kit 7655-S-HSG-4-MB5, CN, JCN Cable, 5-25/28 kV, Insulation OD 1.05-1.80 in, 1 /kit, Cold Shrink QT-II Outdoor Termination Kit 7656-S-HSG-4, 5-25/28 kV, Insulation OD 1.53-2.32 in, 1/kit, Cold Shrink QT-II Outdoor Termination Kit 7664-S-HSG-8, 5-35 kV, Insulation OD 0.83-1.53 in, 1/kit, Cold Shrink QT-III Silicone Rubber Termination 7663-S-HSG-8-1/0 (High-Amp), LC, Tape Shield, Wire-Over-Tape Shield Cable, 5-35 kV, 0.72-1.29 in (18,3-32,8 mm) Cable Insul. O.D., 1 termination/kit User guide

  • Hello! I am an AI chatbot trained to assist you with the 3M Cold Shrink QT-II Outdoor Termination Kit 7665-S-HSG-8, 5-35 kV, Insulation OD 1.05-1.80 in, 1/kit User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
225
3
T e r
erminations
Nonshielded (Dry) Cable, Nonshielded (Wet or Dry) Cable
Specifications and Ordering Information for Silicone R ubber Termination K its 5610-A Series
for 5 and 8 kV
C a ble
P a rt U P C C o n d uc t o r I n s u l a t i o n T e r m in a t io n s C a s e
N u m be r (054007-) R a ng e O . D. R a ng e pe r K it Q t y .
5610A Series Silicone Rubber Termination Kits
5 kV and 8 kV
5611A 49549 8-4 AWG 0.31 - 0.72" 3 1
(10-16 mm
2
) (7,9-18,3 mm)
5612A 49550 2-2/0 AWG 0.44 - 0.95" 3 1
(35-60 mm
2
) (11,2-24,1 mm)
5613A 49551 3/0 AWG-300 kcmil 0.56 - 1.18" 3 1
(95-150 mm
2
) (14,2-30,0 mm)
5614A 49552 350-1000 kcmil 0.95 - 1.94" 3 1
(180-500 mm
2
) (24,1-49,3 mm)
Note: Because of the various factors which affect cable primary insulation O.D. and cable jacket O.D. (e.g., type of conductor, insulation thickness), the cable sizes in the chart above
are guidelines. Confirm that cable insulation O.D. fits range specified above for the term ination.
/