Miller WATERMATE 1 Owner's manual

Miller
Brand
Miller
Model
WATERMATE 1
Category
Welding System
Type
Owner's manual

This manual is also suitable for

Miller JJ520016 is a compact and lightweight welding accessory designed to regulate the flow of coolant in a welding system. It is suitable for use with various Miller welding power sources and features a non-adjustable bypass valve for pressure relief in case of a closed discharge line. The bypass valve is factory-set at 50 psi (345 kPa). The Watermate 1 and Watermate 2 models have a coolant tank capacity of 7 gallons (23 kg). These units can be used in various industrial and commercial applications where controlled coolant circulation is required for welding operations.

Miller JJ520016 is a compact and lightweight welding accessory designed to regulate the flow of coolant in a welding system. It is suitable for use with various Miller welding power sources and features a non-adjustable bypass valve for pressure relief in case of a closed discharge line. The bypass valve is factory-set at 50 psi (345 kPa). The Watermate 1 and Watermate 2 models have a coolant tank capacity of 7 gallons (23 kg). These units can be used in various industrial and commercial applications where controlled coolant circulation is required for welding operations.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Miller WATERMATE 1 Owner's manual

Miller
Brand
Miller
Model
WATERMATE 1
Category
Welding System
Type
Owner's manual
This manual is also suitable for

Miller JJ520016 is a compact and lightweight welding accessory designed to regulate the flow of coolant in a welding system. It is suitable for use with various Miller welding power sources and features a non-adjustable bypass valve for pressure relief in case of a closed discharge line. The bypass valve is factory-set at 50 psi (345 kPa). The Watermate 1 and Watermate 2 models have a coolant tank capacity of 7 gallons (23 kg). These units can be used in various industrial and commercial applications where controlled coolant circulation is required for welding operations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents