Land Pride 800 User manual

Read the Operator’s Manual entirely. When you see this symbol,

the subsequent instructions and warnings are serious - follow

without exception. Your life and the lives of others depend on it!

Cover photo may show optional equipment not supplied

with standard unit.

For an Operator’s Manual and Decal Kit in another

language, please see your Land Pride dealer.

Printed 2018-06-12

Table of Contents

313-519M

Operator's Manual

Compact Drill

800

32600

Machine Identification

Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new

manual.

If you or the dealer have added options not originally ordered with the machine, or removed options that were originally

ordered, the weights and measurements are no longer accurate for your machine. Update the record by adding the

machine weight and measurements with the option(s) weight and measurements.

Dealer Contact Information

Model Number

Serial Number

Machine Height

Machine Length

Machine Width

Machine Weight

Year of Construction

Delivery Date

First Operation

Accessories

Name:

Street:

City/State:

Telephone:

Email:

Dealer’s Customer

No.:

WARNING:

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Table of Contents Table of Contents

2018-06-12 800 313-519M

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this

manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained

herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and

may not reflect the product in the future.

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

Section 1: Table of Contents . . . . . . . . . . . . . . . . . . .iii

Section 2: Important Safety Information. . . . . . . . . . 1

Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Section 3: Introduction . . . . . . . . . . . . . . . . . . . . . . . . 9

Description of Unit . . . . . . . . . . . . . . . . . . . . . . . . . 9

Intended Usage . . . . . . . . . . . . . . . . . . . . . . . . 9

Models Covered. . . . . . . . . . . . . . . . . . . . . . . . 9

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 9

Document Family . . . . . . . . . . . . . . . . . . . . . . 10

Owner Assistance. . . . . . . . . . . . . . . . . . . . . . . . . 11

Product Support . . . . . . . . . . . . . . . . . . . . . . . 11

Section 4: Preparation and Setup . . . . . . . . . . . . . . 12

Pre-Setup Checklist . . . . . . . . . . . . . . . . . . . . . . . 12

Hitch Preparation . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting the Drill Hitch . . . . . . . . . . . . . . . . . 12

Hitching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Electrical Connections . . . . . . . . . . . . . . . . . . . . . 13

Hydraulic Hose Hookup . . . . . . . . . . . . . . . . . . . . 14

Leveling the Drill . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Section 5: Operating Instructions . . . . . . . . . . . . . . 15

General Description . . . . . . . . . . . . . . . . . . . . . . . 15

Pre-Start Checklist . . . . . . . . . . . . . . . . . . . . . . . . 15

Raising Openers for Transport . . . . . . . . . . . . . . . 16

Opener Pivot Stop . . . . . . . . . . . . . . . . . . . . . 16

Lock-Out Hub. . . . . . . . . . . . . . . . . . . . . . . . . 17

Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Weights for Tractor Requirements . . . . . . . . . 18

Transport Checklist . . . . . . . . . . . . . . . . . . . . 18

Opener Operation. . . . . . . . . . . . . . . . . . . . . . . . . 19

Lowering and Raising Openers. . . . . . . . . . . . . . . 19

Loading Materials . . . . . . . . . . . . . . . . . . . . . . . . . 20

Setting Materials Rates. . . . . . . . . . . . . . . . . . . . . 21

Initial Seeding Depth . . . . . . . . . . . . . . . . . . . 21

Acremeter Operation . . . . . . . . . . . . . . . . . . . . . . 22

Normal Operating Sequence . . . . . . . . . . . . . 22

Field Operations . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Final Field Checklist. . . . . . . . . . . . . . . . . . . . 23

Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Tongue Elevation. . . . . . . . . . . . . . . . . . . . . . 25

Section 6: Adjustments . . . . . . . . . . . . . . . . . . . . . . 27

Opener Frame Down-Force . . . . . . . . . . . . . . . . . 29

Spring Down Pressure–All Openers . . . . . . . 29

Row Unit Adjustments . . . . . . . . . . . . . . . . . . . . . 30

Opener Height . . . . . . . . . . . . . . . . . . . . . . . . 31

Row Unit Down Pressure (Spring). . . . . . . . . 31

Disc Blade Adjustments. . . . . . . . . . . . . . . . . 32

Disc Scraper Adjustments . . . . . . . . . . . . . . . 32

Seed Firmer Adjustments . . . . . . . . . . . . . . . 33

Fertilizer Tube Adjustment. . . . . . . . . . . . . . . 34

Opener Depth (Press Wheel Height). . . . . . . 34

Section 7: Troubleshooting . . . . . . . . . . . . . . . . . . . 35

Section 8: Maintenance and Lubrication . . . . . . . . 38

Bleeding Hydraulics . . . . . . . . . . . . . . . . . . . . . . . 39

Bleeding Opener Lift Hydraulics . . . . . . . . . . 40

Chain Maintenance . . . . . . . . . . . . . . . . . . . . . . . 41

Materials Clean-Out . . . . . . . . . . . . . . . . . . . . . . . 42

Main Box Clean-Out. . . . . . . . . . . . . . . . . . . . 42

Fertilizer Box Clean-Out. . . . . . . . . . . . . . . . . 42

Small Seeds Box Clean-Out . . . . . . . . . . . . . 42

Seed Flap Replacement. . . . . . . . . . . . . . . . . . . . 43

Current Drill Model Flap. . . . . . . . . . . . . . . . . 43

Older Drill Model Flap . . . . . . . . . . . . . . . . . . 43

Lubrication and Scheduled Maintenance . . . . . . . 44

Section 9: Options . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Section 10: Appendix A - Reference Information . 55

Specifications and Capacities. . . . . . . . . . . . . . . . 56

Tire Inflation Chart . . . . . . . . . . . . . . . . . . . . . . . . 57

Drill Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Torque Values Chart . . . . . . . . . . . . . . . . . . . . . . 59

Chain Routing. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Hydraulic Diagram . . . . . . . . . . . . . . . . . . . . . . . . 63

Section 11: Appendix B - Pre-Delivery . . . . . . . . . . 64

Section 12: Appendix C - Option Installation. . . . . 66

Carbide Disc Scraper Installation. . . . . . . . . . . . . 66

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Dealer QR Locator

The QR code on the left will link

you to available dealers for

Land Pride products. Refer to

Parts Manual QR Locator on

this page for detailed

instructions.

Table of Contents Continued Table of Contents

2018-06-12800 313-519M

Parts Manual QR Locator

The QR (Quick Reference) code on the cover

and to the left will take you to the Parts

Manual for this equipment. Download the

appropriate App on your smart phone, open

the App, point your phone on the QR code and

take a picture.

See previous page for Table of Contents

Important Safety Information Table of Contents

2018-06-12 800 3132-519M 1

Important Safety Information

Look for Safety Symbol

The SAFETY ALERT SYMBOL indicates there is a

potential hazard to personal safety involved and extra

safety precaution must be taken. When you see this

symbol, be alert and carefully read the message that

follows it. In addition to design and configuration of

equipment, hazard control and accident prevention are

dependent upon the awareness, concern, prudence and

proper training of personnel involved in the operation,

transport, maintenance and storage of equipment.

Be Aware of Signal Words

Signal words designate a degree or level of hazard

seriousness.

DANGER, and the color Safety Red, indicate an

imminent hazard which, if not avoided, will result in death

or serious injury. This signal word is limited to the most

extreme situations, typically for machine components

that, for functional purposes, cannot be guarded.

WARNING, and the color Safety Orange, indicate a

potential hazard which, if not avoided, could result in

death or serious injury, and includes hazards that are

exposed when guards are removed. It may also be used

to alert against unsafe practices.

CAUTION, and the color Safety Yellow, indicate a

potential hazard which, if not avoided, may result in

minor or moderate injury. It may also be used to alert

against unsafe practices.

Prepare for Emergencies

 Be prepared if a fire starts

 Keep a first aid kit and fire extinguisher handy.

 Keep emergency numbers for doctor, ambulance, hospital

and fire department near phone.

Be Familiar with Safety Decals

 Read and understand “Safety Decals” on page 5,

thoroughly.

 Read all instructions noted on the decals.

 Keep decals clean. Replace damaged, faded and illegible

decals.

Important Safety Information Table of Contents

800 3132-519M 2018-06-122

Wear Protective Equipment

 Wear protective clothing and equipment.

 Wear clothing and equipment appropriate for the job.

Avoid loose-fitting clothing.

 Because prolonged exposure to loud noise can cause

hearing impairment or hearing loss, wear suitable

hearing protection such as earmuffs or earplugs.

 Because operating equipment safely requires your full

attention, avoid wearing entertainment headphones while

operating machinery.

Handle Chemicals Properly

Agricultural chemicals can be dangerous. Improper use

can seriously injure persons, animals, plants, soil and

property.

 Do not use liquid seed treatments with the 800.

 Read and follow chemical manufacturer’s instructions.

 Wear protective clothing.

 Handle all chemicals with care.

 Avoid inhaling smoke from any type of chemical fire.

 Never drain, rinse or wash dispensers within 100 feet

(30m) of a freshwater source, nor at a car wash.

 Store or dispose of unused chemicals as specified by

chemical manufacturer.

 Dispose of empty chemical containers properly. Laws

generally require power rinsing or rinsing three times,

followed by perforation of the container to prevent re-use.

Avoid High Pressure Fluids

Escaping fluid under pressure can penetrate the skin,

causing serious injury.

 Avoid the hazard by relieving pressure before

disconnecting hydraulic lines.

 Use a piece of paper or cardboard, NOT BODY PARTS, to

check for suspected leaks.

 Wear protective gloves and safety glasses or goggles when

working with hydraulic systems.

 If an accident occurs, seek immediate medical attention

from a physician familiar with this type of injury.

Important Safety Information Table of Contents

2018-06-12 800 3132-519M 3

Use A Safety Chain

 Use a safety chain to help control drawn machinery

should it separate from tractor drawbar.

 Use a chain with a strength rating equal to or greater than

the gross weight of towed machinery.

 Attach chain to tractor drawbar support or other specified

anchor location. Allow only enough slack in chain to

permit turning.

 Replace chain if any links or end fittings are broken,

stretched or damaged.

 Do not use safety chain for towing.

Keep Riders Off Machinery

Riders obstruct the operator’s view. Riders could be

struck by foreign objects or thrown from the machine.

 Never allow children to operate equipment.

 Keep all bystanders away from machine during operation.

Use Safety Lights and Devices

Slow-moving tractors and towed implements can create

a hazard when driven on public roads. They are difficult

to see, especially at night.

 Use flashing warning lights and turn signals whenever

driving on public roads.

 Use lights and devices provided with implement.

Transport Machinery Safely

Maximum transport speed for implement is 20 mph

(30 kph). Some rough terrains require a slower speed.

Sudden braking can cause a towed load to swerve and

upset.

 Ensure towing vehicle weighs at least

2

/3 (67%) of gross

implement weight.

 Do not exceed 20 mph (30 kph). Never travel at a speed

which does not allow adequate control of steering and

stopping. Reduce speed if drill is not equipped with

brakes.

 Comply with state and local laws.

 Carry reflectors or flags to mark drill in case of

breakdown on the road.

Shutdown and Storage

 Park on level ground.

 Unhitch and store the drill in an area where children

normally do not play.

Important Safety Information Table of Contents

800 3132-519M 2018-06-124

Tire Safety

Tire changing can be dangerous and should be

performed by trained personnel using correct tools and

equipment.

 When inflating tires, use a clip-on chuck and extension

hose long enough for you to stand to one side–not in front

of or over tire assembly. Use a safety cage if available.

 When removing and installing wheels, use wheel-handling

equipment adequate for weight involved.

Practice Safe Maintenance

 Understand procedure before doing work. Use proper

tools and equipment. Refer to this manual.

 Work in a clean, dry area.

 Lower the drill, put tractor in park, turn off engine, and

remove key before performing maintenance. If work must

be performed with implement raised, use blocks or

jackstands rated for the drill weight.

 Make sure all moving parts have stopped and all system

pressure is relieved.

 Allow drill to cool completely.

 Disconnect battery ground cable (-) before servicing or

adjusting electrical systems.

 Welding: Disconnect battery ground. Avoid fumes from

heated paint.

 Inspect all parts. Make sure parts are in good condition

and installed properly.

 Remove buildup of grease, oil or debris.

 Remove all tools and unused parts from drill before

operation.

Safety At All Times

Thoroughly read and understand the instructions in this

manual before operation. Read all instructions noted on

the safety decals.

 Be familiar with all drill functions.

 Operate machinery from the driver’s seat only.

 Do not leave drill unattended with tractor engine running.

 Do not stand between the moving tractor and drill during

hitching.

 Keep hands, feet and clothing away from power-driven

parts.

 Wear snug-fitting clothing to avoid entanglement with

moving parts.

 Make sure all persons are clear of working area.

Important Safety Information Table of Contents

2018-06-12 800 3132-519M 5

Safety Decals

Safety Reflectors and Decals

Your implement comes equipped with all lights, safety

reflectors and decals in place. They were designed to

help you safely operate your implement.

Read and follow decal directions.

Keep lights in operating condition.

Keep all safety decals clean and legible.

Replace all damaged or missing decals. Order new decals

from your Land Pride dealer. Refer to this section for

proper decal placement.

When ordering new parts or components, also request

corresponding safety decals.

To install new decals:

1. Clean the area on which the decal is to be placed.

2. Peel backing from decal. Press firmly on surface,

being careful not to cause air bubbles under decal.

Reflector: Slow Moving Vehicle (SMV)

At center of walkboard;

1 total

See “Transport” on page 17.

Reflectors: Red

On rear face of walkboard, left and right ends, outside

daytime reflectors;

2 total

See “Transport” on page 17.

Reflectors: Amber

On side frames at walkboard ends, and

on front face of front tool bar at left & right ends;

4 total

See “Transport” on page 17.

818-055C

28055

838-266C

32677

838-265C

32677

Important Safety Information Table of Contents

800 3132-519M 2018-06-126

Reflectors: Daytime

On rear face of walkboard, left and right ends, inside red

reflectors;

2 total

See “Transport” on page 17.

Danger: Moving Chain (Option)

On chain guard of Small Seeds option;

1 total

Danger: Cannot Read English

On left tongue tube near hitch;

1 total

This decal advises Spanish speakers to seek assistance

from someone who reads English.

Warning: Negative Tongue Weight

On left side of hitch;

1 total

See “Hitching” on page 12.

838-267C

32677

818-518C

32610

818-518C REV. B

DO NOT operate with enclosure missing

CAUTION

MOVING CHAIN HAZARD

To prevent serious injury from moving chain:

818-557C

32677

Si No Lee Ingles, Pida Ayuda a Alugien Que Si Lo Lea Para

Que le Traduzca las Medidas de Seguridad.

818-557C

PELIGRO

818-019C

32677

NEGATIVE TONGUE WEIGHT

HAZARD

Negative tongue weight can cause immediate

elevation of tongue when unhitching implement

To prevent serious injury or death:

Always be certain implement is hitched securely

to tractor drawbar before reaising.

Lower implement BEFORE unhitching.

818-019C Rev. D

WARNING

Important Safety Information Table of Contents

2018-06-12 800 3132-519M 7

Warning: Speed

On left tongue tube near hitch;

1 total

See “Transport” on page 17.

Warning: High Pressure Fluid

On left tongue tube near hitch;

1 total

See “Hitching” on page 12.

Warning: Moving Parts

On front face of gearbox cover;

1 total

Warning: Clevis Adjustment

On tongue cross-tube near turnbuckle;

2 total

See “Leveling the Drill” on page 13.

818-188C

32677

818-188C Rev. C

Do Not exceed 20 mph maximum transport

speed. Loss of vehicle control and/or machine

can result.

To Prevent Serious Injury or Death:

EXCESSIVE SPEED HAZARD

WARNING

838-094C

32677

818-860C

32677

838-406C

32677

WARNING

Important Safety Information Table of Contents

800 3132-519M 2018-06-128

Caution: Tires Not A Step

On side frames above tires;

2 total

See Cautions on page 18.

Caution: General

On left tongue tube near hitch;

1 total

See “Important Safety Information” on page 1.

Caution: Tire Pressure and Torque

On rim of each end wheel;

2 total

Note: On older drills with 838-258C decals, request

replacement decals from your dealer.

Caution: Falling Hazard

On side frames near walkboard;

2 total

818-398C

32677

818-719C

32677

WARNING:

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

To prevent injury or death:

Read and understand Operator’s Manual before using.

Lower implement, stop tractor engine, set park brake and remove ignition

Do now allow riders.

Keep others away during operation.

Safely support and secure implement before repairs are made.

key before servicing, adjusting, repairing or unplugging.

CAUTION

818-719C

848-021C

32677

CAUTION

To Avoid Injury or Machine Damage from Improper Tire

Inflation or Torquing of Wheel Bolts:

Maximum inflation pressure for tires is 60 psi.

Torque wheel bolts to 85 lb-ft.

•

848-021C REV. B

838-258C

32677

Introduction Table of Contents

2018-06-12 800 3132-519M 9

Introduction

Land Pride welcomes you to its growing family of new

product owners. Your 8-Foot End Wheel Drill has been

designed with care and built by skilled workers using

quality materials. Proper setup, maintenance, and safe

operating practices will help you get years of satisfactory

use from the machine.

Description of Unit

The 800 is a towed seeding implement. This drill has a

working width of 7.5 feet (2.3m). The drill has straight

arm, double disc 00 Series openers. The opener discs

make a seed bed, and seed tubes mounted between the

discs place seed in the furrow. Press wheels following

the opener discs close the furrow and gauge opener

seeding depth. A T-handle on the opener body makes

seeding depth adjustments.

The metering system is driven from the left end wheel.

Seeding rates are adjustable with rate adjustment

handles and a Drive Type gearbox for the main seed box.

Intended Usage

Use this implement to seed production-agriculture crops

in conventional or minimum tillage applications.

Models Covered

This manual applies to Land Pride drill models:

Standard 800 Models have a main seed box. Fertilizer

and/or Smalls Seeds capability may be added.

Using This Manual

This manual familiarizes you with safety, assembly, oper-

ation, adjustments, troubleshooting, and maintenance.

Read this manual and follow the recommendations to

help ensure safe and efficient operation.

The information in this manual is current at printing.

Some parts may change to assure top performance.

Document Family

Identifies an Economic (not a Safety) Risk:

NOTICE provides a crucial point of information related to the

current topic. Read and follow the instructions to avoid damage

to equipment and ensure desired field results.

Note: This form sets off useful information related to the

current topic, or forestalls possible

misunderstanding.

Right-hand and left-hand as used in

this manual are determined by facing

the direction the machine will travel

while in use unless otherwise stated.

An orientation rose in some line art

illustrations shows the directions of:

Up, Back, Left, Down, Front, Right.

Figure 1

800 End Wheel Drill

32588

800 15-row 6-inch (15.2 cm)

800 12-row 7.5-inch (19.1 cm)

313-519M Operator’s Manual (this document)

313-517P 800 Parts Manual

313-522B Seed Rate Manual

U

D

F

B

L

R

Introduction Table of Contents

800 3132-519M 2018-06-1210

Owner Assistance

If you need customer service or repair parts, contact a

Land Pride dealer. They have trained personnel, repair

parts and equipment specially designed for Land Pride

products.

Refer to Figure 2

Your machine’s parts were specially designed and

should only be replaced with Land Pride parts. Always

use the serial and model number when ordering parts

from your Land Pride dealer. The serial-number plate is

located on the left side of the drill frame below the front of

the seed box.

Record your drill model and serial number and at the

bottom of the Warranty page (inside back cover) here for

quick reference:

Model Number:__________________________

Serial Number: __________________________

Your Land Pride dealer wants you to be satisfied with

your new machine. If you do not understand any part of

this manual or are not satisfied with the service received,

please take the following actions.

1. Discuss the matter with your dealership service

manager. Make sure they are aware of any problems

so they can assist you.

2. If you are still unsatisfied, seek out the owner or gen-

eral manager of the dealership.

For further assistance write to:

Product Support

Land Pride, Service Department

1525 East North Street

PO Box 5060

Salina, KS 67402-5060

E-mail address:

lpservicedept@landpride.com

Figure 2

Serial Number Location

32591

Preparation and Setup Table of Contents

2018-06-12 800 3132-519M 11

Preparation and Setup

This section helps you prepare your tractor and drill for

use. Before using the drill in the field, you must hitch the

drill to a suitable tractor and also setup the drill.

Pre-Setup Checklist

1. Read and understand “Important Safety

Information” on page 1.

2. On a new drill, verify that Pre-Delivery items have

been completed (page 60).

3. Check that all working parts are moving freely, bolts

are tight, and cotter pins are spread.

4. De-grease cylinder rods and reconnect hoses if

these steps taken at previous storage.

5. Check that all grease fittings are in place and

lubricated. See “Lubrication and Scheduled

Maintenance” on page 43.

6. Check that all safety decals and reflectors are

correctly located and legible. Replace if damaged.

See “Safety Decals” on page 5.

7. Inflate tires to pressure recommended and tighten

wheel bolts as specified. See “Appendix A -

Reference Information” on page 53.

Hitch Preparation

Adjusting the Drill Hitch

Adjust the drill hitch to match tractor drawbar height so

your drill frame runs level in the field.

Crushing Hazard:

You may be severely injured or killed by being crushed

between the tractor and drill. Do not stand or place any part of

your body between machines being hitched. Stop tractor

engine and set parking brake before installing hitch pin.

Refer to Figure 3

1. Back your tractor up as if hitching to the drill. Park

the tractor several yards from the drill. Set the brake

and turn off the tractor.

2. Crank the drill jack until the top of the drill box is par-

allel with the ground. Compare the height of the drill

hitch to your tractor drawbar.

3. If necessary, adjust the drill hitch to match your trac-

tor drawbar.To adjust the hitch, remove the

3



4

in nuts,

bolts and washers. Reposition and re-install the

clevis hitch.

Negative Tongue Weight Hazard:

This drill can have positive and negative tongue weight, which

can work the hitch pin loose during transport. To avoid serious

injury or death due to a road accident, always check that the

drill is hitched before raising the openers. Lower the openers

before unhitching.

NEGATIVE TONGUE WEIGHT

HAZARD

Negative tongue weight can cause immediate

elevation of tongue when unhitching implement

To prevent serious injury or death:

Always be certain implement is hitched securely

to tractor drawbar before reaising.

Lower implement BEFORE unhitching.

818-019C Rev. D

WARNING

Figure 3

Clevis Hitch Positions

18544

15

9

/32 in. (38.8 cm)

18

9

/32 in. (46.4 cm)

19

17

/32 in. (49.6 cm)

22

17

/32 in. (57.2 cm)

Preparation and Setup Table of Contents

800 3132-519M 2018-06-1212

Hitching

1. Slowly back the tractor toward the drill. When within

a few yards of the drill, stop and park the tractor.

Crushing Hazard:

You may be severely injured or killed by being crushed

between the tractor and drill. Do not stand or place any part of

your body between machines being hitched. Stop tractor

engine and set park brake before installing hitch pin.

2. Crank the drill jack until the drill hitch matches the

tractor drawbar height.

3. Continue backing the tractor until the drawbar and

hitch are aligned. Stop and park the tractor. Adjust

the drill-tongue height until you can install the hitch

pin.

4. Install a hitch pin. Install a retaining clip to keep the

pin from working out of the hitch.

5. Secure the drill safety chain to an anchor on the

tractor capable of pulling the drill.

Refer to Figure 4

6. Use crank to raise jack foot. Remove pin and jack.

Store jack on top of tongue.

Electrical Connections

Refer to Figure 5

7. Plug drill electrical lead into tractor seven-pin

connector. If your tractor is not equipped with a

seven-pin connector, contact your dealer for

installation.

Figure 4

Jack on Storage Stob

32600

Negative Tongue Weight Hazard:

This drill can have positive and negative tongue weight, which

can work the hitch pin loose during transport. To avoid serious

injury or death due to a road accident, always check that the

drill is hitched before raising the openers. Lower the openers

before unhitching.

Figure 5

Lighting Connector

26467

Preparation and Setup Table of Contents

2018-06-12 800 3132-519M 13

Hydraulic Hose Hookup

Only trained personnel should work on system hydraulics!

Escaping fluid under pressure can have sufficient pressure to

penetrate the skin, causing serious injury. Avoid the hazard by

relieving pressure before disconnecting hydraulic lines. Use a

piece of paper or cardboard, NOT BODY PARTS, to check for

leaks. Wear protective gloves and safety glasses or goggles

when working with hydraulic systems. If an accident occurs,

seek immediate medical attention from a physician familiar

with this type of injury.

Refer to Figure 6

Hydraulic hoses have directional handles and are color

coded to help you hookup hoses to your tractor outlets.

Hoses that go to the same remote valve pair are marked

with the same color.

To distinguish hoses on the same hydraulic circuit, refer

to the symbols on the handles. Hose under

extended-cylinder symbol feeds cylinder base ends.

Hose under retracted-cylinder symbol feeds cylinder rod

ends.

8. Set tractor circuit for opener lift to float.

9. Plug cylinder base and rod end hoses into circuit

extend and retract ports.

Leveling the Drill

Use hitch turnbuckle to level drill.

Refer to Figure 7

1. Loosen jam nuts on hitch turnbuckle.

2. Turn turnbuckle to shorten or lengthen until top of

drill frame is parallel to the ground, being careful not

to extend clevises beyond turnbuckle.

3. Retighten jam nuts on turnbuckle.

Color Hydraulic Function

Blue Transport Lift Cylinders

Figure 6

Hose Handles

31733

Figure 7

Leveling 800

32595

1

WARNING

Operating Instructions Table of Contents

800 3132-519M 2018-06-1214

Operating Instructions

This section covers general operating procedures. It

assumes that setup items have been completed.

Experience, machine familiarity and the following

information will lead to efficient operation and good

working habits. Always operate farm machinery with

safety in mind.

General Description

Field operations are controlled by a tractor cab hydraulic

lever. When openers are lowered, a mechanical clutch

engages, and the left end wheel drives the seed meter

shaft.

Seed and fertilizer meters operate at a rate proportional

to ground speed, as set by sprockets and/or rate handle,

based on the rate charts, and calibration.

Seeding depth and furrow coverage are controlled by drill

down pressure and row unit setup.

Pre-Start Checklist

High Pressure Fluid Hazard:

Escaping fluid under pressure can penetrate the skin causing

serious injury. Avoid the hazard by relieving pressure before

disconnecting hydraulic lines. Use a piece of paper or

cardboard, NOT BODY PARTS, to check for suspected leaks.

Wear protective gloves and safety glasses or goggles when

working with hydraulic systems. If an accident occurs, seek

immediate medical attention from a physician familiar with

this type of injury.

Lubricate the drill as indicated under Lubrication,

“Maintenance and Lubrication” on page 37.

Check the tires for proper inflation according to

“Tire Inflation Chart” on page 53.

Check for worn or damaged parts and leaks.

Repair or replace before going to the field.

Check all nuts, bolts and screws. Tighten bolts as

specified on “Torque Values Chart” on page 55.

Operating Instructions Table of Contents

2018-06-12 800 3132-519M 15

Raising Openers for Transport

The opener sub-frame is on a dedicated hydraulic circuit.

The openers raise and lower as a group, controlled from

a tractor cab lever.

The following instructions presume that the openers are

lowered, and need to be raised for transport.

Loss of Control Hazard:

Failure of the hydraulic cylinder during transport causes the

openers to drop suddenly, which could lead to serious road

accidents, injury or death. To prevent an accident, always

install the pivot-stop pin in the transport-lock position before

transporting the drill.

Opener Pivot Stop

1. Hitch the drill to a suitable tractor. See “Hitching” on

page 12.

Negative Tongue Weight Hazard:

Raising openers on an unhitched drill causes the drill tongue

to rise suddenly, which could cause serious injury or death. Be

certain that drill is hitched securely to your tractor drawbar

and the safety chain is securely attached to tractor before

raising openers.

2. Retract the opener lift cylinder to fully raise the

openers. Put the tractor circuit control in Neutral to

hold cylinder position.

Refer to Figure 8

3. Note which lettered (A-E) down-pressure pin hole

was previously in use. This is likely to be the same

hole used for the next planting.

4. Remove the pin from that down-pressure adjustment

hole.

5. Insert and secure the pin in its transport lock

position .

Figure 8

Openers Locked for Transport

32595

2

3

1

Note: If you are not transporting on the drill’s own

wheels, the hitch tongue can be elevated to

vertical to reduce the length of the drill. See

“Storage” on page 23 for folding instructions.

1

2

3

Operating Instructions Table of Contents

800 3132-519M 2018-06-1216

Lock-Out Hub

Refer to Figure 9 and Figure 10

6. Disengage the lock-out hub on the left end-wheel.

Pull out on the cross-pin, lifting it out of the deeper

detents. Rotate it 90 degrees and release it into the

shallower detents. The drive is immediately

disengaged.

7. To re-engage the lock-out hub for planting, pull out

on the cross pin, rotate is 90 degrees, and release

it into the deeper detents.

Note: The cross-pin may not fully seat when released

into the deep detents. It self-seats during the next

rotation of the wheel.

Figure 9

Wheel Hub Locked-Out

32599

{fix}

Figure 10

Lock-Out Hub Pin

818-583C

Page is loading ...

Land Pride 800 User manual

This manual is also suitable for

Land Pride 800 User manual

Related papers

Other documents