Sena TUFFTALK LITE Quick start guide

Type
Quick start guide

Sena TUFFTALK LITE is an industrial Bluetooth communication system that allows you to pair with mobile devices, make and receive phone calls, listen to music, and use the voice dialer. It also enables intercom conversations with other headsets and has a built-in FM radio with preset stations.

Sena TUFFTALK LITE is an industrial Bluetooth communication system that allows you to pair with mobile devices, make and receive phone calls, listen to music, and use the voice dialer. It also enables intercom conversations with other headsets and has a built-in FM radio with preset stations.

PREPARATION
Knowing the Headset Layout
Status LED
(+) Button
DC Power
Charging &
Firmware
Upgrade Port
Microphone
Right Ear Cup
(-) Button
Center
Button
Replacing the Ear Pads of the Tutalk Lite
Use your ngers to remove the ear pads and insert the included ear pads.
Adjusting the Volume
OR
You will hear a beep when the volume
reaches the maximum or minimum
level.
Checking the Battery Level
Blinking
70~100%
Blinking
30~70%
Blinking
0~30%
Turn on the headset and check the battery level via the Status LED.
PAIRING
Pairing with Mobile Devices - Phone, Music
“Phone pairing”
Bluetooth
Bluetooth
Sena Tutalk Lite
“Your headset is paired”
Using Phone Features
After Pairing…
Answering Calls
Ending Calls Rejecting Calls
or
“Hello”
OR
Making Calls
Using the Phone Keypad Using the Voice Dialer
BASIC OPERATION
Operating the Buttons
OR
Tap the
button
Double tap the
button
Press and hold
the button for
5 seconds
Press the two
buttons at the
same time
Press one
of the two
buttons
Turning On/O the Headset
ON You will hear ascending
beeps.
“Hello”
OFF
You will hear descending
beeps.
“Goodbye”
Simultaneously press and hold the Center Button and the
(+) Button for 1 second to turn on or o the headset.
“High” 70~100%
“Medium” 30~70%
“Low 0~30%
Or, press and hold the Center Button and the (+) Button for 3 seconds
when the headset turns on. You will hear a voice prompt.
Charging the Battery
Charging
Fully charged
AC adapter
or
Using the Speed Dial
OR
You will hear a beep.
“Speed dial”
Voice Menu
• Last number redial
• Speed dial 1
• Speed dial 2
• Speed dial 3
• Cancel
Listening to Music
1
1
OR
After Pairing…
Playing or Pausing Music Tracking Forward or Backward
until you hear
a double beep
Press the
(+) Button or the
(-) Button for
1 second
Quick Start Guide
Industrial Bluetooth®
Communication System
Over-the-Head Earmu
Using the Intercom
After Pairing…
1
2
3
You can start or end a two-way intercom conversation with each
headset.
Using the Group Intercom
To Start To End
Group intercom
Group intercom terminated”
RADIO
Turning On/O the FM Radio
1
You will hear a double beep sound.
“FM on or “FM o
Seeking Stations
OR
Double tap the (+) Button or the (-) Button
Listening to Preset Stations
1
Saving or Deleting Stations
To Save To Delete
OR
Preset (#)”
(#)”
Save preset
(#)”
Delete preset
(#)”
SETTING
Method1) Using the headset
You will hear a double beep sound.
“Conguration menu”
Method2) Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings. For more information on downloading the Sena Device Manager,
please visit sena.com.
Method3) Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android
or iPhone from Google Play or App Store.
Refer to www.sena.com/headset-app/ for more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Settings to congure the headset settings.
18.MarMP0501609_1.0_EN_March2018
You can download the full version of the manual and view other
Sena products at the Sena website: www.sena.com.
INTERCOM
Pairing with Other Headsets
5 5
Headset A Headset B
“Intercom pairing
Follow the steps above to pair with two or more headsets.
TROUBLESHOOTING
Factory Reset
If you want to restore the Tutalk Lite to factory default settings, use the
Factory Reset in the conguration menu. The headset automatically
restores the default settings and turns o.
Fault Reset
If the Tutalk Lite is not working properly for any
reason, push the pin-hole reset button located below
the Center Button.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
  • Page 1 1
  • Page 2 2

Sena TUFFTALK LITE Quick start guide

Type
Quick start guide

Sena TUFFTALK LITE is an industrial Bluetooth communication system that allows you to pair with mobile devices, make and receive phone calls, listen to music, and use the voice dialer. It also enables intercom conversations with other headsets and has a built-in FM radio with preset stations.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI