B
C
D
J
A F
G
K
H
L
E
A. APRILIA STREET LEGAL SLIP-ON SILENCERS
BY AKRAPOVIC
Slip-on silencers developed in conjunction with
Akrapovic especially for the Tuono. Homologated
for road use and conformity to strict E3 noise and
emission standards. The titanium hexagonal bodies
terminate in a carbon fibre tail to give your Tuono an
even more aggressive look. These Akrapovic slip-
ons reduce your bike’s overall weight by 3.9 kg and
improve performance at medium-low engine speeds
around 5400 rpm, with a further improvement in
power output over 9000 rpm. Come complete with
a certificate of conformity, allowing you to circulate
freely on public roads. Maximum performance can
be achieved quickly and easily by removing the DB
killer.
B. FULLY ADJUSTABLE ÖHLINS STAINLESS
STEEL AND ÖHLINS ALUMINIUM REAR SHOCK
ABSORBER KITS
Specially designed for racing use. These fully
adjustable race tech shock absorbers allow you to
find exactly the right setup for any riding conditions.
The hydraulic damping system offers a wide range
of adjustments for both compression and rebound.
Spring preload and unit length are fully adjustable
too. Wheel travel is 133 mm. Every component in
the lamellar damping pack and external adjustment
systems has been developed, tested and calibrated
on road and track to achieve perfect control over
the hydraulics. The aluminium version reduces your
bike’s overall weight by a further 450 grams.
C. CARBON FIBRE PARTS
Race ready lightness and prestige even on
the road. These body parts are manufactured in
clear varnished carbon fibre and give an average
reduction in weight of 45% compared to the
standard parts they replace. All parts have been
safety tested and homologated by TÜV and can
therefore be used on the road as well as on the
racetrack.
D. ÖHLINS ADJUSTABLE STEERING DAMPER
KIT
Unbeatable adjustment and shimmy control.
Fits across the top yoke on a single-piece
bracket. Provides an ample range of adjustments
to customise steering response and absorb the
shimmy that sets in at certain speeds and over
rough ground. Twin chamber pressurised hydraulics
prevent air from entering the damper and ensure
consistently effective control over the steering.
E. FORGED ALUMINIUM WHEELS
Maximum performance on the track and on the
road. Forged from Anticorodal 6061 aluminium.
Thanks to the use of lightweight material and
advanced forging technology, these special wheels
(front and rear) help reduce the energy required to
move and steer your bike. The result is improved
handling on road and track alike. Less weight
means less inertia and a reduction in the gyroscopic
forces that affect a bike’s equilibrium and handling.
Available in GOLD and BLUE.
F. ERGAL REVERSE PATTERN GEARSHIFTER
For optimised performance on the racetrack.
Made in polished Ergal, and CAD/CAM machined
from a solid blank. Easy to fit and to adjust thanks
to uniball control linkages.
G. ADJUSTABLE ALUMINIUM FOOTRESTS
Competitive racing style. Made in polished
aluminium, and CAD/CAM machined from a solid
blank. Easy to fit and to adjust thanks to the
eccentric cam fixing system.
H. TANK BAG
The ideal accessory for brief trips and long
journeys. Expands upwards to give a total capacity
of 26 litres. Detaches quickly and easily from the
tank for use as a back pack. Made from extra
strong nylon with a non-scratch base to avoid
spoiling the finish of your tank. Transparent top
pocket for road maps. Comes complete with rain
hood for total weather-proofing. Stylish black finish
with the Aprilia logo.
J. REAR PADDOCK STAND
An indispensable aid to servicing in the pits or
at home. Derived from the paddock stand used for
SBK and GP bikes, this accessory proves invaluable
whenever you need to work on your bike in the pits
or in your own garage. Makes changing the rear
wheel quick and easy.
K. ELECTRONIC ANTI-THEFT SYSTEM
Specially developed for the Tuono’s electronics.
This system has not been merely adapted but
specially conceived, developed and tested by
Aprilia. Protects your Tuono without interfering
with its sophisticated engine and fuel management
systems. Incorporates the latest technology.
Homologated to THATCHAM standard, the strictest
international security standard. Independently
powered to avoid running down the bike’s battery.
Displays main battery level as well as functioning
as alarm.
L. PASSENGER SADDLE COVER
Standard on the Factory version. It can be bought
separately for the R version. For an incredibly
streetfighter look.
V60 Magnesium Evolution. Longitudinal 60° V twin, four stroke. Liquid cooling
with three-way pressurised circuit. Double overhead cams, mixed gear/chain
timing drive, four valves per cylinder. Patented AVDC anti-vibration double
countershaft. Euro 3.
95 RON unleaded petrol.
97 x 67.5 mm.
997.62 cc.
11.8 : 1.
102 kW (139 HP) at 9,500 rpm.
10.9 kgm (107 Nm) at 8,500 rpm.
Integrated electronic engine management system.
Indirect multi-point electronic injection. 57 mm diameter throttle bodies.
10.3 litre Air Box with dynamic Air Runner intake.
Digital electronic ignition, integrated with the injection control system.
One spark plug per cylinder.
Electric starter.
Two silencers with three way catalytic converter and lambda probe oxygen
sensor (Euro 3).
12 V – 500 W.
Dry sump with separate oil reservoir. Double trochoid pump with oil cooler.
Steel oil reservoir.
6 speed. Transmission ratios: 1
st
34/15 (2.27), 2
nd
31/19 (1.63), 3
rd
26/20 (1.3),
4
th
24/22 (1.091), 5
th
24/25 (0.96), 6
th
23/26 (0.88).
Multiple disc in oil bath with patented PPC power-assisted hydraulic control.
Metal braid clutch line. Radial master cylinder with 15 mm piston.
Spur gears. Transmission ratio: 60/31 (1.935:1).
Chain. Transmission ratio: 40/16 (2.5:1).
Box section sloping twin-spar frame in aluminium alloy.
Showa 43 mm upside-down fork with adjustment for spring preload, com-
pression and rebound damping. TUONO FACTORY: Öhlins Racing 43 mm
upside-down fork with adjustment for spring preload, compression and
rebound damping. 120 mm wheel travel.
Engine
Fuel
Bore and stroke
Displacement
Compression ratio
Maximum power at the crank
Maximum torque at the crank
Fuel system
Ignition
Starting
Exhaust system
Generator
Lubrication
Gearbox
Clutch
Primary drive
Final drive
Frame
Front suspension
Rear suspension
Front brake
Rear brake
Wheels
Tyres
Dimensions
Dry weight*
Tank
Aluminium alloy double banana swingarm. APS (Aprilia Progressive System)
rising rate linkages. Sachs hydraulic monoshock with adjustment for spring
preload and rebound damping.
TUONO FACTORY: Aluminium alloy double member swingarm.
APS (Aprilia Progressive System) rising rate linkages. Öhlins Racing
piggy-back monoshock with adjustment for spring preload, compression
and rebound damping. Wheel travel 133 mm.
double oating disc in stainless steel, Ø 320 mm.
Brembo triple bridge caliper with four 34 mm pistons and four sintered pads.
Metal braided brake line.
TUONO FACTORY: double floating disc in stainless steel, Ø 320 mm.
Brembo Triple Bridge radial caliper with four 34 mm pistons and four
sintered pads.
Metal braided brake line.
Rear: Brembo stainless steel disc, Ø 220 mm. Twin piston calliper, 32 mm
diameter pistons, sintered pads. Metal braided brake line.
Aluminium alloy. Front: 3.50 x 17”, rear: 6.00 x 17”.
TUONO FACTORY: Aluminium alloy.
Front: 3.50 x 17”, Rear: 6.00 x 17”.
Radial tubeless. Front: 120/70 ZR 17, rear: 190/50 ZR 17
(alternative: 180/55 ZR 17 and 190/55)
Maximum length: 2,025 mm.
Maximum width: 830 mm (at handlebars).
Maximum height: 1,100 mm (at handlebars).
Seat height: 810 mm.
Handlebar height: 1,020 mm at bar ends.
Wheelbase: 1,410 mm.
Trail: 103.7 mm.
Steering angle: 25°.
185 kg.
TUONO FACTORY: 181 kg.
Capacity 18 litres, 4 litre reserve.
* Without liquids and battery
TUONO 1000 R FACTORY
BLACK DREAM
TUONO 1000 R
DIABLO BLACK
TUONO 1000 R
ICE WHITE
TUONO 1000 R
DREAM BLUE
TUONO 1000 R + TUONO 1000 R FACTORY is an ecological vehicle with communitarian homologation Euro 3, in the respect of the acoustic and atmospheric pollution limits.
MINEDIVINE Photography: Milagro, Studio Pointer Testi: Daniele Varelli
Drive safely always wearing a helmet and protective clothing. Observe the laws of the road and respect the environment. Carefully read the owners’ handbook. Photographs, technical data, specifications
and colours shown in this brochure refer to the Italian market version and may be subject to change without prior notice. Ask your official Aprilia dealers for full details. In order to maintain your machine
in a safe and efficient manner, always demand official Aprilia Spare Parts, which are guaranteed by Aprilia Quality Service in respect of current legislation. E & O E. Aprilia offers Aprilia Road Assistance, a
call centre available 24 hours a day for information and road rescue.
E. & O.E. Aprilia reserves the right to change colour/specification without prior notice.
Concessionair
The trademark is the property of Piaggio & C. S.p.A.
aprilia
recommends