wattstopper LMRC-CA2 DLM Conduit Adapter Installation guide

LMRC-CA2 DLM Conduit Adapter
wattstopper
Brand
wattstopper
Model
LMRC-CA2 DLM Conduit Adapter
Type
Installation guide

This manual is also suitable for

Wattstopper
®
DLM Conduit Adapter
Installation Instructions • Instructions d’Installation • Instrucciones de Instalación
No: 24931 – 03/17 rev. 1
Catalog Number • Numéro de Catalogue • Número de Catálogo: LMRC-CA2
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
DESCRIPTION
The LMRC-CA2 assembly provides protection and conduit
connection points for the low-voltage area of the LMRC-22x
room controller. It is designed for applications where code or
the local AHJ requires that low-voltage wiring such as DLM
Local Network cables, control and communication wiring be
run inside conduit. The conduit adapter plate is compatible
with 4” square and 4 11/16” square junction boxes.
ATTENTION: This conduit adapter is provided with an
earthing conductor. Proper grounding of this conduit adapter
shall be in accordance with all applicable regulations, local
and NEC codes.
For complete installation and operation of the room controller,
see the instructions provided with the unit.
ASSEMBLY FOR LMRC-22X
Remove existing LMRC cover. Remove mounting plate from
LMRC-22X unit.
Install conduit adapter hinge
bracket. Use hole location as shown.
MOUNTING AND WIRING
Conduit
Adapter
Cover
Conduit Adapter
Plate
Sliding Hinge Shaft
Conduit
Adapter Hinge Bracket
Attach conduit adapter to
J-box as shown.
Attach unit to conduit adapter.
• Connect wires following
the wiring diagram for your
specific device.
• Ensure the conduit adapter
is properly grounded using
attached ground wire.
Adapter Ground Wire
WARNING: TURN THE POWER OFF AT THE
CIRCUIT BREAKER BEFORE WIRING.
1 2 3
1 2
800.879.8585
www.legrand.us/wattstopper
No. 24931 – 03/17 rev. 1
© Copyright 2017 Legrand All Rights Reserved.
© Copyright 2017 Tous droits réservés Legrand.
© Copyright 2017 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free
of defects in materials and workmanship for a
period of five (5) years. There are no obligations
or liabilities on the part of Wattstopper for
consequential damages arising out of, or in
connection with, the use or performance of this
product or other indirect damages with respect
to loss of property, revenue or profit, or cost of
removal, installation or reinstallation.
Wattstopper garantit que ses produits sont
exempts de défauts de matériaux et de fabrication
pour une période de cinq (5) ans. Wattstopper
ne peut être tenu responsable de tout dommage
consécutif causé par ou lié à l’utilisation ou
à la performance de ce produit ou tout autre
dommage indirect lié à la perte de propriété, de
revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos
están libres de defectos en materiales y mano
de obra por un período de cinco (5) años. No
existen obligaciones ni responsabilidades por
parte de Wattstopper por daños consecuentes
que se deriven o estén relacionados con el
uso o el rendimiento de este producto u otros
daños indirectos con respecto a la pérdida
de propiedad, renta o ganancias, o al costo
de extracción, instalación o reinstalación.
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
Secure unit to conduit adapter.
#1 Philips recommended
Attach and click on
conduit adapter cover.
Attach conduit tubing where needed
by using the provided knockouts.
Connect LMRJ cables.
3 4 5
  • Page 1 1
  • Page 2 2

wattstopper LMRC-CA2 DLM Conduit Adapter Installation guide

LMRC-CA2 DLM Conduit Adapter
wattstopper
Brand
wattstopper
Model
LMRC-CA2 DLM Conduit Adapter
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents