Clarion CJ7100E User manual

Brand: Clarion

Model: CJ7100E

Type: User manual

Clarion Co., Ltd.

Printed in Korea / Gedruckt in Korea / Stampato in Corea /

Imprimé en Corée / Impreso en Corea

CJ-7100E

2012/11

English

1. Before Use................................................... 3

2. Features ...................................................... 4

3. Names of the Monitor Buttons..................... 4

4. Operations of Monitor.................................. 4

5. Names of the Remote Controller Buttons.... 8

6. Operations of Remote Controller................. 8

7. Connections............................................... 12

8. Installation ................................................. 13

9. Troubleshooting......................................... 14

10. Specifications .......................................... 14

Contents

This unit has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC

Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This unit generates, uses, and can

radiate radio frequency energy, and, if not

installed and used in accordance with the

instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation.

If this unit does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the user

is encouraged to consult the dealer or an

experienced radio/TV technician for help.

 INFORMATION FOR USERS:

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY AND WILL VIOLATE FCC

APPROVAL.

CJ-7100E-A.book 2 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

Warning

 Do Not Back Up Vehicle While Relying Only on the Monitor Image

 Use Slow Speeds When Backing Up

 The rear-view monitor image has the same right-left inversion as your vehicle’s

rearview mirrors. Depending on the vehicle, the field and angle of view may differ.

 Precautions (when you use the monitor)

 Do not touch the LCD panel.

 Use the product at the temperature range of -10°C ~ 60°C.

 Screen may be a little dark when the product is operated in low temperature areas.

Screen will show normal luminosity after a few minutes.

 Do not disassemble and modify the product in any way.

This may cause fire and/or electric shock.

 When you install the product in a car and watch monitor, the car engine should be

running as there might occur excessive discharge of the car battery.

 Any liquid leaking into product may cause malfunction.

 If alternator noise from the speaker becomes objectionable when listening in AV

MODE, install a ground loop isolator between the AUDIO INPUT and the

connected AV component.

 Precautions (when you use the product in a car)

 The driver should not use the product while he/she is driving.

 Be cautious of humidity and shock when you use the product in a car.

 Cover the product when exposed to direct rays of the sun for a long period of

time.

(You should keep the product at a temperature range of -20°C ~ 70°C.)

1. Before Use

CJ-7100E-A.book 3 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

 Application of 7.0" WIDE TFT LCD with high resolution and low reflection

 All functions are displayed on screen (OSD function)

 7 Language Display Selection

(ENGLISH-DEUTSCH-ITALIANO-FRANÇAIS-ESPAñON- - )

 Picture quality control (PWM control)

 Free voltage (From DC12V to DC24V)

 Dimmer selection function

 Camera input (2 system) /Work together with back gear/turn signal

 Video input jack (video/mono audio)

 Wireless remote controller is included

POWER

2. Features

3. Names of the Monitor Buttons

4. Operations of Monitor

[DIMMER]

[MODE]

[MENU]

STAND BY LED

SENSOR

[UP]

[DOWN]

[POWER]

ON OFF

(1) Press [POWER] button to on the power.

(STAND BY state is OFF)

(2) Press [POWER] button again to off the

power.

(STAND BY state is ON)

CJ-7100E-A.book 4 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

MODE (Camera/AV Selection)

 It is a function to change CAMERA (CAM1/CAM2/AV).

 It is a function to select MAIN MENU (SETUP, PICTURE, CAMERA)

(1) Press [MENU] button to select MAIN MENU, changed color in red when it is selected.

• Every time the button is pressed, the setting changes.

(2) Press [MODE] button to select SUB MENU, changed color in red when it is selected.

• Every time the button is pressed, the setting changes.

CAM1 CAM2 AV

(1) Press [MODE] button.

• The characters of CAM1, CAM2 or AV

appear on the screen and they disappear

after 5 seconds.

CAM1

Note:In the mirror mode, the character is

inverted.

SETUP

PICTURE

CAMERA

DIMMER

LANGUAGE

DIRECTION

DISPLAY

RESET

ENGLISH

WIDE

CONTRAST

BRIGHTNESS

COLOR

TINT

SUB MENU

CAM1

CAM2 NORMAL

NORMAL

 SETUP  PICTURE

 CAMERA

CJ-7100E-A.book 5 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

SET UP (SUB MENU)

(3) Press [UP]/[DOWN] button to change Settings.

 DIMMER

–

• This setting can also be changed by pressing [DIMMER] ( ) button.

 LANGUAGE

– – – – –

–

 DIRECTION (Inverted upside down)

 DISPLAY (Screen size)

 RESET 

A factory default reset will clear all of OSD information

ENGLISH

DEUTSCH

ITALIANO

FRANÇAIS

ESPAñON

DIMMER

LANGUAGE

DIRECTION

DISPLAY

RESET

ENGLISH

WIDE

DIMMER

LANGUAGE

DIRECTION

DISPLAY

RESET

ENGLISH

WIDE

180

FULL

WIDE

NORMAL CINEMA

CJ-7100E-A.book 6 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

PICTURE (SUB MENU)

(3) Press [UP]/[DOWN] button to change Settings.

CAMERA (SUB MENU)

(3) Press [UP]/[DOWN] button to change Settings.

 In the mirror mode, the screen is inverted laterally.

CONTRAST

BRIGHTNESS

COLOR

TINT

CONTRAST

BRIGHTNESS

COLOR

TINT

CONTRAST

BRIGHTNESS

COLOR

TINT

 CONTRAST  BRIGHTNESS  COLOR

CONTRAST

BRIGHTNESS

COLOR

TINT

 TINT

CAM1

CAM2 NORMAL

NORMAL

CJ-7100E-A.book 7 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

POWER

Names of the Remote Controller

Buttons

6. Operations of Remote Controller

[POWER]

[DIM]

[DISP]

[MUTE]

[MODE]

[MENU]

[VOL+-]

[]

(1) Press [POWER] button to on the power.

(STAND BY state is OFF)

(2) Press [POWER] button again to off the

power.

(STAND BY state is ON)

ON OFF

CJ-7100E-A.book 8 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

MODE (Camera/AV Selection)

 It is a function to change CAMERA (CAM1/CAM2/AV).

MENU/

 It is a function to select MAIN MENU (SETUP, PICTURE, CAMERA)

(2) Press [] button to select SUB MENU, changed color in red when it is selected.

• Every time the button is pressed, the setting changes.

SET UP (SUB MENU)

(3) Press [] button to change Settings.

 DIMMER

–

 LANGUAGE

– – – – –

–

CAM1 CAM2 AV

Note: In the mirror mode, the character is

inverted.

(1) Press [MODE] button.

• The characters of CAM1, CAM2 or AV

appear on the screen and they disappear

after 5 seconds.

CAM1

SETUP

PICTURE

CAMERA

(1) Press [MENU] button to select MAIN

MENU, changed color in red when it is

selected.

• Every time the button is pressed, the

setting changes.

ENGLISH

DEUTSCH

ITALIANO

FRANÇAIS

ESPAñON

CJ-7100E-A.book 9 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

 DIRECTION (Inverted upside down)

 DISPLAY (Screen size)

 RESET 

A factory default reset will clear all of OSD information

PICTURE (SUB MENU)

(3) Press [] button to change Settings.

CAMERA (SUB MENU)

(3) Press [] button to change Settings.

 In the mirror mode, the screen is inverted laterally.

DIMMER

LANGUAGE

DIRECTION

DISPLAY

RESET

ENGLISH

WIDE

DIMMER

LANGUAGE

DIRECTION

DISPLAY

RESET

ENGLISH

WIDE

180

FULL

WIDE

NORMAL CINEMA

CONTRAST

BRIGHTNESS

COLOR

TINT

CONTRAST

BRIGHTNESS

COLOR

TINT

CONTRAST

BRIGHTNESS

COLOR

TINT

 CONTRAST  BRIGHTNESS  COLOR

CONTRAST

BRIGHTNESS

COLOR

TINT

 TINT

CAM1

CAM2 NORMAL

NORMAL

CJ-7100E-A.book 10 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

VOL +-

DISP

MUTE

DIM

(1) Press [VOL+] button to turn up the volume.

(2) Press [VOL-] button to turn down the

volume.

VOLUME

(1) Press [DISP] button to select the screen

size.

FULL

WIDE

NORMAL CINEMA

(1) Press [MUTE] button to mute the sound.

(2) Press [MUTE] button again to cancel.

(1) Press [DIM] button to change setting.

–

CJ-7100E-A.book 11 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

7. Connections

*3 *3

GREEN

(CAMERA2)

ORANGE

(CAMERA1)

BLACK

GROUND

RED

ACCESSORY(ACC)

DC12V

/24V

CAMERA1

(Sold Separately)

CAMERA2

(Sold Separately)

Use a Clarion camera.

A relay cable, sold separately, is required

for connecting the camera.

Use tape to keep the connection between

the monitor cable and the camera relay

cable secure.

MONITOR CABLE

CAMERA2

RELAY CABLE

YELLOW

VIDEO INPUT

WHITE

AUDIO INPUT

 Please be sure to connect when you connect the camera.

ORANGE (CAMERA-1, priority) Standby + (for rear-view)

Connect this cable to “+” of back gear lamp.

GREEN (CAMERA-2) Standby + (for side-view)

Connect this cable to “+” of turn signal lamp.

CJ-7100E-A.book 12 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

1. Choose a location where you install the Monitor. Clean the place for the Stand with cleanser

and remove the Protective Tape. And then attach it exactly where you want.

2. Fasten the Monitor with Tapping Screw.

3. Adjust angle of Stand and install Monitor.

4. Connect each connecting cable as in the product installation reference.

8. Installation

Fix Knob

(Bracket)

Safeguard tape

Control Knob

(Angle)

Stand Base

CJ-7100E-A.book 13 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

Caution: The design and specifications of this product in order to improve its quality may be changed without notice.

9. Troubleshooting

Problem Cause Measure

No image is displayed.

Is camera connected

properly?

Check the wiring to the camera and the

camera connection.

Power does not turn on.

Is power cable

connected properly?

Check the wiring.

Is a fuse blown out?

Replace with a fuse of the same amperage (3A).

Color is washed-out.

Operating

environment is

inappropriate.

Temperature in the car is below 0°C or over

60°C. Check to see that the temperature in

the car is appropriate (around 25°C).

10. Specifications

ITEM

SPECIFICATION

NTSC PAL

LCD PANEL

SCREEN SIZE 7 INCH (178.8 mm)

NUMBER OF PIXELS 800(W) x 3(RGB) x 480(H)

DOT PITCH 0.0642(W) x 0.1790(H) mm

BRIGHTNESS

400 cd/m

DISPLAY AREA 154.08(W) x 85.92(H) mm

CONTRAST RATIO 1:500

VIEW ANGLE (L/R/U/D) 70°/70°/50°/70°

POWER SUPPLY

VOLTAGE DC 12V - 24V

CURRENT 450mA (DC 12V, MONITOR SET ONLY)

INPUT SYSTEM AUTO (NTSC/PAL)

FREQUENCY

HORIZONTAL 15.734 KHz 15.625 KHz

VERTICAL 60Hz 50Hz

INPUT SIGNAL

VIDEO SIGNAL COMPOSITE VIDEO SIGNAL

AUDIO SIGNAL MONO SIGNAL 400mVrms

SPEAKER

0.5W MAX

LANGUAGE DISPLAY SELECTION 7 LANGUAGE

USER CONTROLS POWER, MODE, MENU, UP, DOWN, DIMMER

OPERATING TEMPERATURE -10°C ~ + 60°C

STORAGE TEMPERATURE -20°C ~ + 70°C

DIMENSION (W x H x D) 187(W) x 113.5(H) x 26.5(D)

WEIGHT 461g

ACCESSORIES

MONITOR CABLE ASS’Y·······························1

STAND ASS’Y ·············································1

REMOTE CONTROLLER (included with battery)·····1

CJ-7100E-A.book 14 ページ２０１２年９月１８日　火曜日　午後１時５５分

English

MEMO

CJ-7100E-A.book 15 ページ２０１２年９月１８日　火曜日　午後１時５５分

Clarion Co., Ltd.

Printed in Korea / Gedruckt in Korea / Stampato in Corea /

Imprimé en Corée / Impreso en Corea

CJ-7100E

2012/11

Clarion CJ7100E User manual

Clarion CJ7100E User manual

Clarion CJ7100E User manual

Related papers

Other documents