Merco / Savory HMC-1 Datasheet

Merco / Savory
Brand
Merco / Savory
Model
HMC-1
Type
Datasheet

This manual is also suitable for

Heated Merchandising Cabinet
Model
HMC-1 HMC-1X HMC-2 HMC-2X
The Merco Heated Merchandising
Cabinet offers a unique concept in food
holding and display. Balancing a precise
combination of heat and humidity, Merco
Heated Merchandising Cabinets increase
sales and profits by reducing waste,
maintaining quality, and displaying
food with appealing design. Utilized in
cafeterias, convenience stores, schools,
restaurants, and supermarkets, Merco
Heated Merchandising Cabinets are a
perfect way to merchandise your hot
food items.
Flexibility
A complete range of cabinet sizes, door
options, and rack types allow for perfect
merchandising of food products such as
pizza, fried foods, bakery, and more.
Our quick recovery heating system and
extremely even temperatures throughout
the cabinet eliminate “hot spots” and
ensure consistent product quality and
long hold times, (1-4 hours).
Voltage
120 volts, 60 Hz, 1440 watts, 12 amps
standard; uses NEMA 5-15P.
Merco Guarantee:
Merco equipment is guaranteed to be
free from quality problems in materials
and workmanship for a period of one
(1) year from the date of purchase, or
eighteen (18) months from the date of
shipment from factory, whichever comes
first. Metal sheath air heating elements
are warranted against burnout and
breakage for two (2) years.
Description
1111 N. Hadley Rd.
P.O. Box 1229
Ft. Wayne, IN 46801-1229
Tel: 888-417-5462
Fax: 800.285.9511
www.mercoproducts.com
The Heated Merchandising Cabinet shall be
Merco model ______ rated at 1440 watts,
120 volts, single phase AC.
Bid Specifications:
Heated Merchandising Cabinet
Models
HMC-1 HMC-1X HMC-2 HMC-2X
Standard Features
•
Fluorescent lights help showcase food product
• Tempered glass door and side panels provide
maximum heat retention and allow for full
cabinet display
• Stainless water reservoir provides all day
moisture
• Low-water protection prevents heating
element burnout and alerts operator to low
water condition
• Large access doors are field reversible and will
accept a 19” (483 mm) diameter pizza pan
Options
•
Various rack and sign configurations available
Designs and specifications subject to change without notice.
1111 N. Hadley Rd.
P.O. Box 1229
Ft. Wayne, IN 46801-1229
Tel: 888-417-5462
Fax: 800.285.9511
www.mercoproducts.com
©2010 Merco, LLC / Printed in the U.S.A. / XXXX-4/10
Model Type Description
Shipping
Weight
HMC-1 1-Door 1-Door Heated Merchandising Cabinet - Includes one (1) rack and one (1) graphic sign 120 lbs. (54 kg)
HMC-1X 1-Door 1-Door Motorless Heated Merchandising Cabinet - Includes one (1) rack and one (1) graphic sign 118 lbs. (54 kg)
HMC-2 2-Door 2-Door Heated Merchandising Cabinet - Includes one (1) rack and one (1) graphic sign 122 lbs. (55 kg)
HMC-2X 2-Door 2-Door Motorless Heated Merchandising Cabinet - Includes one (1) rack and one (1) graphic sign 120 lbs. (54 kg)
Dimensions
HMC-1 & 1X:
22.42” W x 24.11” D x 32.54” H (569 x 612 x 827 mm)
HMC-2 & 2X:
22.42” W x 25.36” D x 32.54” H (569 x 645 x 827 mm)
Cabinet Opening:
18.98” W x 23.73” H (482 x 603 mm)
Cord Location
Facing controls, right-hand side panel,
lower right corner.
Water Quality Requirements
Water supply in excess of 3.0 grains of hardness per gallon (GPG) (.75
grains of hardness per liter) must be treated and softened before
being used. Water containing over 3.0 GPG (.75 GPL) will decrease the
efficiency and reduce the operating life of the unit. NOTE: Product failure
caused by liming or sediment build-up is not covered under warranty.
Heated Merchandising Cabinet
Models
HMC-1 HMC-1X HMC-2 HMC-2X
27.584
701[ ]
(STD LEG)
28.632
727[ ]
19.385 492[ ]
19.385 492[ ]
20.869 530[ ]
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HMC-M1,-M1X,CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
N/A
DRAWING NUMBER
10-02-931
REV
SCALE:0.125 PROJ: 988203 SHEET 1 OF 2
10-02-931
- - - - -
-
-
- -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
NOTES:
1) SEE 10-03-380 FOR ASSEMBLY DRAWING.
2) SEE 10-02-932 CONSTRUCTION DRAWING FOR
HMC-M2 DOOR UNIT.
3) SEE 10-03-395 ASSEMBLY DRAWING FOR
HMC-M2 DOOR UNIT.
4) SEE SHEET 2 FOR WIRING DIAGRAM REFERENCE.
5) STANDARD FDWD CABINET COMES WITH CORNER POST,
DOOR HANDLE & DOOR HINGE EXTRUSIONS IN ANODIZED
ALUMINUM COLOR WITH COLD ROLLED (CR) BASE ASSEMBLY,
CR CONTROL AREA ASSEMBLY & CR HOOD PAINTED BLACK.
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DIMENSIONS IN INCHES [MM]
NOTE: SEE SHEET 2 FOR SPECIFICATIONS.
WATER
FILL
CUP
ON/OFF
SWITCH
ELECTRONIC CONTROL BOARD
TEMPERATURE INDICATOR
ELECTRONIC
CONTROL BOARD
TEMPERATURE &
HUMIDITY
CONTROLS
6 FT. [1829] CORD WITH NEMA 5-15P PLUG
SEE TABLE ON SHEET 2 FOR OPTIONAL CORDS
27.584
701[ ]
(STD LEG)
28.632
727[ ]
19.385 492[ ]
19.385 492[ ]
20.869 530[ ]
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HMC-M1,-M1X,CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
N/A
DRAWING NUMBER
10-02-931
REV
SCALE:0.125 PROJ: 988203 SHEET 1 OF 2
10-02-931
- - - - -
-
-
- -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
NOTES:
1) SEE 10-03-380 FOR ASSEMBLY DRAWING.
2) SEE 10-02-932 CONSTRUCTION DRAWING FOR
HMC-M2 DOOR UNIT.
3) SEE 10-03-395 ASSEMBLY DRAWING FOR
HMC-M2 DOOR UNIT.
4) SEE SHEET 2 FOR WIRING DIAGRAM REFERENCE.
5) STANDARD FDWD CABINET COMES WITH CORNER POST,
DOOR HANDLE & DOOR HINGE EXTRUSIONS IN ANODIZED
ALUMINUM COLOR WITH COLD ROLLED (CR) BASE ASSEMBLY,
CR CONTROL AREA ASSEMBLY & CR HOOD PAINTED BLACK.
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DIMENSIONS IN INCHES [MM]
NOTE: SEE SHEET 2 FOR SPECIFICATIONS.
WATER
FILL
CUP
ON/OFF
SWITCH
ELECTRONIC CONTROL BOARD
TEMPERATURE INDICATOR
ELECTRONIC
CONTROL BOARD
TEMPERATURE &
HUMIDITY
CONTROLS
6 FT. [1829] CORD WITH NEMA 5-15P PLUG
SEE TABLE ON SHEET 2 FOR OPTIONAL CORDS
HMC-1
27.584
701[ ]
(STD LEG)
28.632
727[ ]
19.385 492[ ]
19.385 492[ ]
20.869 530[ ]
22.003 559[ ]
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
MERCO, LLC
DESCRIPTION
HMC-M2,-M2X,CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF MERCO, LLC
PART NUMBER
N/A
DRAWING NUMBER
10-02-932
REV
SCALE:0.125 PROJ: 988203 SHEET 1 OF 2
10-02-932
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
NOTE:
1) SEE 10-03-395 FOR ASSEMBLY DRAWING.
2) SEE 10-02-931 CONSTRUCTION DRAWING FOR
HMC-M1 DOOR UNIT.
3) SEE 10-03-380 ASSEMBLY DRAWING FOR
HMC-M1 DOOR UNIT.
4) SEE SHEET 2 FOR WIRING DIAGRAM REFERENCE.
5) STANDARD FDWD CABINET COMES WITH CORNER POST,
DOOR HANDLE & DOOR HINGE EXTRUSIONS IN ANODIZED
ALUMINUM COLOR WITH COLD ROLLED (CR) BASE ASSEMBLY,
CR CONTROL AREA ASSEMBLY & CR HOOD PAINTED BLACK.
NOTE: SEE SHEET 2 FOR SPECIFICATIONS.
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DOOR HINGED LEFT OR HINGED RIGHT.
9) DIMENSIONS IN INCHES [MM]
WATER
FILL
CUP
ON/OFF SWITCH
ELECTRONIC CONTROL BOARD
TEMPERATURE INDICATOR
ELECTRONIC
CONTROL BOARD
TEMPERATURE &
HUMIDITY
CONTROLS
6 FT. [1829] CORD WITH NEMA 5-15P PLUG
SEE TABLE ON SHEET 2 FOR EXPORT CORD
12
27.584
701[ ]
(STD LEG)
28.632
727[ ]
19.385 492[ ]
19.385 492[ ]
20.869 530[ ]
22.003 559[ ]
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
MERCO, LLC
DESCRIPTION
HMC-M2,-M2X,CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF MERCO, LLC
PART NUMBER
N/A
DRAWING NUMBER
10-02-932
REV
SCALE:0.125 PROJ: 988203 SHEET 1 OF 2
10-02-932
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
NOTE:
1) SEE 10-03-395 FOR ASSEMBLY DRAWING.
2) SEE 10-02-931 CONSTRUCTION DRAWING FOR
HMC-M1 DOOR UNIT.
3) SEE 10-03-380 ASSEMBLY DRAWING FOR
HMC-M1 DOOR UNIT.
4) SEE SHEET 2 FOR WIRING DIAGRAM REFERENCE.
5) STANDARD FDWD CABINET COMES WITH CORNER POST,
DOOR HANDLE & DOOR HINGE EXTRUSIONS IN ANODIZED
ALUMINUM COLOR WITH COLD ROLLED (CR) BASE ASSEMBLY,
CR CONTROL AREA ASSEMBLY & CR HOOD PAINTED BLACK.
NOTE: SEE SHEET 2 FOR SPECIFICATIONS.
6) DOOR OPENING 19 3/4" [502] TALL X 15 3/4" [400] WIDE.
7) WILL ACCEPT 1/2 SHEET PANS.
8) DOOR HINGED LEFT OR HINGED RIGHT.
9) DIMENSIONS IN INCHES [MM]
WATER
FILL
CUP
ON/OFF SWITCH
ELECTRONIC CONTROL BOARD
TEMPERATURE INDICATOR
ELECTRONIC
CONTROL BOARD
TEMPERATURE &
HUMIDITY
CONTROLS
6 FT. [1829] CORD WITH NEMA 5-15P PLUG
SEE TABLE ON SHEET 2 FOR EXPORT CORD
12
HMC-2
Accessories
Racks -
7-Shelf Multi-Purpose Rack
4-Tier Circle Rack
5-Tier Circle Rack
4-Tier Pan Rack
3 -Shelf Angle Rack
5-Shelf Angle Rack
3-Tier Pretzel Tree
4” (102 mm) Adjustable Legs
Perforated Pizza Pans - 14”, 15”, 16” or 18” (356, 381, 406m or 457 mm)
Diameter
Half-Size Sheet Pan
Motorless Rack Coupling (For -X models only)
Graphic Adhesive Decals (three (3) per set)
Hot Fresh Pizza
Hot Fresh Pretzels
Hot Fresh Sandwiches
Hot & Fresh
4-Tier Circle Rack
Rack Opening: 4.63” (118mm)
5-Tier Circle Rack
Rack Opening: 3.63” (93mm)
ITEM#
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-Mail: equipsales@hatcocorp.com
Form No. FDWD Spec Sheet
20.89" (530 mm)
Models FDWD-2 & -2X only
22.02" (559 mm)
SIDE VIEW
28.54"
(725 mm)
FRONT VIEW
19.39" (492 mm)
PRODUCT SPECS
Impulse Display Cabinet
The humidity controlled Impulse Display Cabinet shall be a Flav-R-Fresh
®
Model ... rated at ... volts and ... watts, as manufactured by the Hatco
Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 parts and service assistance (U.S. and Canada only), the
cabinet shall have ....door(s), tempered glass sides, stationary rack
(or revolving display), and fluorescent display light. It shall include
a water reservoir, electronic contr
ols, on-off switch, and indicating lights.
A 6' (1829 mm) cord with plug shall be attached.
Accessories shall include merchandising racks, display sign holders (signs
not included), and food graphic decals.
OPTIONS (NOT FOR RETROFIT)
❑ Designer Colors: Warm Red, Black , Gray Granite, White Granite,
Navy Blue, Hunter Green, Antique Copper
❑ 3" or 6" (76 or 152 mm) Merchandising Sign Holders for one-,
two-, or three-sides (signs not included)
❑ 3-Sided Sign Holder (FDWD-1,
-1X only, signs not included)
❑ 4" (102 mm) Adjustable Legs
ACCESSORIES
❑
4-Tier Circle Rack (Requires motorless rack coupling on -X models)
❑
4-Shelf Multi-Purpose Rack (Each shelf 13.63"W x 12.62"D
(346 x 321 mm))
❑
4-Shelf Angle Rack (Each shelf 14.19"W x 14.63"D (360 x 370 mm))
❑
3-Tier Pretzel Tree (Requires motorless rack coupling on -X models)
❑
Motorless R ack Coupling (For -X models only)
❑
Merchandising Display Sign Holder (signs not included)
❑
Graphic Adhesive Decals (3 per set)
Pizza Photo
Hot
Pizza Hot Pretzel
*
Models FDWD-1 and FDWD-2 include rack motor. Models with “X” designator do not
have revolving display and are NOT available for retrofit.
†
Pretzel Rack available in lieu of Circle Rack.
Display Rack Selection
3-Tier Pretzel Tree
Model FDWD3TPT
Rack Opening:
5.88" (149 mm)
4-Shelf Angle Rack
Model FDWD4SAR
Rack Opening:
3.75" (95 mm)
4-Shelf Multi-Purpose
Rack*
Model FDWD4SMP
Rack Opening:
3.5" (89 mm)
4-Tier Circle Rack
M
odel FDWD4TCR
Rack Opening:
3.25" (83 mm)
Maximum
15" (381 mm)
diameter pans
DIMENSIONS
FDWD-1, FDWD-1X: 19.39"W x 20.89"D x 28.54"H
(492 x 530 x 725 mm).
FDWD-2, FDWD-2X: 19.39"W x 22.02"D x 28.54"H
(492 x 559 x 725 mm).
Cabinet Opening:
FDWD-1, -1X, -2, -2X: 15.75"W x 19.75"H (400 x 502 mm).
VOLTAGE
FDWD-1, -1X, -2, -2X: 120 volts, 60 Hz, 1420 watts, 11.8 amps
(uses NEMA 5-15P).
Export voltages available.
CORD LOCATION
FDWD-1, -1X, -2, -2X:
Facing controls, right-hand side panel, lower right corner.
PLUG CONFIGURATIONS
FLAV-R-FRESH
®
IMPULSE DISPLAY CABINETS
Models FDWD-1, FDWD-1X, FDWD-2, FDWD-2X
* Accommodates half-size sheet pans (Not included).
Printed in U.S.A.
December 2009
SPECIFICATIONS
Model* Type Rack Style Shipping Weight
FDWD-1 1 Door Circle Rack
†
with Rack Motor 90 lbs. (41 kg)
FDWD-1X 1 Door
Multi-Purpose Rack
90 lbs. (41 kg)
without Rack Motor
FDWD-2 2 Doors Circle Rack
†
with Rack Motor 91 lbs. (41 kg)
FDWD-2X 2 Doors
Multi-Purpose Rack
91 lbs. (41 kg)
without Rack Motor
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon (GPG) (.75
grains of hardness per liter) must be tre
ated and softened before being
used. Water containing over 3.0 GPG (.75 GPL) will decrease the efficiency
and reduce the operating life of the unit.
Note: Product failure caused by liming or sediment buildup is not covered
under warranty.
BS-1363CEE 7/7 Schuko
AS-3112
NEMA 5-15P
3-Tier Pretzel Tree
Rack Opening: 5.88” (149mm)
ITEM#
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-Mail: equipsales@hatcocorp.com
Form No. FDWD Spec Sheet
20.89" (530 mm)
Models FDWD-2 & -2X only
22.02" (559 mm)
SIDE VIEW
28.54"
(725 mm)
FRONT VIEW
19.39" (492 mm)
PRODUCT SPECS
Impulse Display Cabinet
The humidity controlled Impulse Display Cabinet shall be a Flav-R-Fresh
®
Model ... rated at ... volts and ... watts, as manufactured by the Hatco
Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 parts and service assistance (U.S. and Canada only), the
cabinet shall have ....door(s), tempered glass sides, stationary rack
(or revolving display), and fluorescent display light. It shall include
a water reservoir, electronic contr
ols, on-off switch, and indicating lights.
A 6' (1829 mm) cord with plug shall be attached.
Accessories shall include merchandising racks, display sign holders (signs
not included), and food graphic decals.
OPTIONS (NOT FOR RETROFIT)
❑ Designer Colors: Warm Red, Black , Gray Granite, White Granite,
Navy Blue, Hunter Green, Antique Copper
❑ 3" or 6" (76 or 152 mm) Merchandising Sign Holders for one-,
two-, or three-sides (signs not included)
❑ 3-Sided Sign Holder (FDWD-1,
-1X only, signs not included)
❑ 4" (102 mm) Adjustable Legs
ACCESSORIES
❑
4-Tier Circle Rack (Requires motorless rack coupling on -X models)
❑
4-Shelf Multi-Purpose Rack (Each shelf 13.63"W x 12.62"D
(346 x 321 mm))
❑
4-Shelf Angle Rack (Each shelf 14.19"W x 14.63"D (360 x 370 mm))
❑
3-Tier Pretzel Tree (Requires motorless rack coupling on -X models)
❑
Motorless R ack Coupling (For -X models only)
❑
Merchandising Display Sign Holder (signs not included)
❑
Graphic Adhesive Decals (3 per set)
Pizza Photo
Hot
Pizza Hot Pretzel
*
Models FDWD-1 and FDWD-2 include rack motor. Models with “X” designator do not
have revolving display and are NOT available for retrofit.
†
Pretzel Rack available in lieu of Circle Rack.
Display Rack Selection
3-Tier Pretzel Tree
Model FDWD3TPT
Rack Opening:
5.88" (149 mm)
4-Shelf Angle Rack
Model FDWD4SAR
Rack Opening:
3.75" (95 mm)
4-Shelf Multi-Purpose
Rack*
Model FDWD4SMP
Rack Opening:
3.5" (89 mm)
4-Tier Circle Rack
M
odel FDWD4TCR
Rack Opening:
3.25" (83 mm)
Maximum
15" (381 mm)
diameter pans
DIMENSIONS
FDWD-1, FDWD-1X: 19.39"W x 20.89"D x 28.54"H
(492 x 530 x 725 mm).
FDWD-2, FDWD-2X: 19.39"W x 22.02"D x 28.54"H
(492 x 559 x 725 mm).
Cabinet Opening:
FDWD-1, -1X, -2, -2X: 15.75"W x 19.75"H (400 x 502 mm).
VOLTAGE
FDWD-1, -1X, -2, -2X: 120 volts, 60 Hz, 1420 watts, 11.8 amps
(uses NEMA 5-15P).
Export voltages available.
CORD LOCATION
FDWD-1, -1X, -2, -2X:
Facing controls, right-hand side panel, lower right corner.
PLUG CONFIGURATIONS
FLAV-R-FRESH
®
IMPULSE DISPLAY CABINETS
Models FDWD-1, FDWD-1X, FDWD-2, FDWD-2X
* Accommodates half-size sheet pans (Not included).
Printed in U.S.A.
December 2009
SPECIFICATIONS
Model* Type Rack Style Shipping Weight
FDWD-1 1 Door Circle Rack
†
with Rack Motor 90 lbs. (41 kg)
FDWD-1X 1 Door
Multi-Purpose Rack
90 lbs. (41 kg)
without Rack Motor
FDWD-2 2 Doors Circle Rack
†
with Rack Motor 91 lbs. (41 kg)
FDWD-2X 2 Doors
Multi-Purpose Rack
91 lbs. (41 kg)
without Rack Motor
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon (GPG) (.75
grains of hardness per liter) must be tre
ated and softened before being
used. Water containing over 3.0 GPG (.75 GPL) will decrease the efficiency
and reduce the operating life of the unit.
Note: Product failure caused by liming or sediment buildup is not covered
under warranty.
BS-1363CEE 7/7 Schuko
AS-3112
NEMA 5-15P
7-Shelf Multi-Purpose Rack
Rack Opening: 2.5” (64mm)
ITEM#
FLAV-R-SAVOR
®
HOLDING & DISPLAY CABINETS
Models FSD-1, FSD-1X, FSD-2, FSD-2X FSDT-1, FSDT-1X, FSDT-2, FSDT-2X
22.42" (569 mm)
24.11" (612 mm)
Models -2 & -2X only
25.36" (645 mm)
Models FSD
27.54"
(700 mm)
*
Models FSDT
32.54"
(827 mm)
*
SIDE VIEW
FRONT VIEW
OPTIONS (NOT FOR RETROFIT)
Designer Colors: Warm Red, Black, Gray Granite, White Granite,
Navy Blue, Hunter Green, Antique Copper
7.5”H (191 mm) Merchandising Display Sign Holder with
Acrylic Window (one per side) (sign not included)
ACCESSORIES
Racks – FSD ONLY
5-Shelf Multi-Purpose Rack Model FSD5SMP
3-Tier Circle Rack Model FSD3TCR
3-Tier Pan Rack Model FSD3TPR
Racks – FSDT ONLY
7-Shelf Multi-Purpose Rack Model FSDT7SMP
4-Tier Circle Rack Model FSDT4TCR
5-Ti
er Circle Rack Model FSDT5TCR
4-Tier Pan Rack Model FSDT4TPR
3-Shelf Angle Rack Model FSDT3SAR
5-Shelf Angle Rack Model FSDT5SAR
3-Tier Pretzel Tree Model FSDT3TPT
Merchandising Display Sign Holder with Acrylic Window
Merchandising Display Sign: Pizza or Chicken
Food Graphic Adhesive Decals (3 per set): Pizza, Chicken, Pretzel,
or Croissants/Biscuits
4" (102 mm) Adjustable Legs
Perforated Pizza Pans – 14", 15", 16",
or 18" (356, 381, 406, 457 mm) Diameter
Half
-size Sheet Pan
Motorless Rack Coupling (For -X Models only)
* Models FSD-1, FSD-2, FSDT-1, and FSDT-2 include rack display motor. Models with “X” designator do
not have revolving display.
†
Rack shown is included with unit. Other racks available, see
Display Rack Selection
.
Model* Type Rack Style
†
Shipping Weight
FSD-1 1 Door 3-Tier Circle Rack w/Motor 113 lbs. (51 kg)
FSD-1X 1 Door 3-Tier Pan Rack w/o Motor 111 lbs. (50kg)
FSD-2 2 Doors 3-Tier Circle Rack w/Motor 114 lbs. (
52 kg)
FSD-2X 2 Doors 3-Tier Pan Rack w/o Motor 112 lbs. (51 kg)
SPECIFICATIONS
Standard Models
Model* Type Rack Style
†
Shipping Weight
FSDT-1 1 Door 4-Tier Circle Rack w/Motor 120 lbs. (54 kg)
FSDT-1X 1 Door 4-Tier Pan Rack w/o Motor 118 lbs. (54kg)
FSDT-2 2 Doors 4-Tier Circle Rack w/Motor 122 lbs. (55 kg)
FSDT-2X 2 Doors 4-Tier Pan Rack w/o Motor 120 lbs. (54 kg)
Tall Models
DIMENSIONS
FSD-1, -1X: 22.42"W x 24.11"D x 27.54"H* (569 x 612 x 700 mm).
FSDT-1, -1X: 22.42"W x 24.11"D x 32
.54"H* (569 x 612 x 827 mm).
FSD-2, -2X: 22.42"W x 25.36"D x 27.54"H* (569 x 645 x 700 mm).
FSDT-2, -2X: 22.42"W x 25.36"D x 32.54"H* (569 x 645 x 827 mm).
Cabinet Openings: FSD – 18.98"W x 18.73"H (482 x 476 mm).
FSDT – 18.98"W x 23.73"H (482 x 603 mm).
* Add 1" (25 mm) to height for display sign.
VOLTAGE
120 volts, 60 Hz, 1440 watts,
12.0 amps standard uses
NEMA 5-15P. Export voltages
available.
5-Shelf Multi-Purpose Rack
Model FSD5SMP
Rack Opening:
2.5" (64 mm)
7-Shelf Multi-Purpose
Rack
Model FSDT7SMP
Rack Opening:
2.5" (64 mm)
3-Shelf Angle Rack
Model FSDT3SAR
Rack Opening:
3.5" (89 mm)
Rack shelves slant at
15° angle
5-Shelf Angle Rack
Model FSDT5SAR
Rack Opening:
2.5" (64 mm)
3-Tier Pretzel Tree
Model FSDT3TPT
Rack Opening:
5.88" (150 mm)
3-Tier Circle Rack
Model FSD3TCR
Rack Opening:
4.63" (118 mm)
4-Tier Circle Rack
Model FSDT4TCR
Rack Opening:
4.63" (118 mm)
5-Tier Circle Rack
Model FSDT5TCR
Rack Opening:
3.63" (93 mm)
3-Tier Pan Rack*
Model FSD
3TPR
Rack Opening:
3.5" (89 mm)
4-Tier Pan Rack*
Model FSDT4TPR
Rack Opening:
3.5" (89 mm)
Display Rack Selection
PRODUCT SPECS
Holding and Display Cabinet
The humidity controlled Holding and Display Cabinet shall be
a Flav-R-Savor
®
Model ...., rated at ....volts and ....watts, as manufactured by the
Hatco Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 parts and service assistance (U.S. and Canada only), the
cabinet
shall have ....door(s), tempered glass sides, st
ationary
rack (or revolving display), and fluorescent display lights. It shall include
a water reservoir, humidity selector switch, temperature selector dial,
on-off switch, indicating lights, and a 6' (1829 mm) cord with
plug attached.
Accessories shall include adjustable legs, display racks, pans, merchandising
display sign(s), and food graphic decals.
* Accommodates half-size
sheet pans (not included).
BS-1363CEE 7/7 SchukoNEMA 5-15P
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. FSD Spec Sheet
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon
(GPG) (.75 grains of hardness per liter) must be treated and
softened before being used. Water containing over 3.0 GPG
(.75 GPL) will decrease the eff
iciency and reduce the
operating life of the unit.
Note:Product failure caused by liming or sediment
buildup is notcovered under warranty.
CORD LOCATION
Facing controls, right-hand side panel,
lower right corner.
PLUG CONFIGURATIONS
Printed in U.S.A.
August 2009
4-Tier Pan Rack*
Rack Opening: 3.5” (89mm)
*Accommodates half-size sheet pans
(not included)
22.42" (569 mm)
24.11" (612 mm)
Models -2 & -2X only
25.36" (645 mm)
Models FSD
27.54"
(700 mm)
*
Models FSDT
32.54"
(827 mm)
*
SIDE VIEW
FRONT VIEW
5-Shelf Angle Rack
Rack Opening: 2.5” (64mm)
ITEM#
FLAV-R-SAVOR
®
HOLDING & DISPLAY CABINETS
Models FSD-1, FSD-1X, FSD-2, FSD-2X FSDT-1, FSDT-1X, FSDT-2, FSDT-2X
22.42" (569 mm)
24.11" (612 mm)
Models -2 & -2X only
25.36" (645 mm)
Models FSD
27.54"
(700 mm)
*
Models FSDT
32.54"
(827 mm)
*
SIDE VIEW
FRONT VIEW
OPTIONS (NOT FOR RETROFIT)
Designer Colors: Warm Red, Black, Gray Granite, White Granite,
Navy Blue, Hunter Green, Antique Copper
7.5”H (191 mm) Merchandising Display Sign Holder with
Acrylic Window (one per side) (sign not included)
ACCESSORIES
Racks – FSD ONLY
5-Shelf Multi-Purpose Rack Model FSD5SMP
3-Tier Circle Rack Model FSD3TCR
3-Tier Pan Rack Model FSD3TPR
Racks – FSDT ONLY
7-Shelf Multi-Purpose Rack Model FSDT7SMP
4-Tier Circle Rack Model FSDT4TCR
5-Ti
er Circle Rack Model FSDT5TCR
4-Tier Pan Rack Model FSDT4TPR
3-Shelf Angle Rack Model FSDT3SAR
5-Shelf Angle Rack Model FSDT5SAR
3-Tier Pretzel Tree Model FSDT3TPT
Merchandising Display Sign Holder with Acrylic Window
Merchandising Display Sign: Pizza or Chicken
Food Graphic Adhesive Decals (3 per set): Pizza, Chicken, Pretzel,
or Croissants/Biscuits
4" (102 mm) Adjustable Legs
Perforated Pizza Pans – 14", 15", 16",
or 18" (356, 381, 406, 457 mm) Diameter
Half
-size Sheet Pan
Motorless Rack Coupling (For -X Models only)
* Models FSD-1, FSD-2, FSDT-1, and FSDT-2 include rack display motor. Models with “X” designator do
not have revolving display.
†
Rack shown is included with unit. Other racks available, see
Display Rack Selection
.
Model* Type Rack Style
†
Shipping Weight
FSD-1 1 Door 3-Tier Circle Rack w/Motor 113 lbs. (51 kg)
FSD-1X 1 Door 3-Tier Pan Rack w/o Motor 111 lbs. (50kg)
FSD-2 2 Doors 3-Tier Circle Rack w/Motor 114 lbs. (
52 kg)
FSD-2X 2 Doors 3-Tier Pan Rack w/o Motor 112 lbs. (51 kg)
SPECIFICATIONS
Standard Models
Model* Type Rack Style
†
Shipping Weight
FSDT-1 1 Door 4-Tier Circle Rack w/Motor 120 lbs. (54 kg)
FSDT-1X 1 Door 4-Tier Pan Rack w/o Motor 118 lbs. (54kg)
FSDT-2 2 Doors 4-Tier Circle Rack w/Motor 122 lbs. (55 kg)
FSDT-2X 2 Doors 4-Tier Pan Rack w/o Motor 120 lbs. (54 kg)
Tall Models
DIMENSIONS
FSD-1, -1X: 22.42"W x 24.11"D x 27.54"H* (569 x 612 x 700 mm).
FSDT-1, -1X: 22.42"W x 24.11"D x 32
.54"H* (569 x 612 x 827 mm).
FSD-2, -2X: 22.42"W x 25.36"D x 27.54"H* (569 x 645 x 700 mm).
FSDT-2, -2X: 22.42"W x 25.36"D x 32.54"H* (569 x 645 x 827 mm).
Cabinet Openings: FSD – 18.98"W x 18.73"H (482 x 476 mm).
FSDT – 18.98"W x 23.73"H (482 x 603 mm).
* Add 1" (25 mm) to height for display sign.
VOLTAGE
120 volts, 60 Hz, 1440 watts,
12.0 amps standard uses
NEMA 5-15P. Export voltages
available.
5-Shelf Multi-Purpose Rack
Model FSD5SMP
Rack Opening:
2.5" (64 mm)
7-Shelf Multi-Purpose
Rack
Model FSDT7SMP
Rack Opening:
2.5" (64 mm)
3-Shelf Angle Rack
Model FSDT3SAR
Rack Opening:
3.5" (89 mm)
Rack shelves slant at
15° angle
5-Shelf Angle Rack
Model FSDT5SAR
Rack Opening:
2.5" (64 mm)
3-Tier Pretzel Tree
Model FSDT3TPT
Rack Opening:
5.88" (150 mm)
3-Tier Circle Rack
Model FSD3TCR
Rack Opening:
4.63" (118 mm)
4-Tier Circle Rack
Model FSDT4TCR
Rack Opening:
4.63" (118 mm)
5-Tier Circle Rack
Model FSDT5TCR
Rack Opening:
3.63" (93 mm)
3-Tier Pan Rack*
Model FSD
3TPR
Rack Opening:
3.5" (89 mm)
4-Tier Pan Rack*
Model FSDT4TPR
Rack Opening:
3.5" (89 mm)
Display Rack Selection
PRODUCT SPECS
Holding and Display Cabinet
The humidity controlled Holding and Display Cabinet shall be
a Flav-R-Savor
®
Model ...., rated at ....volts and ....watts, as manufactured by the
Hatco Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 parts and service assistance (U.S. and Canada only), the
cabinet
shall have ....door(s), tempered glass sides, st
ationary
rack (or revolving display), and fluorescent display lights. It shall include
a water reservoir, humidity selector switch, temperature selector dial,
on-off switch, indicating lights, and a 6' (1829 mm) cord with
plug attached.
Accessories shall include adjustable legs, display racks, pans, merchandising
display sign(s), and food graphic decals.
* Accommodates half-size
sheet pans (not included).
BS-1363CEE 7/7 SchukoNEMA 5-15P
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. FSD Spec Sheet
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon
(GPG) (.75 grains of hardness per liter) must be treated and
softened before being used. Water containing over 3.0 GPG
(.75 GPL) will decrease the eff
iciency and reduce the
operating life of the unit.
Note:Product failure caused by liming or sediment
buildup is notcovered under warranty.
CORD LOCATION
Facing controls, right-hand side panel,
lower right corner.
PLUG CONFIGURATIONS
Printed in U.S.A.
August 2009
3-Shelf Angle Rack
Rack Opening: 3.5” (89mm)
Rack shelves slant at 15° angle
ITEM#
FLAV-R-SAVOR
®
HOLDING & DISPLAY CABINETS
Models FSD-1, FSD-1X, FSD-2, FSD-2X FSDT-1, FSDT-1X, FSDT-2, FSDT-2X
22.42" (569 mm)
24.11" (612 mm)
Models -2 & -2X only
25.36" (645 mm)
Models FSD
27.54"
(700 mm)
*
Models FSDT
32.54"
(827 mm)
*
SIDE VIEW
FRONT VIEW
OPTIONS (NOT FOR RETROFIT)
Designer Colors: Warm Red, Black, Gray Granite, White Granite,
Navy Blue, Hunter Green, Antique Copper
7.5”H (191 mm) Merchandising Display Sign Holder with
Acrylic Window (one per side) (sign not included)
ACCESSORIES
Racks – FSD ONLY
5-Shelf Multi-Purpose Rack Model FSD5SMP
3-Tier Circle Rack Model FSD3TCR
3-Tier Pan Rack Model FSD3TPR
Racks – FSDT ONLY
7-Shelf Multi-Purpose Rack Model FSDT7SMP
4-Tier Circle Rack Model FSDT4TCR
5-Ti
er Circle Rack Model FSDT5TCR
4-Tier Pan Rack Model FSDT4TPR
3-Shelf Angle Rack Model FSDT3SAR
5-Shelf Angle Rack Model FSDT5SAR
3-Tier Pretzel Tree Model FSDT3TPT
Merchandising Display Sign Holder with Acrylic Window
Merchandising Display Sign: Pizza or Chicken
Food Graphic Adhesive Decals (3 per set): Pizza, Chicken, Pretzel,
or Croissants/Biscuits
4" (102 mm) Adjustable Legs
Perforated Pizza Pans – 14", 15", 16",
or 18" (356, 381, 406, 457 mm) Diameter
Half
-size Sheet Pan
Motorless Rack Coupling (For -X Models only)
* Models FSD-1, FSD-2, FSDT-1, and FSDT-2 include rack display motor. Models with “X” designator do
not have revolving display.
†
Rack shown is included with unit. Other racks available, see
Display Rack Selection
.
Model* Type Rack Style
†
Shipping Weight
FSD-1 1 Door 3-Tier Circle Rack w/Motor 113 lbs. (51 kg)
FSD-1X 1 Door 3-Tier Pan Rack w/o Motor 111 lbs. (50kg)
FSD-2 2 Doors 3-Tier Circle Rack w/Motor 114 lbs. (
52 kg)
FSD-2X 2 Doors 3-Tier Pan Rack w/o Motor 112 lbs. (51 kg)
SPECIFICATIONS
Standard Models
Model* Type Rack Style
†
Shipping Weight
FSDT-1 1 Door 4-Tier Circle Rack w/Motor 120 lbs. (54 kg)
FSDT-1X 1 Door 4-Tier Pan Rack w/o Motor 118 lbs. (54kg)
FSDT-2 2 Doors 4-Tier Circle Rack w/Motor 122 lbs. (55 kg)
FSDT-2X 2 Doors 4-Tier Pan Rack w/o Motor 120 lbs. (54 kg)
Tall Models
DIMENSIONS
FSD-1, -1X: 22.42"W x 24.11"D x 27.54"H* (569 x 612 x 700 mm).
FSDT-1, -1X: 22.42"W x 24.11"D x 32
.54"H* (569 x 612 x 827 mm).
FSD-2, -2X: 22.42"W x 25.36"D x 27.54"H* (569 x 645 x 700 mm).
FSDT-2, -2X: 22.42"W x 25.36"D x 32.54"H* (569 x 645 x 827 mm).
Cabinet Openings: FSD – 18.98"W x 18.73"H (482 x 476 mm).
FSDT – 18.98"W x 23.73"H (482 x 603 mm).
* Add 1" (25 mm) to height for display sign.
VOLTAGE
120 volts, 60 Hz, 1440 watts,
12.0 amps standard uses
NEMA 5-15P. Export voltages
available.
5-Shelf Multi-Purpose Rack
Model FSD5SMP
Rack Opening:
2.5" (64 mm)
7-Shelf Multi-Purpose
Rack
Model FSDT7SMP
Rack Opening:
2.5" (64 mm)
3-Shelf Angle Rack
Model FSDT3SAR
Rack Opening:
3.5" (89 mm)
Rack shelves slant at
15° angle
5-Shelf Angle Rack
Model FSDT5SAR
Rack Opening:
2.5" (64 mm)
3-Tier Pretzel Tree
Model FSDT3TPT
Rack Opening:
5.88" (150 mm)
3-Tier Circle Rack
Model FSD3TCR
Rack Opening:
4.63" (118 mm)
4-Tier Circle Rack
Model FSDT4TCR
Rack Opening:
4.63" (118 mm)
5-Tier Circle Rack
Model FSDT5TCR
Rack Opening:
3.63" (93 mm)
3-Tier Pan Rack*
Model FSD
3TPR
Rack Opening:
3.5" (89 mm)
4-Tier Pan Rack*
Model FSDT4TPR
Rack Opening:
3.5" (89 mm)
Display Rack Selection
PRODUCT SPECS
Holding and Display Cabinet
The humidity controlled Holding and Display Cabinet shall be
a Flav-R-Savor
®
Model ...., rated at ....volts and ....watts, as manufactured by the
Hatco Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 parts and service assistance (U.S. and Canada only), the
cabinet
shall have ....door(s), tempered glass sides, st
ationary
rack (or revolving display), and fluorescent display lights. It shall include
a water reservoir, humidity selector switch, temperature selector dial,
on-off switch, indicating lights, and a 6' (1829 mm) cord with
plug attached.
Accessories shall include adjustable legs, display racks, pans, merchandising
display sign(s), and food graphic decals.
* Accommodates half-size
sheet pans (not included).
BS-1363CEE 7/7 SchukoNEMA 5-15P
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. FSD Spec Sheet
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon
(GPG) (.75 grains of hardness per liter) must be treated and
softened before being used. Water containing over 3.0 GPG
(.75 GPL) will decrease the eff
iciency and reduce the
operating life of the unit.
Note:Product failure caused by liming or sediment
buildup is notcovered under warranty.
CORD LOCATION
Facing controls, right-hand side panel,
lower right corner.
PLUG CONFIGURATIONS
Printed in U.S.A.
August 2009
  • Page 1 1
  • Page 2 2

Merco / Savory HMC-1 Datasheet

Merco / Savory
Brand
Merco / Savory
Model
HMC-1
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents