Merco / Savory DC-4 Operating instructions

Brand: Merco / Savory

Model: DC-4

Type: Operating instructions

INSTALLATION & OPERATION MANUAL for Model DC-4

Display Case

THIS MANUAL SHOULD BE RETAINED FOR FUTURE USE

0201-JDM 437077

NOTE: Upon receipt of this unit, immediately unpack and inspect for possible concealed

shipping damage. If unit is found to be damaged, save all packing materials and contact your

delivery carrier within 5 days. Refer to “Shipping Damage Instructions” enclosed for detailed

instructions. Failure to follow these instructions will negate Merco/Savory’s or your ability to

file claims and receive compensation for shipping damage.

This manual contains important safety and installation-operation instructions. Require all operators to read this

manual before using the unit. Failure to follow the instructions contained in this manual may cause injury, dam-

age to the unit, and will void the warranty.

Merco/Savory’s Display Cabinets are manufac-

tured from heavy-duty aluminum alloy and

stainless steel for long life and easy cleaning.

They offer a large capacity for merchandising

product while conserving valuable counter space.

An insulated heat cable in the base is coupled

with a calrod upper heating element to provide

gentle warming. Fan-forced air circulation

assures thorough, even warming with no hot

spots. Warming is regulated with an adjustable

thermostatic heat control and can be monitored

with the built-in cabinet temperature gauge.

Bright incandescent illumination is provided to

enhance product appearance. Standard pizza

rack holds up to four 14-inch pizzas. On/Off

switch with integrated pilot light and 6-foot

cordset are furnished for convenience and easy

installation.

Options include separate adjustable humidity

control with water level warning lights, motorized

revolving rack, doors on both sides for self

service, 4-level shelf, pretzel rack and colorful

“pizza” merchandising signs.

OPTIONAL HUMIDITY CONTROL

GENERAL INFORMATION

The Merco/Savory Display Case, Model DC-4 is designed to be both efficient and stylish. Loading and unloading food

items is easy. Simply open the door and place the pizza pan or food on the rack. Closing the door activates the switch,

allowing the rack to begin turning.

Warm air is circulated around the display case in conjunction with base heat insuring the food product will be served warm.

Two (2) Illuminating lamps make the Merco/Savory Display Case an eye catching display.

Stainless Steel and Aluminum throughout the construction of the Merco/Savory Display Case make this a strong and

durable piece of equipment for the most demanding needs.

The Merco/Savory Display Case come equipped with a cordset.

INSTALLATION

GENERAL

1. Check the specification data plate for the correct model number, voltage and wattage.

2. Check to insure that the electric circuit being used to supply electricity to the unit has a sufficient amperage rating.

CAUTION

DISCONNECT POWER WHEN REPLACING OR

SERVICING HEATING ELEMENTS AND LAMPS

3. Place the DC-4 in the most convenient location for ease of cleaning, maintenance and general operation.

4. When installing this unit, avoid locations with drafts, close proximity to grease or vapor-producing appliances, or other

high ambient heat equipment.

5. Allow sufficient overhead clearance for heat. Dissipation.

OPERATION

1. ON/OFF SWITCH CONTROLSLIGHTS, TRANSVERSE FLOW BLOWER AND SUPPLIES MAIN POWER TO ALL

OTHER CONTROLS.

2. THERMOMETER DIAL INDICATES AMBIENT TEMPERATURE INSIDE UNIT.

3. CONTROL KNOB CONTROLS AMBIENT TEMPERATURE INSIDE UNIT.

4. PILOT LIGHT NOTIFIES OPERATOR TO ADD WATER.

5. PILOT LIGHT NOTIFIES OPERATOR TO STOP ADDING WATER.

6. CONTROL KNOB CONTROLS AMOUNT OF HUMIDITY IN UNIT.

7. PILOT LIGHT NOTIFIES OPERATOR WHEN HUMIDITY IS IN OPERATION.

CLEANING INSTRUCTIONS

WARNING

ALLOW YOUR UNIT TO

COOL BEFORE ATTAMPTING

ANY CLEANING PROCEDURES

CAUTION

BE SURE TO DISCONNECT

POWER SOURCE WHEN

CLEANING UNIT

EXTERIOR OF UNIT

1. The Stainless Steel exterior of the DC-4 may be cleaned with a soft, damp, soapy cloth or sponge. Be careful not to

scratch the surface.

2. Rinse with a clean, damp, soft cloth or sponge.

3. Clean windows with appropriate glass cleaner.

RACK

1. *Remove rack from unit.

2. Wash with a soft, damp, soapy cloth or sponge. Be careful to not scratchj the surface.

3. Rinse with a clean, damp, soft cloth or sponge.

INTERIOR OF UNIT

1. Wash with a soft, damp, soapy cloth or sponge. Be careful not to scratch the surface.

2. Rinse with a clean, damp, soft cloth or sponge.

3. Clean windows with appropriate glass cleaner.

*= See rack removal next page.

RACK REMOVAL AND INSTALLATION

PIZZA RACK

pressure until rack clears adapter (b) lean rack towards door and remove.

PRETZEL RACK

To remove pretzel rack (not shown), remove hairpin cotter key (a) from adapter (b) slide

adapter up until it clears the rack. Lean the rack towards the door and remove. Replace

cotter key.

FOOD RACK

To remove food rack (not shown), grasp rack and lift up and pull out of unit.

To install racks, simply follow above steps in reverse order.

WARRANTY

Ninety (90) day warranty on labor and one (1) year on parts from date of purchase, (excluding light bulbs and lamps). A

warranty registration card is provided with each unit. Complete all requested information on this card and return to Merco/

Savory to insure proper warranty registration. Warranty Service must be provided by an Authorized Merco/Savory Service

Agency.

1111 N. Hadley Rd.

Fort Wayne, In. 46804

Tel. 800-701-2992

Fax (219) 436-0735 www.mercosavory.com

Merco / Savory DC-4 Operating instructions

Merco / Savory DC-4 Operating instructions

Merco / Savory DC-4 Operating instructions

Related papers

Other documents