Dale Tiffany TT100273 Operating instructions

Hello! I am an AI chatbot trained to assist you with the Dale Tiffany TT100273 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

ASSEMBLY INSTRUCTIONS:

Item No: TT100273

1. Place the lamp base (A) on a level surface.

2. Screw the threaded rod (C) into socket assembly (B).

3. Adjust the knurl nut (D) onto the threaded rod (C).

This can be used to raise the shade a little if

necessary.

4. Place shade (E) over threaded rod (C), and tighten

finial (F) securing the shade in place.

5. Insert bulbs into the bulb socket.

To Replace the Night Light

1. Gently remove finial (F), shade (E), and threaded

rod (C).

2. Turn the base upside down, loosen screws nuts (G)

and slide base (A) off shade (H) and replace bulb.

3. Place shade (H) over base (A) and tighten screw

nuts (G) securing the shade in place.

Recommended (2) maximum 60 WATT Type “A” Bulbs or (2) maximum 13WATT CFL Bulbs

(Bulbs not included)

Recommended (1) 25Watt, Type “B” Bulb or maximum (1) 13Watt, CFL Bulb

(Bulb included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth.

Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision – 08/03/12

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.