Baldor-Reliance Reducer Oil Conversion Mobil SHC634 to Kluber UH1-6-460 Owner's manual

Type
Owner's manual

Baldor-Reliance Reducer Oil Conversion Mobil SHC634 to Kluber UH1-6-460

This conversion kit allows you to change the oil in your Baldor-Reliance reducer from Mobil SHC634 to Kluber UH1-6-460. Kluber UH1-6-460 is a synthetic polyglycol oil that is compatible with the bladder material in your reducer.

Benefits of using Kluber UH1-6-460:

  • Extended oil life: Kluber UH1-6-460 has a longer oil life than Mobil SHC634, which means you can save money on maintenance costs.
  • Improved performance: Kluber UH1-6-460 provides better lubrication and protection for your reducer's gears and bearings, which can lead to improved performance and a longer lifespan for your reducer.

Baldor-Reliance Reducer Oil Conversion Mobil SHC634 to Kluber UH1-6-460

This conversion kit allows you to change the oil in your Baldor-Reliance reducer from Mobil SHC634 to Kluber UH1-6-460. Kluber UH1-6-460 is a synthetic polyglycol oil that is compatible with the bladder material in your reducer.

Benefits of using Kluber UH1-6-460:

  • Extended oil life: Kluber UH1-6-460 has a longer oil life than Mobil SHC634, which means you can save money on maintenance costs.
  • Improved performance: Kluber UH1-6-460 provides better lubrication and protection for your reducer's gears and bearings, which can lead to improved performance and a longer lifespan for your reducer.
Baldor Electric Company
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.646.4711, Fax (1) 479.648.5792, International Fax (1) 479.648.5895
www.baldor.com
© Baldor Electric Company
LT0066A10
All Rights Reserved. Printed in USA.
7/14
Important Note: Polyglycol oil is not compatible with the
bladder material, and may cause degradation and failure of
the expansion bladder. The bladder must be removed and the
housing port plugged using the included hardware.
DISASSEMBLY AND BLADDER REMOVAL
1. Drain the oil from the reducer.
2. Wrap output shaft with electrical tape to prevent damage
to the seal lip.
3. Remove the bolts holding the side covers.
4. Remove the gear shaft assembly and side covers, taking
care not to damage the shim gaskets. Be sure to keep the
shims with the cover on which they are installed. Failure to
do so will result in improper positioning of the gear.
5. Remove the nut and sealing washer holding the bladder in
place.
6. Remove and discard the nylon bladder support arch
(if present) and bladder.
Note: It is not necessary to remove the worm shaft.
7. Thoroughly clean and ush all parts.
8. Remove the red bladder warning sticker.
PLUG INSTALLATION AND RE-ASSEMBLY
1. Insert 1/4-20 screw through the housing port from the
inside.
2. Install sealing washer & nut, and tighten rmly.
3. Re-assemble the reducer making sure to keep the shims
with their proper side cover. Failure to do so will result in
improper positioning of the gear.
4. Tighten the bolts in an alternating pattern.
5. Rell with the appropriate quantity of polyglycol oil, refer to
Table 1.
Note: In most cases, the kit contains more oil than is required.
Discard any remaining oil.
6. Place the yellow Klubersynth UH-1 6-460 sticker on the
reducer in a conspicuous location.
Polyglycol Retro-Fill Instructions
Table 1
Frame Qty. Frame Qty.
913 7 oz 926 32 oz
915 11 oz 930 53 oz
918 16 oz 932 68 oz
921 20 oz 938 93 oz
924 28 oz
  • Page 1 1

Baldor-Reliance Reducer Oil Conversion Mobil SHC634 to Kluber UH1-6-460 Owner's manual

Type
Owner's manual

Baldor-Reliance Reducer Oil Conversion Mobil SHC634 to Kluber UH1-6-460

This conversion kit allows you to change the oil in your Baldor-Reliance reducer from Mobil SHC634 to Kluber UH1-6-460. Kluber UH1-6-460 is a synthetic polyglycol oil that is compatible with the bladder material in your reducer.

Benefits of using Kluber UH1-6-460:

  • Extended oil life: Kluber UH1-6-460 has a longer oil life than Mobil SHC634, which means you can save money on maintenance costs.
  • Improved performance: Kluber UH1-6-460 provides better lubrication and protection for your reducer's gears and bearings, which can lead to improved performance and a longer lifespan for your reducer.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI