Kyosho KFW006 KF01 Ball Diff. Set User manual

Brand: Kyosho

Model: KFW006 KF01 Ball Diff. Set

Type: User manual

Before commencing assembly, please read these instructions thoroughly!

PRINTED IN JAPAN

64271010-2

*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

htpp://www.kyosho.com

KFW006

for KF01

INSTRUCTION SHEET

No.KFW006

Thank you for purchasing this product. Before installation, please carefully read and follow the instructions on this sheet

in conjunction with the instruction manual of your kit.

Firmly tighten the set screws

onto the at spot.

Ball Diff. Set

Symbols used throughout the instruction manual, comprise:

Apply grease.

Apply threadlocker

(screw cement).

Must be purchased

separately!

Assemble in the

specified order.

1/8

Diff Ball

1/8

Diff Ball

Note the direction

Diff Washer

4.8x10mm

5mm

Thrust Bearing

4.8x10mm

Thrust Bearing

Taper Washer

6x10mm

Bearing

6x10mm

Bearing

6x10mm

Bearing

5x10mm

Bearing

5x10mm

Bearing

4x 4mm

Set Screw

Too loose Diff slips.(Power loss) Tighten

Ideal Diff dosen't slip.(Smooth)

Too tight Diff dosen't work. Loosen

To find the appropriate ball diff setting, make small adjustments

and check by running the car. Please also refer to the below chart.

Ball diff can be adjusted by tightening or loosening

the wheel nut.

SPARE PARTS

Set Screw(M4x4/10pcs)

Shield Bearing(5x10x4)4Pcs

Shield Bearing(6x10x3)2Pcs

Ball Diff. Shaft

Thrust Bearing(4.8x10x4)1Pcs

Diff. Ball(1/8 Inch/10Pcs/SPADA09)

Thrust Diff. Ring(2Pcs/TF-5)

Kyosho KFW006 KF01 Ball Diff. Set User manual

Kyosho KFW006 KF01 Ball Diff. Set User manual

Kyosho KFW006 KF01 Ball Diff. Set User manual

Related papers

Other documents