Network Controller for 4K HDMI® over IP Model 29977
Overview:
The C2G Network Controller for 4K HDMI over IP (29977) is a
Linux-based PC that allows users to control hub-installed
C2G AV over IP products> the 29977 may be managed via a
Web interface or the C2G AVoIP Control Smartphone &
Tablet App (29986).
When installed on a local area network (LAN), the C2G
Network Controller will scan the LAN for connected C2G AV
over IP products allowing the user to auto-discover, configure,
manage connectivity and support firmware upgrades for the
AV over IP devices through the 29977 Web interface. The
Network Controller may also be managed by the C2G AVoIP
Control App (29986) for a more user-friendly experience.
An Application Program Interface (API) is available supporting
several third-party partner control applications running on
smartphones and tables.
Applications:
• Commercial and residential AV systems
• Digital signage
• Multi-room systems
• Retail systems
• Collaborative PC systems
• Medical information systems
Key Features:
• Centralized control of C2G AV over IP devices
• Managed via Web Interface
• May be managed by C2G AVoIP Control App (29986)
• Manages AV over IP device auto-discovery, configuration and
connectivity
• Supports video wall and multiview connectivity
• Supports connectivity, video wall and multiview presets
• Centralized management of AV over IP device firmware updates
Specifications
CPU
Intel Celeron J1800 Processor, @ 2.41GHz 4 cores
Memory
2GB DDR3
Display
Integrated Intel HD Graphics, 1x HDMI and 1x VGA
Keyboard and Mouse
USB keyboard and mouse (not required and not included)
Peripherals
• USB 2.0 ports (3x)
• SS USB 3.0 port (1x)
• Network gigabit interface (2x)
• VGA Video out port (1x)
• HDMI Video out port (1x)
• Audio in via 3.5mm port (1x)
• Audio out via 3.5mm port (1x)
• RS232 port (1x)
Operating System
Ubuntu 18.04 LTS
Temperature/Humidity
Operating: 0 ºC to 50 ºC, Storage: -20 ºC to 80 ºC
Humidity: 10% to 90% (non-condensing)
Dimensions
5.24 x 5.00 x 1.38 inch (133 x 127 x 35 mm)
Weight
1.5lbs (0.7kg)
Accessories Included
External 12VDC @ 2A Power Adaptor
Regulatory
FCC, CE, RoHS, WEEE
Order Information
29977 Network Controller for 4K HDMI over IP
Network Controller for 4K HDMI® over IP Model 29977
Typical Application
FCC Statement
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Statement - §15.105(b):
"This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution - §15.21:
"Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment."
© 2019 Legrand All Rights Reserved rev.03/20 DS_29977
6500 Poe Avenue
Dayton, OH 45414
Phone 800.293.4970
www.c2g.com
/