KRAUS KSD42SS Installation guide

Brand
KRAUS
Model
KSD42SS
Type
Installation guide
Soap and Lotion
Dispenser
KSD
Item NO.:
CH
BN
ORB
GRB
Tools and Supplies you will need:
Adjustable Wrench
Dimensions:
Overall Heigh
Diameter : 2.2”
Spout Heigh
Spout
1.800.775.0703
customerservice@kraususa.com
www.kraususa.com
Soap and Lotion Dispenser
KSD
-42
-42
t: 11.0”
t: 2.3”
Reach: 3.4”
Step 2
Install dispenser base
(2) into hole (either
on escutcheon plate
or in countertop). Reinstall
flat washer B (4) and nut (5)
from underneath sink or countertop. Tighten
with adjustable wrench until snug
Soap Bottle (6)
Nut (5)
Flat washer B (4)
Flat Washer A (3)
Dispenser
Base (2)
Brass Pump
Head (1)
Step 1
Remove soap bottle (6) from dispenser base (2). Pull pump head (1) out of
dispenser base (2). Unthread nut (5) from the bottom of dispenser base (2) and
remove flat washer B (4)
Step 3
Thread soap bottle (6)
onto dispenser base
(2) from underneath
sink or countertop.
Hand-tighten only
Step 4
Fill soap bottle
(6) from top with
8 ounces of soap
or lotion
Step 5
Insert pump head
(1) into dispenser
base (2) from top
  • Page 1 1

KRAUS KSD42SS Installation guide

Brand
KRAUS
Model
KSD42SS
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents