RAMPAGE PRODUCTS 26628 Installation guide

Brand
RAMPAGE PRODUCTS
Model
26628
Type
Installation guide

RAMPAGE PRODUCTS 26628 is a slimline 2" sidebar with step, designed for Jeep JK 4-door models manufactured from 2007 onwards. It provides a secure and convenient step for easier access to the vehicle's interior, making it particularly useful for lifted Jeeps or those with larger tires. The sidebar is constructed from durable materials and is designed to withstand the rigors of off-road use. Installation is relatively straightforward and can be completed with basic tools and the help of an assistant.

RAMPAGE PRODUCTS 26628 is a slimline 2" sidebar with step, designed for Jeep JK 4-door models manufactured from 2007 onwards. It provides a secure and convenient step for easier access to the vehicle's interior, making it particularly useful for lifted Jeeps or those with larger tires. The sidebar is constructed from durable materials and is designed to withstand the rigors of off-road use. Installation is relatively straightforward and can be completed with basic tools and the help of an assistant.

Warranty Information
Rampage products, Inc. warrants to the original purchaser of any step product it manufactures, that the product will be free of defects in material or
workmanship for a period of 1 year from date of purchase. Such obligations under this warranty shall be limited to the repair or replacement, at Rampage
products discretion, of any assembly or parts which, upon examination by Rampage products, Inc. proves to be defective. All defective items must be
returned with proof of purchase to Rampage products, Inc., freight prepaid. This warranty does not cover damage resulting from abuse, misuse, alteration,
accident or damage in transit. Rampage products obligations under this warranty are limited to the aforementioned repair or replacement of warranty
defects for which the return authorization has been received during the warranty period, and Rampage products, Inc. shall not be liable for any incidental
or consequential damages arising from breech of this or any implied warranty.
Rampage Products 22420 Temescal Canyon Rd. Ste “C”, Corona, CA 92883 Phone: (951) 277-4949 Fax: (951) 277-2295
www.rampageproducts.net
3
RAMPAGE
P R O D U C T S
26628 Slimline 2” Sidebar with Step
Jeep JK 4 door, 2007-
Hardware:
M12x100mm hex bolt---4
35mm OD, 12mm Id washer---4
M6x35mm Hex bolt---4
15mm OD, 6mm Id washer---8
M6 hex nut---4
M6 Lock washer—6
Step bar
6mm x 35 bolt/nut/
washers
“U” Stiffener
Rear mount
Lock washer
Installation:
1) Review components and instructions.
Set out the driver side and passenger
side bars. Split hardware between the
two sides.
2) Remove the factory body mounting
bolts at the front and middle of the
driver side.
3) Have a helper hold the side bar onto
the side of the vehicle and attach the
middle mount using the included
10mm bolt/washer. leave bolt lightly
tightened for now. Now attach the
front mount the same way.
4) Attach the rear mount using the
hardware and “U” Channel stiffener as
shown in Fig. A.
5) Tighten all fasteners and then repeat
procedure for other side.
Fig. A
NOTE: Rubicon models will have to remove the
factory rock slider for installation of these steps.
  • Page 1 1

RAMPAGE PRODUCTS 26628 Installation guide

Brand
RAMPAGE PRODUCTS
Model
26628
Type
Installation guide

RAMPAGE PRODUCTS 26628 is a slimline 2" sidebar with step, designed for Jeep JK 4-door models manufactured from 2007 onwards. It provides a secure and convenient step for easier access to the vehicle's interior, making it particularly useful for lifted Jeeps or those with larger tires. The sidebar is constructed from durable materials and is designed to withstand the rigors of off-road use. Installation is relatively straightforward and can be completed with basic tools and the help of an assistant.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents